This is very Helpful thank you for the Content. I have the same model but when I turn it on, it gives a constant Solid Red light and I am unable to power it off using the Power button. I have to just plug off the power cable. Also when I connect to PC I don't get any connection. I don't know what to do now
@@sajtechysolutions6657 Thanks for the Quick Response. Although I tried some of those options but the issue also the Printer cant detect on PC even after plugging in.
Yes, you need to calibrate whenever you change to different size stickers. You can roll it back, but still 2-5 sticker will waste depends on the sticler size.
Set the correct sticker size in printing preferences option of installed printer(under Control Panel > devices and printer) Select direct thermal or thermal transfer option depends on ribbon use. Also please check sensor postion.
Go to Control pannel > devices and printers > right click on zdesigner zd220 > printing preferences > there you can see darkness adjust option. Don't put maximum darkness, it will damage printer head.
NICE
This is very Helpful thank you for the Content. I have the same model but when I turn it on, it gives a constant Solid Red light and I am unable to power it off using the Power button. I have to just plug off the power cable. Also when I connect to PC I don't get any connection. I don't know what to do now
Try to do firmware update.
supportcommunity.zebra.com/s/article/Zebra-Printer-Firmware-Upgrade-Information?language=en_US
@@sajtechysolutions6657 Thanks for the Quick Response. Although I tried some of those options but the issue also the Printer cant detect on PC even after plugging in.
50mm x 25mm 3M Silver Synthetic Label will work on this?
Yes, Use Resin ribbon and set darkness little high 22/23
each time we change the stickers to another size/type, we have to calibrate? quite a lot of stickers wasted. Any way to avoid this? Thank you
Yes, you need to calibrate whenever you change to different size stickers.
You can roll it back, but still 2-5 sticker will waste depends on the sticler size.
PLEASE TELL ME PAPER SETUP
how to actually turn the printer off? it cant be turned off when i press the power button
Press and hold power button atleast 5 to 10 seconds, the printer will turn OFF
@@sajtechysolutions6657 thankyou!
Sir Ham no of page 2 Kaise Kare hame ek bar me do labale print nikhla hai please update
Can we used this printer without ribbon
Yes, that time you need to use direct thermal stickers
When I command for auto callibration then continue blank sticker come out
Check the sensor postion, move it to right end side postion
Zebra ZD220 print nikal nahi raha he
WHEN I SEND COMMAND FOR ONE STICKER THEN AUTOMATICALLY COMING 4/5 BLANK PAGE
Set the correct sticker size in
printing preferences option of installed printer(under Control Panel > devices and printer)
Select direct thermal or thermal transfer option depends on ribbon use. Also please check sensor postion.
How to control darkness
Go to Control pannel > devices and printers > right click on zdesigner zd220 > printing preferences > there you can see darkness adjust option. Don't put maximum darkness, it will damage printer head.
Contacts no