Making a Benchtop Jointer More Better
Вставка
- Опубліковано 26 сер 2024
- In this video I add a base and infeed and outfeed extension tables to my new Jet JJ-6HHBT 6-inch helical head benchtop jointer. Hopefully some of the things I showed in this video gives you inspiration to tackle something like this yourself.
Jet Benchtop Jointer - amzn.to/3WatNGg
1-2-3 Blocks - lddy.no/1e4m8
Straightedge - lddy.no/oa1g
PATREON: / inspirewoodcraft
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoo...
INSTAGRAM: / inspirewoodcraft
Looking for DOUBLE SIDED PAPER TAPE, DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstor...
BANGGOOD WOODWORKING TOOLS: www.banggood.c...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com...
SOME OTHER VIDEOS YOU MIGHT BE INTERESTED IN:
HOW TO MAKE THIN STRIPS ON THE TABLE SAW - • Throw Out Your Thin-Ri...
CHECK OUT MY TAPER SLED VIDEO HERE - • Unlimited Possibilitie...
HOW TO MAKE A MITERED HALF LAP PICTURE FRAME - • How to Make a Mitered ...
VISIT THE INSPIRE WOODCRAFT SHOP: inspirewoodcra...
Adjustable Box Joint Jig Plan: inspirewoodcra...
Multipurpose Shooting Board Plan: inspirewoodcra...
All Purpose Tapering Jig Plan: inspirewoodcra...
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s UA-cam channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful.
Fantastic work and well done. This is what You Tube woodshop channels should be more about instead of un-boxing their new $10,000 tools. Great ingenuity.
Hey some of us are very interested in those 10k tool unboxings lol. It's the 5 tools you didn't know you need videos that have gotten old 😂
I did something similar to my old Delta 6" benchtop years ago that I found in ShopNotes. I used 1/8" aluminum angle stock for the braces and it has worked out well. I'd love a much larger jointer, but don't have room in the shop. I can attach the wings in a couple of minutes when I need to joint longer than around 3 ft and everything stores away when not in use. Keep sending inspirations Jodi. - Chris
Easy ... should just ... will automatically ... ah, how many times have we all heard those words in our heads ... thanks for making me smile :)
Oh and informative video to boot 👍
Really nice work. To eliminate the flex at the end of the extended outfeed, you could add a brace from the underneath towards the end of the outfeed back to the top edge of the stand. If you don't want it to be clunky, this could be a metal rod - and with that you could make it threaded rod and adjustable as to length, also.
Love to see what you have come up with. So many times I have taken your ideas/genius and modified it for my needs. Thanks for sharing and please keep doing what you do. Hope the new year is treating you well.
Nice upgrade, great idea. And plenty of patience to get all that lined up. Great job, man. Thanks for sharing.
Best how to I have seen in a long time. Thanks!
Wow!! Nice add on. Never even considered this, but now you got me thinking.
Good stuff. I want to start doing woodworking but there are so many things in life that hold me up. I am still working on my 1980 Camaro since last year that has been sitting for 19 years. Hope to have it done by spring and start off with my wood lathe. Having gathering a lot of wood to turn lately. Love the videos and thank you.
That’s fantastic ingenuity. Well done.
Great idea, thanks for posting a video of your build!
Great stand. Would you do a video on why you picked this particular jointer. I like Jet, I have an 1840 lathe. but a $1000 for this seems a little steep. I like the helical head and the cast iron fence but still. I look forward to watching your videos. You take a different approach to woodworking which is becoming rare these days. Thanks and Stay Safe.
Nice job on the stand and extensions Jodee!
I had no idea jet made a small jointer like that. Pricey, but it looks to fill a niche of a quality machine in a small shop.
I know I've said it before, but that design you used is my favorite for shop furniture. Quick and simple to build, very sturdy.
Nice problem solving for the upgrade to the Jet.
I was literally looking up videos for this exact modification a couple weeks ago to see if it would even be worth getting a bench top jointer or if I would need to suck it up and go for a floor size model. Thanks for the great content!
