Hi - I want to make a pyramid from stainless steel wire and came across your video, thanks. So if my pyramid was 1 meter square at the base, each leg would be 952mm ? Is this the golden ratio?
Why multiply by 0.952? Any explanation? Ans: I did trig calculations. Here is solution: sqrt((1+ sqr(cos)/(4*sqr(cos). If angle is 51.51.51, then the multiplier comes to 0.9516. - 51.51.51 = 51 + (51÷60) + (51÷3600) - On calculator... √((1+(cos(51.8641666667)^(2)))÷(4 ×(cos(51.8641666667)^(2))) = 0.9516205676
@@cenation319 the pyramid may still work. But for accurate angles, did you take measurements correctly? You can cross verify the measurements. I have no device to check the angles. Just used trigonometry to get the length of the sides.
Very well explained. Just prepared one, came out well. Thank you mam🙏🏼
Thank you so much for this great video lots of blessings.🙌
Wonderful 🙏🙏🙏👍👍👍
Excellent, educational video.
Very nice. Thank you for showing ma’am 🙏🏻
Great God bless you dear sister
Hi - I want to make a pyramid from stainless steel wire and came across your video, thanks. So if my pyramid was 1 meter square at the base, each leg would be 952mm ? Is this the golden ratio?
👏👏👏
Great madam.
Is it possible to buy from somewhere wooden or plastic coloured pyramids of ""accurate size"" ( as u mentioned)from 6" to 10" square base.
Super . Thank you Mam
Good information, jai hind, jai bharat india
Hello Madam, I want to make a pyramid room for meditation on the roof of my room. Can you guide which materials can be used ?
Perfect👍👍👍👌
Hi thank you for your video, question, can I use the same formula with inches? And how you come up with that formula? Thank you 🙏🖖
Hlo mam can you please tell me how to measure 9.52. Which scale I have to used .
9.52 is a constant only. take any measuring tool. Multiply with base which is you select the size of Pyramid
Very good explanation
Amazing Madam many many thanks very easy method and understanding🙏🙏🙏
Thank you master🙏🙏🙏😍
Do you keep the Sacred angle 51 degree, 51 minutes and 51 seconds
Thank you, this is so simple ❤
Super Thanks Mam Very nice
Great thanks a lot 🙏
Nice 🙏🏻👌🏻
👌👌👌nice
Thanks a lot mam. Helpful
Perfect
Thank you Ma'am....🙏
What angle did you end up with
Very useful, thank you
Thank you mam❤️
Super mam
Thank you 🙏🙏
Thank you. 🙏❤
Good - RV
Thank you Mam!
அருமை
Thank u mam 🙏🙏🙏🌹
Tanku so much madam 🙏🙏💯
How to measure 19.04 cm ? Please guide.
👏👏👏🙏🙏🙏
Thank you 🙏☺️
Thank u Thank u Thank u🙏
Maddam how can you draw 19.04 cm ?? I mean how could u exactly draw this...
Is this miniature of the Giza Pyramid?(Golden ratio calculation of Giza?)
Good.
Thanks Mam
Easy and simple
TQ ❤️👌🙏👍
Thank you very much
Thank you so much mam
धन्यवाद मास्टर धन्यवाद
Why not take base as 21 and side 20. To make it easy. Is it wrong. Please reply
You won't get perfect angle
Thank you 🙏
Thank you
Thanks.
❤ Thanks
Thankyou mam
19.4 is different from 19.04, is it not
thank you have a great day
Tq Madam
Thanks🙏
Thanks
Explained beautifully
❤
19.4 or 19.04?
You have missed a point. The base of the triangle always should out of two equal sides.
It is good,, good explanation,, but expert believe base corner perfect Angel is must 51'' digress,, so how to adgest length of height,,,,
gooood
🙏🌹
Thank you mam please make vedio how to make pyramid cap for meditation please mam please🙏🙏
Please prepare s cone shape pyramid
Please upload Cooper rod pyramid making video
19.4cm or 19.04cm?
19.04
Why 0.952?
Side length is not 19.4 it is 19.04
U R appreciated
If i am right
U R an engineer or a maths teacher
What did you understand about measurement.. Tell me first..
will y send me ONE PLEASE
Madam bade size ka bataiye yah to bacchon ki size ka hai
Mam hindi me chaye ye video
Why multiply by 0.952? Any explanation?
Ans: I did trig calculations. Here is solution: sqrt((1+ sqr(cos)/(4*sqr(cos). If angle is 51.51.51, then the multiplier comes to 0.9516.
- 51.51.51 = 51 + (51÷60) + (51÷3600)
- On calculator... √((1+(cos(51.8641666667)^(2)))÷(4
×(cos(51.8641666667)^(2))) = 0.9516205676
hi..did u able to get the angle of 51.51.51?when i i measure the angle is about 59 degree..do you know why is that so?
The angle should be 51°52'20"
@@cenation319 the pyramid may still work. But for accurate angles, did you take measurements correctly? You can cross verify the measurements.
I have no device to check the angles. Just used trigonometry to get the length of the sides.
@@pankajswarnakar9137 this number doesn't look right.
@@ashwini_adhyatm my mistake..the angle are correct..Was measuring it wrongly..thanks for your reply.
If the paper is a parallelogram,,this method is not correct
19.04cm means less than 19.10cm know
But its not a 50 degree
True
Beautiful
U are unable to tell measurement properly in English. 😅
Hi Hello hi
Thank you Master..very clear demonstration🙏
@@savithris.vinayak8619 hello friend
Thank you
Thanks
Thank you
Thanks
Thank you
Thanks
Thanks
Thanks
Thanks
Thank you