Ok bang,betul ada vidionya utk 3 pcs transistor,semoga ilmu Abang bermanfaat bagi org banyak atas kebaikan Abang berbagi ilmu semoga Allah SWT. limpahkan rejeki dipanjangkan umur dan sehat walafiat🙏🏻🙏🏻🙏🏻
You can add up to 45 LED lights on this circuit without change the components. But if you want more than 45 LED lights, that will need 3 channels current booster circuit.
Kurangi jumlah LED di setiap jalurnya, bisa juga gunakan lampu LED yang nyalanya lebih terang, karena pada kenyataannya setiap pabrikan LED memiliki kualitas berbeda-beda.
Pakai BC547 bisa, tapi perhatikan posisi pin EBC, karena BC547 ada yang EBC dan ada yang CBE, terus R 560 ohm tdk bisa di ganti 1k kalau menggunakan lebih dari 6 LED.
tegangan elco hanya sebagai penyesuai dgn tegangan kerja, tapi yang menentukan cepat-lambatnya gerakan running LED yaitu kapasitasnya (Farad), semakin tinggi nilainya akan semakin lambat, kalau 2200uF hasilnya akan sangat lambat, mungkin itu akan cocok sebagai traffic light atau lampu lalu lintas.
Hello my friend. your projects are beautiful. congratulate you. I ask you to shoot a project video with knight rider effect, 6 or 8 leds and 3.7v or 4.5v.
Bang,mau tanya kalo led nya smpe 800 biji bahkan smpe seribu biji dgan transistors 3 biji Apakah aman aman aja dan d supply 5voIt atau charger Hp mohon penjelasaan nya bang soaI nya Mau bikin running texs nama
He probado 45 LED y los resultados son buenos, tal vez todavía se puedan hacer 60, pero debe ser con la misma calidad de LED para que la intensidad de la luz sea la misma.
you can use any resistors mode but must be more than 1/2 watt for 560 ohm (the more led bulbs, the more R power/watt) You can use any NPN transistor but pay attention into EBC pins position How many LEDs that can be use,, you have to try it by ur self
Kang, pengen belajar nih... Ini sumber inputnya brp volt ya kang, kalau pake lampunya lebih banyak lagi gmn, kalau pakai bateri jam gt bs tdk? Sy akan trus support dr sini, salam dari kediri jatim Trus berkarya kang...
Hello Good evening SIR .apni bolchen 45 pcs led diye chesta korechen .tahole eije circuit eta diye ki 45 pcs led running chaser toiri kora jabe ki .please ektu bolben
@@moristo thank you for your replay and i have an another doubt. Can i use different colours led's & how many led can used in this circuit for a 9v battery.
Sebenarnya orang-orang yang butuh skema mereka tahu/bisa menggambar skemanya sendiri, mereka tergolong orang yang sudah ahli. Kalau pemula mereka butuh tutorial seperti video ini. Jadi kalau kamu ahli dan benar-benar butuh skemanya, silahkan menggambar sendiri.
on my another vid are ready with speed controller, and you will see my video that how to make running led chaser without IC and without Transistor on Christmas tree.
Ok bang,betul ada vidionya utk 3 pcs transistor,semoga ilmu Abang bermanfaat bagi org banyak atas kebaikan Abang berbagi ilmu semoga Allah SWT. limpahkan rejeki dipanjangkan umur dan sehat walafiat🙏🏻🙏🏻🙏🏻
Amiiin.. sama-sama mas ya.
Amin amin ya rabbal allamin
Terima kasih.
Selain transistor seri 9013 jenis yan lain bisa gk mas asalkan npn
Kode lain boleh asalkan NPN, tetapi posisi pin-pin EBC harus di sesuaikan.
Thank you bro.. I m a teacher and I will use this for my material lesson to the students.
Good job, semoga selalu sukses ya.
100 uf 25 volt capacitor can use
@apexutkarsh1917 Just try.
Nicely explained and demonstrated. its ring oscillator .
and background music is also good.
Okay, thank you.
Bhot khash video sir mera jo project hai o 35 ya 40 led ka hai to o kyese bnega car ke liye jo long time chale btaye sir
maine 45 led ke sath prayas kiya hai, aur yah abhe bhe acha hai
Thank you sir, maine ye bana liya hai lekin osaka circuit jara chota nahi ho sakata kya?
