Great job, beautiful work of LEDs work. Don't let the public down , some of them will like to do the chaser light. So please include the circuit diagram.
Peoples without electronic skills doesn't need schematic or circuit diagram to build this circuit, instead peaople with electronic skills can draw schematic diagram.
Finally! A neat circuit for a running light! Thanks! Now I just have to change it a bit. I want to surprise my daughter with a magic wand. It will be partly made of plastic and partly made of wood. It will have a single button. If you press this, the running light starts and the tip lights up. However, I will only use 3 LEDs and then something like a strip of hot glue stick as a diffuser so that it is visible as a rising light ("magic energy") and not as individual LEDs. You wouldn't believe how long I had to look for a usable and neat circuit... Now I just have to reduce it to at best 3V (button batteries) and 3 LEDs and make the length as compact as possible so that it fits into the branch. that the template for the staff fits. The branch is cool! It is slightly thicker at the handle than at the tip and especially the first 5-6 cm are curved and the rest is straight. The stick is approximately 15 cm long. That will be cool! Thanks!
Brilliant, If i wanted it to work as sections of 4 instead of sections of 3 can i just do this by adding one more set of components then looping the led's in 4's not 3's?
If you make 4, 6, 8, etc, Transistors, the result of light movement looks like 2 Transitors (flip-flop). If you make 5, 7, 9, etc, Transistors the result of light movement looks like 3 Transitors (chaser).
Bhai ji apsa video dene k liye apko bahut bahut dhanyavad bhai ji .....kyo aap jo trick diye h bhai ji...ye trick mujhe bahut kaam aayega bhai ji .......mere dil se apko bahut bahut dhanyavad bhai ji
I tried making a copy on a bread board, and fired it up, all the lights came on. I can't tell for sure where you connected the middle lead ( yellow wire) from the potentiometer, as well I'm uncertain where you connected the pos of the LEDs. It took some time to assemble, and am calling it a day. I'll mess with it some more tomorrow. I really like the result you achieved, and I hope to have a working copy soon. Thanks for sharing the video.
@@moristo I purchased 30 of them , and double checked online. E,B,C. I make things with them all the time. I can't waite to get this working, LEDs are Red, White, Blue, Red White Blue, ect. 15 total. I did not have 560 ohm resistor, I combined 2, 270 ohm resistors, = 540 ohm. That should still work. ??
@@moristobro can you make a circuit running like the same, but I need to light up 12 volt bulbs, with + & -ve polarity, instead of LED bulbs. Please and mention me there you upload the video.
Hi Moristo, i presume this is classed as a 3-channel Led Chaser because of the 3 Transistors, do i need to add more transistors in order to maybe have 68-70 Leds ?
Hi. I really liked what you did. I want to ask you, if I add more LEDs, does the voltage vary much? Example: I put 24 LEDs, do I have to change a capacitor? muchas gracias desde argentina
Potentiometer function here as a speed controller. Yes, sure you can make it without potentiometer, but if you make it without potentiometer you will lose that function. Please see my video that without speed controller (title: "No IC running LED, LED chaser with 3 Transistors").
hello ,good job ,i have no electronic skill but easy for me to do.I need 1 Amp output for each led ,does it have 1 amp?If not what must I do?,thank you
Each channel on this circuit is only around 0.02 A, I already test with 45 LED bulbs (15 for each). If you want this circuit works in 1A or above, you have to add 3 pcs Transistor or 3 pcs Relay.
Sir why can't you please give the printed circuit diagrams for all these circuits wether it's inverter or LED chaser power amplifiers etc etc. Seeing this it's very difficult to make these circuits. Its like closing your eyes and assembling a circuit. If you can give drawn circuit diagrams we can print the circuit by net and assemble it with out further difficulties. Im a regular efy Electronics For You reader. In that they put lot of printed circuit diagrams so that we can do the circuits with out any difficulties
I designed my video to be useful for everyone (including those who do not have electronics skills). They do not nedd circuit diagram, they only need to write the text that appears together with each component to be used, then provide it, then watch again to follow how to make it. If you have electronic skills then you can draw the circuit diagram yourself while watching.
i have lots of 690 ohm resistors instead of 4700 or 580 shown in the video will putting them in series make up 4.7k and can 690 be used in place of 580ohm
@@moristo I am trying to make a 40 led (8mm) straight series with this circuit. I have some doubts 1.can I want to change anything 2.if no can I connect 230v ac directly Please guide me
Sure you can do it, but the result with 4 transistors will looks like 2 transistors (flip-flop) and 5 transistors will looks like 3 transistors (just like in the video).