You're becoming my favorite YT wood worker. This was a great video on how to get the most out of a bench top unit when not many of us have the $$$ or get high end equipment from a channel sponsor. Keep it up. Ever consider and lathe work?
Smart. Innovative. True DIY. 👌
Watching your hands get as close to the table saw blade as you were had me holding my breath. I got the ends of two fingers mangled last year, so now I am very cautious.
I've learned a great deal from your videos. Thank you.
We'd all like a bigger jointer, as the one we own is never large enough. ;) This is a nice idea and I may try to build these for my vintage late 60s Rockwell 4".
Yah, 4"... it was free, in great shape and came from my dad. Built like a tank, like most vintage power tools. I made a mobile stand with some on-sale shop stand parts (from Rockler), two laminated 3/4" plywood top pieces and compartments below... one open for the motor, one enclosed to catch the chips for hookup to my dust separator.
Very nice upgrade. Looks like it will provide excellent service.
Nice! Two suggestions: Put a brace from about the middle of the infeed and outfeed extensions back to the stand, that might reduce the flex, assuming the clamps that hold the jointer to the stand are stiff enough. Second, replace those 3/8" bolts with some black 3/8" flanged button head screws to make it look really clean :) Something like a McMaster-Carr p/n 91355A193, assuming 2" is long enough.
I'm not going to be able to look at my bench-top jointer the same now knowing that I definitely have to do this to mine.
Might I suggest.... Increasing the height of your extension side pieces to make a larger truss will greatly reduce defection in the top. The face surface area of the side trusses that butts up against the jointers housing will then increase rigidity and eliminate bending moment and deflection topside.
I think that's a pretty good improvement ... I wouldn't worry about a tiny bit of flex. The extensions really just help you manage longer boards. As long as you keep the greatest pressure on the cast iron, the extensions shouldn't really affect anything as long as they're straight, coplanar and flush. Still wouldn't trade you for my 8in jointer though. lol
I took the hard road and mill the table edges to 90 degree ....
I'd love to make this. Can you list the measurements of the plywood pieces? That would be really helpful! Thank you!
Great idea and a polished look. Since you're not supposed to put too much pressure on the outfeed, I'd say a little flex isn't that big of a deal. Maybe the infeed can be stiffened up a little and you'd be good to go.
Can you do a review on your jointer? I'm seriously thinking of buying that very one that you have. I would like to know the pros and cons bench top jointers only. Like you, it is not in the cards at this moment to purchase my dream jointer.
Excellent. I wish they would just sell us something like this as an attachment
Nice
Really well done work, dude! 😃
I think about making something with drawers for mine... But it's definitely a bulletproof design!
Stay safe there with your family! 🖖😊
Good said by you
Going to ditto the other comment asking for an update on how this is holding up after 8 months of use.
So long as you bear down on the cast iron part, the in/out feed flexing should be manageable. As they say, don't let perfection be the enemy of good.
thanks
Nice I have the 8 inch wahula jointer it has the extension bars. But D*** are they hard to get level with table. Good idea like to see channels show solutions most of us common woodworker face yes floor model one day but I want a bandsaw first. Thanks
I watched your Jet jointer. I want to do your Infeed and out feed addition. I never hesate to ask. Do you have a cut list for your project? Right now I have trouble thinking. No I am not cutting corners. I got run over by a drunk driver when I was in my wheelchair. Yes I got hurt. So if you have any additional intel it sure would help me out. I can do it and will do it but I have learned to ask. You did a great job. Thank You for your help. Enjoy your day! Thom Schuck, Portland Oregon. Thank You!
Can you offer an update on this upgrade? I'm very interested in doing this for my poor cable six inch jointer
Good video!!
Very cool. Why not add a diagonal support from the cabinet bottom to prop the extensions. I would imagine there would not be any flex possible?
How are you liking the Jet benchtop jointer? I am looking for a small jointer due to workshop size constraints. Keep up the excellent videos!
Nicely done. Way to turn a small jointer into a not so small jointer.
How is the modification holding up a year later?