Angreje ka upayog karana behatar hai taki main apake prashn ko behatar dhang se samajh sakon.
Very nice video bhai ji
have you try making it friend?
I want to increase the capacity of the circuit to use more bulbs, and what should I change in the circuit. Please help me. Thank you in advance.
You can add up to 45 LED lights on this circuit without change the components.
But if you want more than 45 LED lights, that will need 3 channels current booster circuit.
Bang pake tr c1815, resistor 1k1/2watt, 10k1/2watt, elco25v100uf kalau dikasih led lebih dari 20, input 12v bisa engga?
Mas bro untuk memastikan hal itu harus di lakukan uji coba, dan perlu di perhatikan transistor C1815 original posisi pinnya adalah ECB.
Bang cara atasi lampu led redup gimana bang, udah saya coba tapi redup
Kurangi jumlah LED di setiap jalurnya, bisa juga gunakan lampu LED yang nyalanya lebih terang, karena pada kenyataannya setiap pabrikan LED memiliki kualitas berbeda-beda.
Can I add 1 more Transistors, thank you!
If you add one more Transistor it will looks like two transistor (Flip-flop) with more than 2 LEDs.
Can we use same components for 15 or 18pc leds?
Sure, coz I already test with 45 pcs LED.
Buen trabajo.Muchas gracias.
De nada, buena suerte siempre.
Sir maximum kintne led hum is circuit pe use kar sakte hai?
mainne 45 kee koshish kee hai, yah abhee bhee achchha hai, agar aap aseemit vaale chaahate hain, to krpaya mere any veediyo dekhen.
Good question
Good reply :)
pwede ko bang gamitin yung 1,1k resistor sa halip na 560 ohms para sa 24 volt supply
Yes 1k more than 1 watt.
Me sirven transistores 2n 3906, 3904, Bc547 algún otro?
Solamente NPN Transistores, y hay que ajustar la posición de las patas del EBC.
Sir can I use bc547 transistor and how many led connect
You can use all TUN (Transistor Universal NPN), but you have pay attention to the EBC pin positions.
Bagus pisan, saya mau coba, ............. Thank u.
terima kasih atas dukungannya,, semoga selalu sukses.
I like this circuit very good ok
you have to try to make it friend
Kya hum 3 transistor ke badle 4,5 ya 6 use kar sakte hai
aap ise aajama sakate hain
Mantap
I want to connect more than 10 more LEDs to this circuit, can this circuit withstand it?
I already test with 45 LEDs still looks pretty good without change anything.
Ami ei circuit diye highest koyta led jalate parbo please ektu bolben .r 220 volt ac diye ami jalate chai tar jonno ki korte hobe please ektu bolben.
Daẏā karē āmāra bhiḍi'ōṭi dēkhuna"No IC 2 modes running light chaser directly 220 VAC".
More led bulbs, the full capacity of the Transistors, friend
The Resistor 560 ohm that loaded by LEDs in this circuit, not the Transistors.
Sir kitne led laga sakte hai
42led laga sakte hai
Maine ise 45 LED ke sath azmaya hai, aur yah abhe bhe acha hai.
Kalo pake elco 4,7uf 50v bisa gak mas
Kecepatan gerakan rambatan cahayanya terlalu cepat nantinya.
SIR eisa chasers main 1 pich red 1 pich green 1 pich blue led laganeke bad cholega please bataye thoda
usake lie aapako kuchh bhee badalane kee jaroorat nahin hai.
powernya bisa pake batre 9v ga kak
Silahkan dicoba aja.
How many bulbs are possible to add
I have try 45 led bulbs with pretty good result without change anything.
Can we adjust the speed of blinking
In my another video with speed controller.
mas klo pke transistor bc547 bisa ?
sama resistor 560 di ganti sama yg 1k ohm bisa gx? 🙏🙏
Pakai BC547 bisa, tapi perhatikan posisi pin EBC, karena BC547 ada yang EBC dan ada yang CBE, terus R 560 ohm tdk bisa di ganti 1k kalau menggunakan lebih dari 6 LED.
transistor udh bnr, tpi klo pakai elco yg 16 tpi 2200uf gmn tuh?
tegangan elco hanya sebagai penyesuai dgn tegangan kerja, tapi yang menentukan cepat-lambatnya gerakan running LED yaitu kapasitasnya (Farad), semakin tinggi nilainya akan semakin lambat, kalau 2200uF hasilnya akan sangat lambat, mungkin itu akan cocok sebagai traffic light atau lampu lalu lintas.