If someone was into modeling landscapes for model railroads etc, and wanted to make an airport and runway as part of the modeled landscape, this would work good for the "Rabbit" sequenced flashers that the runway approach lighting systems use. Five micro, white LED's for MALSF and MALSR, eight for SSALR and SSAL, and fifteen for ALSF-1 and ALSF-2.
friend, maybe you will interested for "no IC, no Transistor" running led chaser circuit. If Yes, you can find it on my "RUNNING LED CHASER !! DIY" playlist. Thank You for always supporting me.
Sin cambiar los valores de los componentes, he probado este circuito con 45 LED. Si el canal (transistor) que crea es 4 o 6 u 8, etc., entonces el resultado es el mismo que el de los 2 transistores. Si obtiene 5 o 7 o 9, etc., el resultado es el mismo que el de los 3 transistores.
I soldered everything to a strippboard. Works for me also with S9014, had no S9013! If I use 30-50 LEDs, would you prefer to resist 1Watt or 2Watt 560ohm? Thank you and best regards to Indonesia
Can you make this a 4 or 5 channel chaser by adding more more transistors, capacitors? Also can you make all the leds light up at the same time by jumping over the variable pot?
Thanks. How could I use this design to expand and now control 120v low wattage light bulbs? Could the led output be used to control a switching transistor to control a 120 v low wattage light bulb?
My video created for everyone even without electronic skills. Circuit diagram is only for persons that who have electronic skills, instead, that who have electronic skill can draw it self.
Great job, beautiful work of LEDs work. Don't let the public down , some of them will like to do the chaser light. So please include the circuit diagram.
Peoples without electronic skills doesn't need schematic or circuit diagram to build this circuit, instead peaople with electronic skills can draw schematic diagram.
@@moristo alangkah baiknya sertakan skema biar semua bisa belajar membuat itu
@@masa5460 Yang sudah bisa baca skema tentu bisa menggambar sendiri skema rangkaian dalam video itu.
@@moristo la videone kurang detail rangkaian e .
@@masa5460 Segala sesuatu mesti nyimak dengan ketulusan pakde, biar ilmunya dapat.
Finally! A neat circuit for a running light! Thanks! Now I just have to change it a bit. I want to surprise my daughter with a magic wand. It will be partly made of plastic and partly made of wood. It will have a single button. If you press this, the running light starts and the tip lights up. However, I will only use 3 LEDs and then something like a strip of hot glue stick as a diffuser so that it is visible as a rising light ("magic energy") and not as individual LEDs. You wouldn't believe how long I had to look for a usable and neat circuit... Now I just have to reduce it to at best 3V (button batteries) and 3 LEDs and make the length as compact as possible so that it fits into the branch. that the template for the staff fits. The branch is cool! It is slightly thicker at the handle than at the tip and especially the first 5-6 cm are curved and the rest is straight. The stick is approximately 15 cm long. That will be cool! Thanks!
Nice project, goodluck, greetings to your daughter.
Very clearly demonstrated. Thanks
@@moristo
I am interested for simpler one (even a very basic one would be more helpful)
Thanks
I always doing research for any unique electronic circuit
@@moristo please tell me -
How to make 12V LED Chaser.(I want input and output voltage 12v)
Please watch this video completely.
@@moristo 220 volt ka kya circuit lagega please bataiye
Karya bagus
,pencahaya'an,listrik,elektro selalu kita butuhkan dalam keseharian untuk beberapa aplication
Brilliant, If i wanted it to work as sections of 4 instead of sections of 3 can i just do this by adding one more set of components then looping the led's in 4's not 3's?
If you make 4 it will looks like 2 transistors (flip-flop).
@@moristo Thanks for the reply, I need it to be in 4's oh well
If you make 4, 6, 8, etc, Transistors, the result of light movement looks like 2 Transitors (flip-flop).
If you make 5, 7, 9, etc, Transistors the result of light movement looks like 3 Transitors (chaser).
@@moristo thank you. I will try this
okey, good luck my friend.
Bhai ji apsa video dene k liye apko bahut bahut dhanyavad bhai ji .....kyo aap jo trick diye h bhai ji...ye trick mujhe bahut kaam aayega bhai ji .......mere dil se apko bahut bahut dhanyavad bhai ji
aapaka svaagat hai
@@moristo bhai ji plz reply me bro
What do you mean bro.
