Thanks! I followed your instructions in February 2024 with the up-to-date versions and most of what you say is still correct. A few things are a little different, but similar enough to understand.
Process stops with with following messages Leaving... Hard resetting via RTS pin... INFO Successfully uploaded program. INFO Starting log output from /dev/ttyUSB1 with baud rate 115200 Anyone a suggestion? I thaught that my output port and cable were too fast maybe for this baud rate, so I plugged it into an ancient usb adapter (which I used before for this purpose) but no ... nothing happens Screen of the device stays black/dead. Any suggestion is welcome
Home assistant has an integration to allow for tuya devices to show up. You just have to go through the process of connecting your account to home assistant.
Everything no longer works as described and the modified software can no longer handle older ESP installations once an update has been omitted. I will keep my hands off ESP Home in future. The software has become less reliable with every update.
Written guide available here - smarthomeaddict.co.uk/2022/11/introduction-to-esphome-on-home-assistant/
Thanks! I followed your instructions in February 2024 with the up-to-date versions and most of what you say is still correct. A few things are a little different, but similar enough to understand.
1:47 - Where does "home assistant" come from?
Great. Can you make ESP using a realy 5v. i whant to controll some LED lights on 5V using a relay
Process stops with with following messages
Leaving...
Hard resetting via RTS pin...
INFO Successfully uploaded program.
INFO Starting log output from /dev/ttyUSB1 with baud rate 115200
Anyone a suggestion? I thaught that my output port and cable were too fast maybe for this baud rate, so I plugged it into an ancient usb adapter (which I used before for this purpose) but no ... nothing happens
Screen of the device stays black/dead.
Any suggestion is welcome
I will just get a "key is invalid. Please ensure it matches what you have in your configuration" error when i try to add the esp to home assistant
when do you put hier next step how to configure ESPHome (e.g. temperature and humanidty sensor DTH22)
I am working on this now, hoping to release something in the next 2 weeks. Had to get a wide range of easily available sensors in to test properly.
Mine doesnt Show „add-ons“, someone knows why?
You need to be running HAOS or Supervised for this method to work.
after i install mine wont go online
I have tuya Zigbee devises, so can I change over to Home assistant and use my devices?
Home assistant has an integration to allow for tuya devices to show up. You just have to go through the process of connecting your account to home assistant.
Everything no longer works as described and the modified software can no longer handle older ESP installations once an update has been omitted.
I will keep my hands off ESP Home in future. The software has become less reliable with every update.
Has this video already been outdated?
Enjoyed the content; the background music I found distracting.
The music is terrible
I like it)