@@moristo
in 15 led =10k ohm & 560ohms with bc547 plz tell me sr
@@vs8786 I already test with total 45 LED lights using 1/4 watt for 10k and 1 watt for 560 ohm.
Super👌
Thanks friend.
Without resistor work karega kya
Yadi Resistor shabd ko kise any shabd se badal diya jae.
@@moristo matlab
Yadi "Resitor" ka nam badalakar "Butassik liu" kar diya jae, to yah kaha ja sakata hai ki yah sarkit bina Resistor ke kaam karata hai.
7 color changing led circuit bna skte ho kya
Use microcontroller.
10k or560 ohms कितने whatt
Ki leni hai
For 10k at least 1/8 watt, for 560 ohm at least 1/2 watt.
How many LED we connect in single row plz reply it's urgent please
If urgent you can try add LED one by one.
Ok
Thanks
Yaw.
Sir yea 10k resistor kitne watt ki hai or yea 560 ki resistor kitne Watt ki hai
Resistor 10k kam se kam 1/4 watt, resistor 560 kam se kam 1 watt.
@@moristo Thank u😊😊😊😊😊
you are welcome
Kya him isme 100 led lgaa skte h sir
this circuit I already test with 45 LED bulbs, please see my another vid for unlimited LED bulbs
Nice, is it possible for 50 led in series using 50 transistors, resistor and capacitor? Thank you
You have to try it.. that's will be 50 channel..
@@moristo Thank you for replying me
yaw
Super sar
thank you friend, I hope this led chaser circuit useful for you.
I need 30 led for one channel. What do I need to change this circuit for led 30
You will need additional transistors to increase the current.
@@moristo i do not know much about this electronics. Which resistor in the circuit do i want to remove and what kind of resistor do include?
Hard to explain on community chat like this, so I will make the video for the futures.
Bang kalo lednya di tambah jadi 100pcs bisa gk bang
Waktu lalu saya hanya tes 45 LED karena waktu itu saya hanya punya 45 dan hasilnya masih oke tanpa mengubah komponen lainnya.
Ok makasih infonya bang semangat ya buat kontenya
Sama-sama, sukses selalu ya!
What is the volt of battery used here?
More than 9 volt.
thank you
You are welcome.
Will it work to rgb lights?
RGB stands for Red Green Blue, so it's about LED colours.
There are many types of RGB LED, so please more specific.
@Moristo Lekka Electronic yes the three color led
Please tell me the LED type/code, or physical characteristics that describe it more.
Hello my friend.
your projects are beautiful.
congratulate you.
I ask you to shoot a project video with knight rider effect, 6 or 8 leds and 3.7v or 4.5v.
thank you, I hope some day I will do it.
Sir ei running led chaser blue green or red diye baniye dekhan r diagram ta please ektu dekha ben .
It's okay, koee dikkat nahin hai, provided that all LEDs quality is the same.
What should I do if I want to run the circuit with ac supply
How many volts is the AC voltage that you will supplied?
@@moristo ac 220 volt
Jo normally aate hai humare ghar me
So that you have to do purchasing AC 220v to DC 12v adapter.
@@moristo no I want to make it
Can you do it?
Sure, I can do it.
Maaf pemula...
Bisa pake batre kotak 9v ga rangkaian itu
Bisa tapi nyalanya kurang terang dikit.
friend. you don't make a circuit for aircraft navigation lights for model aircraft
In the futures I will show how to wirelessly control a few channels of servo with a basic system.
@@moristo ...ok...thanks
YAW
pwede bang gumamit ng 24v sa circuit na yan kesa 12v
gamitin ang dc to dc step down 24v to 12v
Muito bom 😃😃
Obrigado pelo seu apreco.
berapa volt arus nya om?pingin nyoba lagi..😊😊😊
Silahkan disimak aja, ada dalam video, semoga bermanfaat video saya ini.
is it okay for 12v power supply?
You have try make it then test with 12v.
the only thing missing was the parts list with data so we can go ahead and gather the parts
Component data already exists in each component part scene.
So you need to watch carefully and use play/pause button.