Hey Friend Thank You Soooo Much For My Help. Because I Need This Video. Thank You.
Allah Bless You
Allah will bless you too friend
Actually u created your own IC and then used it. Anyway hats off sir!
This circuit is without using any IC.
The result for 4/6/8/10 channels will looks like 2 channels, and 5/7/9/11 channels will looks like 3 channels.
@@moristo What they mean is that what you've built replicates the internal guts of an IC
Each independently component can't be called as an IC.
Mantap gan tutorial'y dpt di mengerti.. sukses lah maju trs bwt kreasi'y
Terima kasih atas dukungannya.. sukses selalu
Gimana cara bikin rangkaian Led yg banyak buat hiasan jalan depan rumah di bulan Agustusan /kemerdekaan
@masbagio293 coba LED strip yang pake Micro-controller.
Wow mantap, bisa di control kecepatan nya, hebat a.
Iya 😁👍 gitu deh, ala kadarnya.
Incredible work bro, finest assembly, i'am amazing, greetings and congratulations from Mexico!
thank you my friend.
Bhut achha lga thanks*** kush bol kr bhi smjaya kro fir jldi smj aati hai
******* thanks****
apaka svagat
Nice....अच़्छा लगा व्हिडीअो...मस्त सर......
पाहणे आणि टिप्पणी दिल्याबद्दल धन्यवाद.
Nice idea. I will make like that too and i will put it on my motorcycle for led flasher. I hope you like it because i will show it to you
okay... but don't re-upload my videos
Moristo Lekka okay sir. I will not reupload your video. I just use your idea because i wanna be like you. I hope you will help me how to be like you.
please be better than me
রঞ্জু
Thanks.
Good job! After I have seen your video, I put thumb up and subscribe your channel.
Thank you so much.
Knight rider eat your heart out! Great job!
Thank You.
Nice projekt
Dhanyavaad.
Hi brother how many led light will support for this circuit board tell me please
I don't have tried... so I'm not sure
I tried making a copy on a bread board, and fired it up, all the lights came on. I can't tell for sure where you connected the middle lead ( yellow wire) from the potentiometer, as well I'm uncertain where you connected the pos of the LEDs. It took some time to assemble, and am calling it a day. I'll mess with it some more tomorrow.
I really like the result you achieved, and I hope to have a working copy soon.
Thanks for sharing the video.
It will indeed be easier if you have electronic skills, so you must really try hard to succeed, and you need to remember a small mistake can be fatal.
@@moristo I have skills, and yes I already let some of the magic smoke out of the potentiometer. Do you have the schematic available?
so you need be careful, please pay attention to EBC transistor pins, sometimes the different manufacturing of transistor is a different EBC position.
@@moristo I purchased 30 of them , and double checked online. E,B,C. I make things with them all the time. I can't waite to get this working, LEDs are Red, White, Blue, Red White Blue, ect. 15 total.
I did not have 560 ohm resistor, I combined 2, 270 ohm resistors, = 540 ohm. That should still work. ??
2 x 270 ohm in serie connection (not paralel) will work, also you can use 470 ohm.
Thank you for the tutorial, it was very useful for me
I'm happy if my electronic circuit video is useful for everyone.
@@moristo Right! I can draw without it(circuit diagram)
@@markancajas6597 Good.
I made your vu meter and i got supplies to make this also😊😊
good. thank you for watching.
hola exelente video maestro
consulta puedo agregar mas led al circuito?
He probado esto con 45 LED, trabajando normalmente
Can I use other transistor
Like c945,13001,13003,13005
You can use C945 or C1815 but the pin structure is ECB (not EBC like the transistors pin in this video).
Perfecto, funciona muy bien con 5V (un cargador de movil). Gracias
Gracias amigo, nunca lo he probado con 5 voltios, pero puede agregar un circuito de aumento de voltaje para que 5 voltios se conviertan en 12 voltios.
@@moristo ya lo tengo funcionando con 5V, sin agregar nada. Es un buen diseño.
Oh lo siento, supongo que preguntaste. Eres genial para hacerlo.
Disculpen, me podría decir si se puede colocar hasta 100 leds?, o cuanto es el máximo?...
Yo he probado este circuito con 45 LED y sigue siendo bastante bueno.
