Tacoma Trifold Tonneau Cover removing and installing

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 49

  • @Intrepidesign
    @Intrepidesign 6 місяців тому

    the soft focus and muted audio are really what make this video great!

  • @WiseSilverWolf
    @WiseSilverWolf 3 роки тому +6

    Do the bed rail caps break if you pop them off? or can they be reused?

  • @Mr_Lasagna
    @Mr_Lasagna 5 років тому +13

    Man using that drill cringes me, y’all would not be doing that on my truck huh, but good tutorial

  • @thorsmith9545
    @thorsmith9545 5 років тому

    Great video! I'm getting mine installed tomorrow morning at the dealer on a 19 Pro.

    • @erice8502
      @erice8502 4 роки тому

      EasyMoney 74 where did you find the cover - and did Toyota provide the rails?

    • @oswuarlopez6984
      @oswuarlopez6984 4 роки тому

      How much ??? $$$

  • @EKyger2
    @EKyger2 4 роки тому +1

    Great video, super useful. Just need to show how to insert the rubbers on the front and youd be perfect.

  • @USMC_LAterZ
    @USMC_LAterZ Рік тому +1

    Can you please provide the parts number for the bed rail caps? Right and left side?

  • @jorgeruiz8853
    @jorgeruiz8853 4 роки тому +2

    my truck doesnt have any of the pins or hardware where can i get them?

  • @matthewmiller6021
    @matthewmiller6021 4 роки тому +1

    Are the bed rails universal from truck to truck? I ask because I'm trying to sell my cover, and a guy asked if I'd be willing to swap bed rails. It looked like, on the video, that each truck kept their set of bed rails. Thanks for the help.

  • @ahkeen
    @ahkeen 4 роки тому +4

    Anyone got part numbers for those plastic and rubber mounts?

  • @matthewcurtis4261
    @matthewcurtis4261 6 років тому +4

    Maybe a quick video on the torment of the rubber front plugs? I have the LH and RH plugs but shape is goofy and not sure on the figment/ Install.. thanks!!

  • @cjsmith
    @cjsmith 7 років тому

    Thanks for this video. I'm getting ready to remove mine to add a Snugtop XB Sport Shell.

  • @sphynx0923
    @sphynx0923 3 роки тому

    How did you install the rubber plugs???

  • @nitehwk182
    @nitehwk182 6 років тому +2

    how do you install the rubber seals?

  • @HeartsInBalance-t8o
    @HeartsInBalance-t8o 11 місяців тому

    if you can show how the tri-fold was put together in the 1st place that would be most helpful

  • @santanero9938
    @santanero9938 7 років тому

    I have a 2017 Toyota Tacoma and I got a tunnel cover from another Toyota Tacoma same year I don't have the accessories and it does not fit on my Toyota Tacoma bed one side is a little out what do you recommend I do and what accessories should I buy

  • @mhcoolm
    @mhcoolm 2 роки тому

    How do you remove the pins ???

  • @christophertorres4190
    @christophertorres4190 7 років тому +1

    how do you install the rubber seals!!!!

  • @5JSG
    @5JSG 7 років тому +4

    Can u show how those rubber seals install? You guys cut that part out lol. Great video btw

    • @alvindo7
      @alvindo7 6 років тому

      5JSG where can I buy a rubber seal?

  • @SwankyDetailer
    @SwankyDetailer 4 роки тому

    What size is that star tool?

  • @jasonmccabe6945
    @jasonmccabe6945 7 років тому

    Is there a way to tighten the rear of the cover? While it's closed and the tailgates up I can still pull the back up almost an inch? When I bought it the dealer said they can't be changed or fixed because it comes from the factory that way.

    • @wymore73
      @wymore73 7 років тому

      The dealer told me the same thing, he said there's no adjustment.

    • @shinhochulp
      @shinhochulp 6 років тому +3

      Put your hand about 6 inches from the end of the cover, on the side edge (basically where the pins and latch are), and press down firmly. You should hear a click which should snug down the cover. Do it on both sides, if needed.

    • @skyrunr
      @skyrunr 4 роки тому

      @@shinhochulp I have the same problem on my 2020. From what I can tell the pins in the factory holes are too high. There's no adjustment on the latch as there should be. So I'm going to make the wholes on the bed widened and move the pins down. They designed it to be a quick and dirty port installation IMO.

  • @ChadC
    @ChadC 5 років тому +1

    Do you have a part number for the rubber plugs that need to be installed at the front of the bed?

    • @ChadC
      @ChadC 5 років тому +2

      Nevermind, I found them. 62541-04010 and 62542-04010

  • @misskriss79
    @misskriss79 7 років тому

    What size torx do you use to remove bolt?

  • @glenaikman6533
    @glenaikman6533 6 років тому

    I would like to purchase Tacoma OEM Tonneau cover, What is the part number?

    • @mechanicsvilletoyota520
      @mechanicsvilletoyota520  6 років тому +2

      Glen, our parts department will be able to assist you through the whole process of purchasing an OEM Tonneau cover for your Tacoma. The direct number for our parts department is 804-559-8717. We can ship it to you anywhere in the US. Thanks, have a great day!Mechanicsville Toyota

    • @jessicastallworth2403
      @jessicastallworth2403 3 роки тому

      Were you able to find all the hardware ??

  • @mattthomas4570
    @mattthomas4570 6 років тому

    What size is that bolt head is there such a thing as 11.5MM or did it come with a special socket? 11mm is too small and 12mm feels like it is going to strip the head.

    • @ChadC
      @ChadC 5 років тому

      It should be 12mm. I believe that this is the part number "64935-04010".

  • @cosmefulanito408
    @cosmefulanito408 5 років тому

    where I can buy the cover?

    • @hostilityy
      @hostilityy 5 років тому

      you'll have to search online. walking in to dealerships parts department to buy these is like buying a TRD pro grill for a regular tacoma. they say nope. they say these tonneau have to be bought thru the car sales department. toyota puts these things on specific trims and packages from factory etc and NOT all tacomas are eligible ( even if it all fits anyways). very weird.

  • @henryhernandez3276
    @henryhernandez3276 6 років тому

    How i can contact with you?

  • @Drunkxninja
    @Drunkxninja Рік тому

    What the fuck was used to record the video ?

  • @notoffroading
    @notoffroading 4 роки тому +1

    That drill is trash 😂

    • @craig9069
      @craig9069 3 роки тому +1

      It's not the drill my friend!

  • @EverworthPereira
    @EverworthPereira Рік тому

    Hi i have a tacoma trifold tonneau covers don't have the pins any ideas how to source some?

  • @wymore73
    @wymore73 7 років тому +1

    Are the bed rails universal from truck to truck? I ask because I'm trying to sell my cover, and a guy asked if I'd be willing to swap bed rails. It looked like, on the video, that each truck kept their set of bed rails. Thanks for the help.

    • @matthewmiller6021
      @matthewmiller6021 4 роки тому +1

      Did you ever get an answer to this question. I am wondering the same thing.

    • @alexs825
      @alexs825 3 роки тому

      They swapped. The factory tonneau has cut bed rails to go around the clip locations (metal knobs or whatever they’re called) there’s a post on Tacoma world on this

    • @alexs825
      @alexs825 3 роки тому

      I had mine from the factory trying to figure a way to seal the bed but it is awful. There’s a 1” gap in the rear of the bed and water seeps in all along the bed rails. Every solution I’ve seen doesn’t fully address the problem. Still debating what to do