Có thể làm tối đa bao nhiêu led ạ
Tôi đã thử 45 đèn LED và kết quả vẫn tốt như vậy
@@moristo nếu thêm led cứ nắp nối tiếp thêm có phải chỉnh sửa gì k ạ
bạn có thể thêm nó trực tiếp giống như đèn LED được cài đặt sẵn.
can I use s9013 transistor for this?
You can use all NPN transistor, but please pay attention to the EBC pin positions.
@@moristo what will happen if I got it wrong??
Of course if you get it wrong you will fail on it.
S8050, 13001 use ho sakta he kay
You can use any NPN transistors,,, but You have to pay attention into EBC pins position
thanks
yaw
klw pkai transistor 547 /1815 bisa gak om..?
Posisi kaki-kakinya akan berbeda, posisi kaki secara original sebagai berikut:
- C9013 (EBC)
- BC547 (CBE)
- C1815 (ECB)
@@moristo
berarti bisa ya om.cuma saya punya yg 2 itu sj yg bnyak...resistor yg di pakai buat 547/1815 berapa sj om?
Yang lainnya sama, kalau pakai LED lebih dari 15 pcs maka resistor yang 560 ohm harus yang minimal 1 watt.
@@moristo
oke,mkasih ya om..👍👍👍
Sama-sama om.
Kitni led ke liye ban sakta he..
Maine 45 ke saath prayas kiya hai, aur yah achha hai..
Thank u for reply..
You are welcome man.
Maksimal berapa led bang, mau buat sekalian panjang soalnya
Saya sudah tes 45 LED masih oke.
Bang,mau tanya kalo led nya smpe 800 biji bahkan smpe seribu biji dgan transistors 3 biji Apakah aman aman aja dan d supply 5voIt atau charger Hp mohon penjelasaan nya bang soaI nya Mau bikin running texs nama
@@oyonkrahmat992 Semua itu tergantung dari Watt Ampere setiap komponen yang digunakan.
Kalau led nya ditambah banyak lagi apa bisa bosku
yg ini sy sdh tes lalu dgn 45 led tetap bisa... kalau mau yg unlimited led-nya silahkan liat vid saya yang lain.
Om #@@moristo emg org baik kq,,pinter tp tdk sombong,mau berbagi pengetahuan 👍👍👍
thanks
Cuantos led puedo conectar con ese circuito a 12 voltios
He probado 45 LED y los resultados son buenos, tal vez todavía se puedan hacer 60, pero debe ser con la misma calidad de LED para que la intensidad de la luz sea la misma.
Can use 1W metal film resistors both 560 ohms and 10k ohms?
And can also use BC337/BC327 NpN transistor TO-92 triode transistor?
And how many led light can put every channel?
you can use any resistors mode but must be more than 1/2 watt for 560 ohm (the more led bulbs, the more R power/watt)
You can use any NPN transistor but pay attention into EBC pins position
How many LEDs that can be use,, you have to try it by ur self
@@moristosir can you give me 220 volt circuit diagram of this project.
And please mention 5mm led 50 pcs I given circuit diagram.
@@injamul1992 I already test with 45 LEDs on yhis circuit without change any component value, for 220 volt you can see that in my another video.
12 v bike battery use yes or no
Just like in the video, 12 volt DC.
Nice Trick
have you tried making it?
How many leds can connect through this circuit
Plzz give reply
I have test 45 LEDs without change anything, still pretty good result.
@@moristo ok
Thanks.
good evening sir, excuse me, but I don't get the transistor npn c9013. What other can I use?
you can use any NPN transistors [bjt] but you have pay attention to the EBC pins position
Thanks for your kind reply. But what would be the correct connection?
If you use BC547 transistor, the pin position is CBE.
Lichu light ko running Karne kelie kese machine prepair karenge iske uper ek video banaeie plz .macximum 25 lichu running kelie machine chahiee
krpaya mera doorsara veediyo dekhen.
Kang, pengen belajar nih...
Ini sumber inputnya brp volt ya kang, kalau pake lampunya lebih banyak lagi gmn, kalau pakai bateri jam gt bs tdk? Sy akan trus support dr sini, salam dari kediri jatim Trus berkarya kang...
terima kasih supportnya,, semua jawaban sdh ada dlm video, mohon disimak baik-baik
Nice
thank you, I hope this video useful for you.
Thanks
you are welcome friend
Questions, what is the power source and where to connect the 12v DC?
Your question was answered in video, You just need to watch completely.