Excelente felicitaciones!!! Circuito simple fácil de hacer !!!
hopefully it's useful for yoy friend
Buatin skemanya bang
Orang yang ngerti skema bisa menggambarnya sendiri om.
@@moristobro can you make a circuit running like the same, but I need to light up 12 volt bulbs, with + & -ve polarity, instead of LED bulbs. Please and mention me there you upload the video.
Maybe in my futures video.
Sukses ngikutin tutorialnya om......good job om....keep up the good work
thank you mas bro.
@@moristo om punya schematic nya gak...saya mau aplikasikan ke pcb om
skemanya bisa ambil disini: ua-cam.com/video/WhyDfMc9RdA/v-deo.html
Sdh om .....sdh saya save
Sebelum di save do tonton dulu sampai selesai ya!, supaya tidak sia-sia apa yg saya persembahkan.
Damn he's going 3d on that
Did you mean looks like 3 dimension led light chaser?
आपको आवश्यक इलेक्ट्रॉनिक उपकरणों की खरीद की लागत के साथ मदद करनी चाहिए।
Hi Moristo, i presume this is classed as a 3-channel Led Chaser because of the 3 Transistors, do i need to add more transistors in order to maybe have 68-70 Leds ?
did you mean 68-70 channel of transistors ?
Knp punya saya gak bisa berkedip nyala terus LED nya
sudah pasti ada yang salah, atau malah ada transistor yang rusak.
Những con tran nào thay cho con tran 9013 hoặc bc547 vậy ban mong ban chỉ giùm sớm nhất cho mình xin cảm ơn
u can use any npn transistor, just py attention to the EBC pins position
15 led jaiga por or jada led ke liye ki same rester capasiter etc same lagega?plz bataye
samaan mooly ke 45 LED
Hi. I really liked what you did. I want to ask you, if I add more LEDs, does the voltage vary much? Example: I put 24 LEDs, do I have to change a capacitor? muchas gracias desde argentina
I have already try this with 45 LEDs and still pretty good without change anything.
@@moristo OK thank you very much
YAW
Very nice way
Thank you, please see my other videos, maybe some video of that will be useful for you.
it's cool! Can make without the potensiometer?
Potentiometer function here as a speed controller.
Yes, sure you can make it without potentiometer, but if you make it without potentiometer you will lose that function.
Please see my video that without speed controller (title: "No IC running LED, LED chaser with 3 Transistors").
kya es capacitor ki jagah 100mf aur 25v ka laga skte hai
more than 16 volt (16 volt above)
Bahut acche bhai
thank you bro
wow... thank you for sharing... great job and more power on your channel
Thank You very much.
i like this very much, will it still run on 6volts supply?
maybe, I don't have try it with 6 volt.
Mantap sahabat ku sukses selalu
Salam sukses juga masbro.
Any thoughts of supplying made up bags of components as a kit? Could be popular?
I don't know, but actually could be out there there's someone who wants to do that.
Hello sir,
Can I add 250+ 8mm LED bulbs to this circuit?
Nice job...good luck
please see my another vid for unlimited LED bulbs.
@@moristo thank you sir, can you please provide link to that video, I have gone through your all videos but didn't found that one..thanks
RUNNING LED CHASER ! DIY playlist
Do you want to change anything when using 40 led bulbs?
I already test on this led chaser circuit using 45 led bulbs without change anything.
@@moristo Then how many volts is required for this to work
you can try with 9 up to 15 volt DC current
@@moristo ok tnx
YAW.
How many LEDs can be join in this...if I want to add 150 LEDs then it will work?
I have already test just 45 LED lights on this circuit with pretty good result.
Terima kasih bosku...bermanfaat sekali
Sama-sama terima kasih.
hello ,good job ,i have no electronic skill but easy for me to do.I need 1 Amp output for each led ,does it have 1 amp?If not what must I do?,thank you
Each channel on this circuit is only around 0.02 A, I already test with 45 LED bulbs (15 for each).
If you want this circuit works in 1A or above, you have to add 3 pcs Transistor or 3 pcs Relay.
@@moristo thank you very much
You are welcome.
Very nice
thank you
Mantap bos, bos bisa minta tolong ada tdk untuk dari sumber tegangan 3 volt?, kalau ada tolong naikan, saya mau bikin untuk lampu lalin, tks
Sisa menambahkan penaik tegangan 3 volt ke 9 volt atau 12 volt DC maka rangkaian ini akan bekerja pada tegangan 3 volt.