Would it have been just as possible to cut those table saw rabbets(I think those were rabbets?) on the jointer itself? Just moving jointer fence inward to meet the same cut width as what you did on the table saw, and taking a series jointer passes until you reach your depth of cut
I will say that short clip of you doing the table saw cut made me very anxious for your digits.
All in all though, great idea! I definitely will think about trying this out on my 6" wen jointer
Please someone tell me how the outfeed table can be adjusted.
That should work just fine, even if the end of the outfeed has some flex it shouldnt matter because you shouldnt be pushing in that area anyway. If youre jointing a 12' long board, maybe it would matter a bit.
Just bought this same jointer a couple weeks back, and would be interested to know how your tables are holding up after a couple months. Want to try the same, but nervous about drilling into the existing tables if it turns out to be a bad idea. Any updates?
Source of the plywood for the in/out feed tables? Have not seen them instore
Good Day… I sent you a comment earlier about your Jet 6” jointer bed extension project. I now have bought one and I am making slow progress on doing my in/out feed tables. Time wise it’s everything X 2. The screws that you used? Do you offhand know or remember the name of those screws? I believe I have some but I cant find them. When I go into Ace/HD/ Lowes trying to describe them… I leave everyone frustrated and I leave empty handed. I believe this is what my deck guys used on my Ipe deck. Just looking for a bit of help if you have time. Thanks for your outstanding videos. Thom Schuck / Portland Oregon
@Timber2Toothpicks It might be these screws that you are talking about. (spax.us/products/t-star-plus-trim-head-mdf-hardwood) These are the ones that I used to join the wing braces to the wing tables. Hopefully that's what you were after. I think I got them at Lowe's.
There’s nothing wrong with making things more better, is watt I say.😂
What is the brand of those push paddles you're using at 6:06?
Much better not more better
1:38 why is your hand so close to the blade?!?
6:15
Damn, this is pimpy.
I have the same unit. One day after some unusual loud noise, I realized the cutter heads are no longer level with the out feed table. The out feed table is not adjustable and the cutter head is not adjustable as well. Checked inside, the bolts are tight, belts good tension. I don't recommend this unit.
"true helical" ? Are there non-true ones?
i'm just surprised they would sell a helical head in a bench top
more accurately, it's a segmented cutterhead. sure if you traced a line through the center of each mountin point it would form a helix, but i do find that calling these helical heads is dishonest
Where did you go to school??? "Anyways" is not a word and you can not make something "more better"!!! All in all a nice video and a good addition to the bench unit...
1:36 I thought you were about to lose some flesh and bone
I have been wondering the people who make a chop saw station.
Why not make it modular?
A way to drop any too you may need with longer in and out feed.
I know it might take longer for set ups
But if (like most of us with tiny garage shops) it could help make a space more useful.
Using this lifting table to adjust for the tool being used
ua-cam.com/video/ohyMRATOt5U/v-deo.htmlsi=J1BvlKHV26ocFF5d
Just because you have a sawstop doesnt mean everyone does watch those fingers it hurts real bad
Nice job. Seriously, though. It’s a Jet. You shouldn’t have to. In my mind, a jointer without extensions is borderline useless. What up, Jet? If my DeWalt planer came without I’d be toast.
I cannot watch this technique of working with table saw. My stomach gets hurt
First!
"more better".... Lol.
The English language was the real loser here.
'More better'??!! - jeez man, it's 'betterer'..
What language has 'more better'? The rest of the title looks like English but...
Grammar not required.
Now look, you won’t like this however you have helped me so ……………
Your video title: no need to use better on the end it’s poor English or more precisely grammar and so many many people see it!!
Not trying to be a smartarse……..honestly
Bob
England
Looks like a waste of time and materials.
Don’t quit your day job.
Great stuff, great work! I have a 6" with fairly long infeed and outfeed tables, but it's the 3-knife cutter head. This is an excellent modification to add another option when looking to upgrade to a helical head or getting an affordable jointer in the shop and definitely "making it more better". My 6" takes two people to move it anything more than one foot. Great video.