Chokrane jazilane,👍👍👍 Thanks for the video, I need to make a golf 6 tdi 2011 and clio 3 key, how to get wiring diagrams to read the pin codes needed for key production. I have iprog plus. Thanks in advance.
Hello, I have just bought the black iprog +, but I still have the message Programmer not connected, I have changed my PC and the usb cable is still the same. I checked the voltage I have 5v on the usb port but no voltage on the large connector neither 5v nor 12v as in diagram. thank you for helping me
hallo after an update in the house renault is blocked at 99% now the car does not start anymore, I have read all Upd with i-prog do you have an original file?
👍 👍 👍 Good vidéo I need your help, my iprog ++ is not detected, driver installed correctly, in windows xp, 7 and 8. Every time the same problem, Message : Programmer not connected. Thanks in advance for your help.
Does the iprog has the indications about where to weld the wires?
Hi, I'm from Portugal, I bought 1 iprog, and a want to program a key on a Laguna. It's the same thing correct?
Chokrane jazilane,👍👍👍
Thanks for the video, I need to make a golf 6 tdi 2011 and clio 3 key, how to get wiring diagrams to read the pin codes needed for key production. I have iprog plus. Thanks in advance.
Hello,
I have just bought the black iprog +, but I still have the message Programmer not connected, I have changed my PC and the usb cable is still the same.
I checked the voltage I have 5v on the usb port but no voltage on the large connector neither 5v nor 12v as in diagram.
thank you for helping me
thanks for the video, is the boot data for only iprog or can we use it for xprog also thanks
Where you know of pin soldered
hallo after an update in the house renault is blocked at 99% now the car does not start anymore, I have read all Upd with i-prog do you have an original file?
الله يرحم الوالدين
من افضل carprog vs iprog
ارغب في شراء iprog صينية فهل يمكن الاعتماد عليها وياليت موقع صيني معين يبيع هذه المبرمجة بجودة تعرفون انها كما ينبغي
www.aliexpress.com/item/1005001762133331.html?spm=a2g0o.productlist.0.0.6723464dTaH9M3&algo_pvid=df10a418-4506-40cd-a4ef-cc7b0dcadc0d&algo_expid=df10a418-4506-40cd-a4ef-cc7b0dcadc0d-10&btsid=0bb0622a16146786579648117e5aab&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
اخي كيف تعرف اماكن توصيل الاسلاك على ecu
which cable did you use?
thank
مرحبا! هل يمكن أن تتم هذه القراءة عبر obd مع IPROG؟
لا للاسف
How to program Toyota all key lost in Iprog+
متى نقوم بهذه العملية لو سمحت
clon iprog?
Yes
👍 👍 👍 Good vidéo
I need your help, my iprog ++ is not detected, driver installed correctly, in windows xp, 7 and 8. Every time the same problem,
Message : Programmer not connected.
Thanks in advance for your help.
güzel video :)
can you help me to read nec d78f0515a mcu
Ok I'll
Pinouts please