Bang,kalau pakai led selain putih. Apa komponen yang di butuhkan juga sama seperti dalam video ini? Terima kasih atas infonya
sama aja.. asal led 3v
Sir why can't you please give the printed circuit diagrams for all these circuits wether it's inverter or LED chaser power amplifiers etc etc. Seeing this it's very difficult to make these circuits. Its like closing your eyes and assembling a circuit. If you can give drawn circuit diagrams we can print the circuit by net and assemble it with out further difficulties.
Im a regular efy Electronics For You reader. In that they put lot of printed circuit diagrams so that we can do the circuits with out any difficulties
I designed my video to be useful for everyone (including those who do not have electronics skills). They do not nedd circuit diagram, they only need to write the text that appears together with each component to be used, then provide it, then watch again to follow how to make it.
If you have electronic skills then you can draw the circuit diagram yourself while watching.
Nice video sir
thanks, hope this vid useful for you
i have lots of 690 ohm resistors instead of 4700 or 580 shown in the video will putting them in series make up 4.7k and can 690 be used in place of 580ohm
You can use 690 ohm for replacing 560 ohm.
Can I connect a 40 bulb(8 mm)serial led light set in this connection
I already test 15 pcs LED parallel on each channel (15 x 3 channels = 45 pcs LED).
@@moristo I am trying to make a 40 led (8mm) straight series with this circuit. I have some doubts 1.can I want to change anything
2.if no can I connect 230v ac directly
Please guide me
Please reply
Okay I reply with this.
Anyone who just learn electronics should be able to do what is in the video only.
Sir ham ishme 100uf 35v ka capacitor laga sakate hai
krpya
Thanks for sharing this great and accessible project. Greetings from Saltillo, México 🇲🇽 🤗🙋♂️
You are welcome.
Good
thanks.
Can I use more than 4,5 transistor to make this circuit??
Sure you can do it, but the result with 4 transistors will looks like 2 transistors (flip-flop) and 5 transistors will looks like 3 transistors (just like in the video).
Love you video great project have to give it a try.
Thank you, good luck.
Is pr direct 220v led lari laga skte he output me
now you can see my another vid for 220v running light chaser without IC, without Transistor, and without additional external DC power supply.
Sir isme zero bulb ka running Patti chala sakte hai ky
Aap ise svayan aazama sakate hain, mere paas abhee tak LED strip nahin hai.
Hi... Wondering is it possible to operate it with 3.7v battery...
Sure, you can use 3.7 volt battery with DC to DC step up converter to make 3.7 volt into 12 volt.
@@moristo so it means no right... The min operating voltage is 12v...
I have never tried it with 3.7 volt directly, so please test it then tell me the result.
Bhai 240 volt par kam karata he???
Bhai, krpaya mera veediyo dekhen jo 220 volt ke lie hai.
Maximum how much led using this circuit?
I already test with 45 LED lights.
If someone was into modeling landscapes for model railroads etc, and wanted to make an airport and runway as part of the modeled landscape, this would work good for the "Rabbit" sequenced flashers that the runway approach lighting systems use. Five micro, white LED's for MALSF and MALSR, eight for SSALR and SSAL, and fifteen for ALSF-1 and ALSF-2.
friend, maybe you will interested for "no IC, no Transistor" running led chaser circuit.
If Yes, you can find it on my "RUNNING LED CHASER !! DIY" playlist.
Thank You for always supporting me.
Hasta cuantos LEDs puede aguantar de tres en tres ésos circuitos y se puede ampliar o modificar hasta cinco.
Gracias saludos.
Sin cambiar los valores de los componentes, he probado este circuito con 45 LED. Si el canal (transistor) que crea es 4 o 6 u 8, etc., entonces el resultado es el mismo que el de los 2 transistores. Si obtiene 5 o 7 o 9, etc., el resultado es el mismo que el de los 3 transistores.
Great job! Can I use different colour led bulbs or has to be same colour? Thanks.
You can use another colours of 3 volt LED bulbs.
@@moristo Thanks. How about using LDR? Where do you attach it?
LDR is Light Dependent Resistor, it's not LED.
Kya 220 volt ac supply par kam kare ga aur max kitane led lagaye ja sakte hai
agar aap jaanana chaahate hain, to aapako skip ke bina pooree tarah se dekhana hoga
Hi there can we use 25v 100uf capacitors?
Plz reply
Sure, you can use it, it's good if that a genuine capacitors.
