The reason for the difference is because torque pro reads factory data, however the factory data is a combination of ambient temp, and a hybrid transmission temp calculation. The factory manual explains it on my IG instagram.com/p/B_O-DYTnMIi/? from a post on 21 April 2020
@@TweakedGSX so i did check it i will no longer wait till it gets to 70c on the torque pro by 60c ill start to run it hard. So if i was waiting for it to reach 70c it was really at 80c wow. Thanks for the help and the video.
Hi, where can I get the advanced ex plugin from please? I've got the torque pro app, but when I click on get plugins it links to a page with a playstore link that doesn't work.
It was pulled by the developer a few months back for unknown reasons ( well other than the fact that it made some ridiculously hillarious readings). This means you have to search in Google to find the file and risk Installing. Theres a better option out there now via the Lufi XS and I'll have the video up soon
Hey question. Do I just need to download this app on my android Head unit and it will work? Or do I need other things in order for this app to work. I dont wsnt to spend ,$5 yet if it wont work just from downloading
You need to pay for torque pro and the advanced ex for Mitsubishi app plugin. 2 apps from the app store. You will also need an obd2 reader that is ideally v2.1. you can check the version as shown in the video.
Hey mate, I don’t have android but hoping to set up Tran temp on my obd device. Would you be able to get the Tran temp pid and equation from your Torque app? Thanks in advance
You need to pay for and download the additional plug in called advanced Ex for Mitsubishi. Then go to plugins and add Lancer 08 PID's. Once you do that, add the SST temperature gauge to your gauge screen
Hi, do you have any idea why I need to set advanced ex PIDS every time when open torque app.
You have to allow pid's permissions in torque pro settings screen
Hi, could I have the full instructions. Thanks
I'am wondering if you can change the display to mimic the Skyline R34 display gauges?
I haven't seen that but there are a number of different themes you can trial for free from within the app that lets you connect to the store
So the torque pro app reads 10 degrees lower then what it really is?
Using all stock oem components on the sst.
The reason for the difference is because torque pro reads factory data, however the factory data is a combination of ambient temp, and a hybrid transmission temp calculation. The factory manual explains it on my IG instagram.com/p/B_O-DYTnMIi/? from a post on 21 April 2020
@@TweakedGSX thanks a lot will check it.
@@TweakedGSX so i did check it i will no longer wait till it gets to 70c on the torque pro by 60c ill start to run it hard.
So if i was waiting for it to reach 70c it was really at 80c wow.
Thanks for the help and the video.
Hey mate how do I setup engine oil temperature ? It is not green to me
It's more than likely your OBD2 reader. Change to the one found in the ak racing store
Hi, where can I get the advanced ex plugin from please?
I've got the torque pro app, but when I click on get plugins it links to a page with a playstore link that doesn't work.
It was pulled by the developer a few months back for unknown reasons ( well other than the fact that it made some ridiculously hillarious readings). This means you have to search in Google to find the file and risk Installing. Theres a better option out there now via the Lufi XS and I'll have the video up soon
How do you get the gauges to save? I am a torque newb, but if i back out of the displays screen or close the app my placed gauges disappear
Remove and reinstall the app as that's not normal
Try to create a profile, mine wasn't saving but I was using without a profile
Volts CM your battery voltage?
It’s the Voltage measured at the Control Module (ECU), which is about 0.12Volts lower than the Battery Voltage.
Hey question. Do I just need to download this app on my android Head unit and it will work? Or do I need other things in order for this app to work. I dont wsnt to spend ,$5 yet if it wont work just from downloading
You need to pay for torque pro and the advanced ex for Mitsubishi app plugin. 2 apps from the app store. You will also need an obd2 reader that is ideally v2.1. you can check the version as shown in the video.
Hey mate, I don’t have android but hoping to set up Tran temp on my obd device. Would you be able to get the Tran temp pid and equation from your Torque app?
Thanks in advance
You need to pay for and download the additional plug in called advanced Ex for Mitsubishi. Then go to plugins and add Lancer 08 PID's. Once you do that, add the SST temperature gauge to your gauge screen
Hey can u help me?? How can I find does Expende Pids for my car in the internet??!! Volvo v60 T8 Polestar Engineering 2020. Can u help me
No idea you would need to search Google or Facebook group