Bro this device work in 9v ?
yes
Udaya🔋🔋💡💡👍👍🙋🙋
thanks
Udaya🎂🎂🎂🌹🌹🌹
@@UdayaRai-mo4ur please say something
🎂🎂🎂🌹🌹🌹
ok
V V N VIDEO PAR VIDIO FAST THI IIS LIYE KUSH SAMJ NAHI AYA SLO VIDIO BANA KAR BATAO JI SLO VIDIO HOGI TO BILKUL SAMJ AYE GI JI
THANKS JI 🙏
aap seting batan mein veediyo plebaik gati (0.5) set kar sakate hain.
3.7v DC chaser with bc547 plz explain
OMG, it's hard for me to explain you by typing here.
Hello SIR ei running led chaser mereko 50 pcs dene thora kordo
Ami 45 LED cesta karechi, ota bhalo.
Hello Good evening SIR .apni bolchen 45 pcs led diye chesta korechen .tahole eije circuit eta diye ki 45 pcs led running chaser toiri kora jabe ki .please ektu bolben
Ami 45 LED era janya kichui paribartana karini, tabe 560 ohama pratirodhakera 0.5 besi oyata ba byabahara kara ucita.
SIR 1ta kotha description box bolte ekhane kon option bojhay ektu bolben .ami eta janina
Eta ki?
Which resistors can used for 9v dc in this same circuit
With the same resistors value.
@@moristo thank you for your replay and i have an another doubt. Can i use different colours led's & how many led can used in this circuit for a 9v battery.
LED colors is just about favorite, in this circuit I already test with 45 bulbs of 3volt 5mm LED.
Please make 5 volt to 12 volt 1 amp booster made
Okay, but I don't want promise you when it become real.
Sir ap jaldhi se kare hamare school ka students weit karra hehe
apako 12 volt 1 empeeyar aautaput ka utpaadan karane ke lie inaput ke roop mein 5 volt 3 empeeyar chaahie.
Wether same circuit work in 9v battery?!
sam circuit for 9 volt.
amazing...
Thank You friend.
Can I use a 9V DC source instead of a 12V DC source?
yes you can use 9 volt DC.
@@moristo Thank you for the quick reply!
YAW
Very nice to explain. I like it👍.
Thank you.
50 LED 12V dc pr bhi work krega kiya ????
You have to try it
Apne 547 pnp hai kya
BC547 transistar NPN hai.
Led kitni use Kar sakte he
krpaya ise svayan aajamaen.
pagka 3 * 3 gagamitin kong kulay ng leds ay “blue” “green” “red” kase sakto tatlo!
Kulay nababagay bawat panlasa.
super thanks for idea
you are welcome sir.
Sekema nja atuh bos
Sebenarnya orang-orang yang butuh skema mereka tahu/bisa menggambar skemanya sendiri, mereka tergolong orang yang sudah ahli.
Kalau pemula mereka butuh tutorial seperti video ini.
Jadi kalau kamu ahli dan benar-benar butuh skemanya, silahkan menggambar sendiri.
560 ohm ke badle konsa resistance use kar sakte hay
470 ohm - 820 ohm
480 ohm ka
its good
Bang klok d tambahin lagi led nya g mas alah kan
Saya sudah mencoba 45 LED dan tetap mantul pada rangkaian ini tanpa mengubah apapun.
@@moristo okeee siapppp aku mw coba nnti mantabbbbb😀
Sukses selalu ya!
3.7 v running possible
use DC to DC step up converter.
Brother could you give the circuit diagram .
You can draw it yourself while watching.
circuit diagram please
There is my video that already show the circut dig on this.
Bang..udah sy coba tp LED nya nyala semua ngk running...gmn bang
Gimana lagi kalau ada yang salah.
I can use bc 547 transistor
NPN transistor, but please pay attention to the EBC pins position.
Thank you so much bro
You are welcome.
Bhai ye jo 10k ohm aur 560 ohm resister he Walt kiya he
10k 0.25 watt, 560 1 watt.
Thanks Sir
yaw
12 v transformer use
Use
ah dapat pala 3 * 3 yung bilang ng led lights!
Oo tama, ito ay 3 * 3.
Can you control the speed?
on my another vid are ready with speed controller, and you will see my video that how to make running led chaser without IC and without Transistor on Christmas tree.
Bang beli lampu lednya dimana ya?
di toko penjual spare part elektronik
Howe is control speed
you can see that in my another vid.
❤
❤