Ham Clock version 3.10 Released
Вставка
- Опубліковано 25 сер 2024
- #hamradio #propagation #hamclock #hfclock
Ham Clock version 3.10 was introduced today. Version 3.09 had caused my Veritium HF Clock to randomly restart. I shot some video footage and sent it to Gino Morello at Veritium. Gino had me experiment to see how it would act if I had Space WX disabled. That seemed to be a common denominator. Gino and Elwood Downey worked yesterday and last night to solve the issue. There was another issue related to the DX Cluster that also gets corrected with release 3.10.
Note: Ham Clock version 3.03 included significant changes related to the DX clusters. Prior to 3.03, every single spot from the cluster to the clock resulted in the clock sending a show/heading command which a very vocal minority of dxcluster sysops objected to. From 3.03 onwards, the heading calculations are done locally to take the stress off of the remote cluster. For versions after 3.03, the clock puts no more load on the dxcluster network than any other user does, which is a good thing. However, the local CPU load is now very high for the stand-alone, ESP version, of the HF Clock. Users of the ESP version of the HF Clock will notice a loss of the ability to tap a callsign in the DX cluster and see the short path plot, beam heading, DX WX, and VOACAP data for the station you clicked on. The processor in the ESP HF Clock is just not powerful enough to keep up with the new programming that was required to minimize the load on the DX cluster servers.
If you are interested in purchasing the stand-alone (wooden) HF Clock, here is a link: www.veritiumhfclock.com
Veritium has a faster unit available if you can supply a monitor and mouse. It is available at this link: www.veritiumhf...
If you only want the Ham Clock software, there is a free download available. Here is a link that shows how to install it on a PC: w4cae.com/wait...
The Inovato Quadra is another option, if you can supply a monitor and mouse. It comes with the software installed. It is available from: www.inovato.com
Below is a list of some DX cluster hosts I have found to be reliable and stable:
Note: If you leave the Login field blank, it will use the callsign you entered in the setup menu. If you have more than one instance of Ham Clock running, use your callsign-1, callsign-2, callsign-3, etc., so the clusters don’t block you for logging in too many times with the same callsign.
port: 7300
host: mayodx.ath.cx
login:
or
port: 7300
host: g6nhu.getmyip.com
login:
or
port: 7300
host: dxc.w1nr.net
login:
Note: G6NHU created a new node that is optimized for Ham Clock version 3.03 or newer. I will post it below. For more information click this link: qso365.co.uk/g...
port: 7300
host: dxspider.co.uk
login:
At the end of this video, you will be able to see a listing of some of the supporters of this channel who made this video possible. These are people who have supported the channel via Patreon membership on a long-term basis. I call them long-haulers. There are 4 levels of Patreon membership, including S5 (Associate), S7 (Executive), S9 (VIP), and S9+ (VIP+). S9+ (VIP+) denotes an S9 (VIP) member who voluntarily chooses to give over and above the amount for S9 (VIP) membership. Without their support, I cannot bring my viewers uncensored content.
I hope you enjoy this video and find it helpful. If you find my channel informative and entertaining, I hope you will consider joining my support group by clicking on: www.patreon.com/N4HNH There are 3 levels of support, including exclusive content. Visibility of premium content is determined by the level of membership you choose. The higher the membership level, the more content you have access to. VIP members are invited to participate in periodic Zoom meetings.
Most videos are visible to the Patreon team members long before they are released for public viewing. Some videos are never released for public viewing. Yearly S7 (Executive) and S9 (VIP) members have access to the menu optimizations PDFs I’ve written for the FT-891, FT-991A, FTdx5000MP, FTdx101D/MP, FTdx10, and FT-710 AESS. Yearly S7 (Executive) members can receive one menu optimizations PDF while yearly S9 (VIP) members can receive multiple menu optimizations documents, plus my FT8 configuration guide for either the FTdx10 or the FT-710 AESS. Future radios might be added. The documents are copyrighted. They shall not be divulged to anyone else without written permission from Doug McAlexander, callsign N4HNH.
N4HNH Radio has a Web site where you can purchase T-shirts with some of the sayings you might hear in the videos. Some of the more prominent videos are featured there as well as a page geared toward ham radio training. Go to: www.n4hnhradio...
Another great way to help support this channel is to click like and subscribe.
73, de N4HNH
Thank you for staying on top of these updates.
I’m trying. I told the Patreon team about it this morning. It took a while to get the video shot and edited. But I gave the Patreon members a heads-up about the update and what it would do for them.
Thank you, Doug.
You are very welcome, Wendell. 73, Doug
Thanks Doug.
You’re very welcome, Jim. 73
Since catching your video on the Innovato Quadra, I ordered one and so far am very pleased with it running on a dedicated monitor. I still need to learn to effectively analyze the data and determine my best use of displayed data. I'll wanna re-watch your ham clock vids.
Thanx for your continued interest in HF radio!
de NR7K
HF is my main focus.
I found the Quatro too slow for my tastes and moved all my ham apps over to the pi5. I installed a 512 gig ssd drive to it and set it to boot for there and turned on the version 3 pcie so the little box is pretty quick. My Hamclock comes up fast and updates quick to. I revamped the Quatro as a small game pc for my 4 year old grandson and the small touch display I bought for it is perfect for him to play pacman. I found myself with some extra time now so I am going thru all my stuff to see what projects I can finally start and finish. Ah, the fun of getting old....
I’m okay with the Quadra, for my purposes. I mainly just set it to show DE WX, cycle through the solar conditions, display the Space WX, and cycle between SDO and moon. The version I have running on my PC is definitely the fastest. I use it for clicking callsigns in the DX Cluster and the SOTA spot list, so I can check VOACAP.
Any chance you can go over setting up the DX cluster?
That’s already covered in one of the earlier videos in the playlist.
@@n4hnhradio I shall return the the list and explore the videos.....