Great video! I would like to have one light at a time going down the line. Would I just use one channel instead of 3 as you did? Thank you!
LOL, this cicrcuit can not do that
@@moristo why
you know that.
How to make it 24v ready to be use in a truck?
@@moristo but my bulbs are 24v in the truck
you need another circuit.
Sir ji Aapke is chejar per kitne led ka load dal sakte hai
Maine 45 LED koshish hai, aur parinam abhe ache hain.
I soldered everything to a strippboard. Works for me also with S9014, had no S9013! If I use 30-50 LEDs, would you prefer to resist 1Watt or 2Watt 560ohm? Thank you and best regards to Indonesia
for 50 LED please use 1 watt, thank you my friend
Aku sangat terbantu adanya vidio ini
saya merasa senang jika video-video saya bisa bermanfaat untuk semua orang.
Hi friend,
Can I use 10k preset instead of potensiometer in this circuit.
Sure, you can use it.
Can you make this a 4 or 5 channel chaser by adding more more transistors, capacitors? Also can you make all the leds light up at the same time by jumping over the variable pot?
4 channels result is same with 2 channels (flip-flop), 5 channels is same to 3 channels chaser.
Thanks. How could I use this design to expand and now control 120v low wattage light bulbs? Could the led output be used to control a switching transistor to control a 120 v low wattage light bulb?
please see my another vid on "Running LED cahser ! DIY" playlist.
Sir ish circuit me 40 ya 50 led laga sakte hai Kaya
of course, but u have to use more than 1 watt for all 560 ohm resistors
Thanks
YAW.
very good top
Thank you mas bro.
Mantap lampu lednya bang
Terima kasih, semoga bermanfaat.
Mantap Om..
Trims ya.
Tetap semagat untuk ber karya brooo
terima kasih
Is it possible to run this circuit on a 9 v dry battery ?
9 volt is okay.
Bro ac current ke upar ye kesse chalega Jara ek vdo dena
can u speak english
Bisa buat lebih banyak lampu gak misal 50 lampu masih kuat gak bang?
Saya sudah tes rangkaian ini dengan 45 LED dan hasilnya masih bagus, jadi kemungkinan besar 50 masih oke.
Can I use 50k potentiometer
You can use it, but it's not pretty good potentiometer value on this circuit.
Good design
thanks.
Great. Awesome n thanks sir..
Anung power supply po gamit dyan?
you welcome friend
That led circuit plip plop which is set..... tanks
flip-flop is only use two transistors
Nice. Can i see the circuit diagram for my better understanding??? T.y.
My video created for everyone even without electronic skills. Circuit diagram is only for persons that who have electronic skills, instead, that who have electronic skill can draw it self.
Good day Sir!
Can I use battery that circuit?
sure, you can use 12 volt battery
can i combine two 9v batteries?
u can use single 9 volt battery
Thank you so much! 💗
YAW.
I couldn't find 16v capacitor. I have 25v capacitor. Will it work? Do I need to alter any resistor value? Please reply.
As long the capacitor voltage more than the source voltages, it's okay.
@@moristo Thanks for prompt reply sir. Waiting for your next projects.
thank you
Satu rangkaian itu mampu berapa set lampu boss
saya sudah tes 45 led,, mungkin lebih dari itu masih bisa
Can you tell me the value if resistance for 3 sets 10 10 LEDs
I already test with 45 LED bulbs without change any component value in this circuit, and the result still pretty good.
Bhai ye sada jhalar par kam karega
aapakee salaah ke lie dhanyavaad
Woww you have done a great work🔥🔥
Thank you man.
Can we give 5v power supply?
Sure, with DC to DC step up converter (5v to 12v).
Sir I don't have it what happens if I give direct 5v power supply
Just try, you'll know it.
Will it damage the circuit and leds
I don't think so.
0 wat ke balf ki bhi sirij bana sakte he kya isse
Krpaya ise behatar banaane ke lie angrejee mein.
Maximum kitni led use kr sakte han
60 ya usase kam.
Good question
nice.
Car indicators. Work like this 🤩.
So you have to try making this circuit.
Can i use different color led's
Sure.
Sir can I use here 100uf 25v clco or bc547 transistor
Yes, you can use it friend.
Can i used anytype of npn transistor??
yes, sure, but you have pay attention to the EBC pin position
Can I use 103 potentiometer instead of 10k potentiometer?
10(3) meaning is 10(000).