Great video, very well done, easy to follow. The first attempt didn't work. But I just reheated the USB port and pushed it down again and it's charging!
Before taking your phone apart make sure to clean the inside of the type-C connector to remove any lint/dust that may be accumulated inside of it using a paperclip or thin needle of some sort. This is a common type of failure in Type-C connectors.
Thank you so much andy! Really appreciate it. You saved me from replacing the port/buying a new phone. Never imagined there could be so much lint in there!
Thank you so much, please what is the name of the torch, screw driver type, and the aluminum foil tape, tools to open the phone and tweezers/ soldering paste and lead? Thanks and God bless
It's plus screw driver, silver foil tape, hot air gun, guitar pick to open back panel, suction cup for hold back panel, soldering paste, soldering iron, soldering wire,
Hello! Am I understanding correctly that I don't need to apply solder paste to the small surface pin contact points? From the video it seems you de-solder the 4 through-hole mounting pins and re-apply paste to just those 4 mounting holes. I just want to make sure I understand correctly before proceeding with this work today, I bought all the tools/material to fix my daughter's phone and plan to follow this video. Thank you for your help!
I'm starting to think this Moto G6 was not a good of a deal as I was lead to believe! Does anybody make a quality product anymore!?? All these companies want to do is make it last long enough to get your money and go past warranty expiration so they can make more money off of the consumer! Quality, pride, and integrity are becoming a thing of the past!
what is the wax stuff your using and why? and do I have to use the aluminum foil? im going to attempt this when my replacement part comes in Friday. Anything I need to know so I don't screw up?
Wax stuff means a 'soldering paste' and it's used to joint a part of motherboard component, another one copper foil used to heat blocking to save the burn another component
@@amitkeshwar2428 There are two "wax" materials you use. One right before you remove the broken component and also you put it on the pins of the new component right before you install it. The second material is used when you're putting on the new component to the circuit board. Is the first one Flux and the second one paste? Why do you put the flux on the pins of the new component?
Oh I bought the whole board where charging port was at 400 rupees . changed it. Used this phone for 3 years and then bought redmi note 10 pro a week ago.
I really need help because when my moto g6 start showing this type of charging problem i rush to service centre but they just make me go to 3 different service centre and they said me that i got fungus on my charging port and charging port cant be replaced and it would cost me 10k around to fix my phone...
Need to replace charging port, then solution, some service center is cheap repair facilities own responsibility then, approximately 1000 rs. To 1400 price paid, so try online Google location search after talk this company person ask them, cheap repair available or not?
Hello sir mera moto g6 phone hai usme bhi charging ka bahut jyada issue aa rha hai baar baar charging pin ko hilana pdta hai aur kbhi kbhi toh charging ko ulta km aur krne lgta hai aur jaise pehle likha aata tha charging pin lgate hi ki 1 hour to full charge bhut ab charging rapidly likha aata hai mai bahut pareshan ho chuka hu please kuch batao aur to aur charging pin lgata hu 2 mint tk usko maanta hai uske baad wo apne aap disconnected ho jati hai
What you could do, is turn your phone off, then hold the volume down button and the power button. You will now be in the bootloader. You can charge the phone here to about 65%, because it stops charging at some point and then your phone is on without being charged. When I do this overnight, I have about 65% battery left in the morning.
Mera phone Moto g6 h but Mera fon automatically switch off ho ja rha h or Mera phone warentty period me h but service center le gye but bna no pae wo log
Bhai Mera Moto g6 totally charge nahi ho rahahe or jo battery me wobhi percentage 0 dikha rahahe.or switch off me change betha nese ? symbol dikha raha he
This is why I don't like Motorola phones because of stuff like this I'm not happy about this at all time for me to switch to another phone brand instead of Motorola phones
After watching this I am perfectly comfortable with getting a new phone.
Lol same
Haha
😂😂😂
Or at least a new mother board but replacing the battery and screen at the same time would equal the cost of a new phone
True bro
Great video, very well done, easy to follow. The first attempt didn't work. But I just reheated the USB port and pushed it down again and it's charging!
Good, thanks for watching
Before taking your phone apart make sure to clean the inside of the type-C connector to remove any lint/dust that may be accumulated inside of it using a paperclip or thin needle of some sort. This is a common type of failure in Type-C connectors.
Worked like a charm. Thanks! You just prevented me from destroying my phone
Same for me! Thanks for the tip!
Most welcome
Thank you so much andy! Really appreciate it. You saved me from replacing the port/buying a new phone. Never imagined there could be so much lint in there!
Thank you so much, please what is the name of the torch, screw driver type, and the aluminum foil tape, tools to open the phone and tweezers/ soldering paste and lead? Thanks and God bless
It's plus screw driver, silver foil tape, hot air gun, guitar pick to open back panel, suction cup for hold back panel, soldering paste, soldering iron, soldering wire,
Hello! Am I understanding correctly that I don't need to apply solder paste to the small surface pin contact points? From the video it seems you de-solder the 4 through-hole mounting pins and re-apply paste to just those 4 mounting holes. I just want to make sure I understand correctly before proceeding with this work today, I bought all the tools/material to fix my daughter's phone and plan to follow this video. Thank you for your help!
Most welcome, and good luck
Verry nice but orignal kais charging socket patta chalega.
Ye parts service center mai hi original milte hain
I'm starting to think this Moto G6 was not a good of a deal as I was lead to believe! Does anybody make a quality product anymore!?? All these companies want to do is make it last long enough to get your money and go past warranty expiration so they can make more money off of the consumer! Quality, pride, and integrity are becoming a thing of the past!
lol
what is the wax stuff your using and why? and do I have to use the aluminum foil? im going to attempt this when my replacement part comes in Friday. Anything I need to know so I don't screw up?
Wax stuff means a 'soldering paste' and it's used to joint a part of motherboard component, another one copper foil used to heat blocking to save the burn another component
@@amitkeshwar2428 There are two "wax" materials you use. One right before you remove the broken component and also you put it on the pins of the new component right before you install it. The second material is used when you're putting on the new component to the circuit board. Is the first one Flux and the second one paste? Why do you put the flux on the pins of the new component?
Paste or Flux attached to new component in motherboard, it's a optional, not a compulsory
What is the foil stuff your using at 2:19?
Silver foil tape used to protect components against heating
@@amitkeshwar2428 Could I use Kapton tape?
Oh I bought the whole board where charging port was at 400 rupees . changed it. Used this phone for 3 years and then bought redmi note 10 pro a week ago.
what is that silver tape? thx
It's silver foil tape used to protect against blower heating
where can i find the tools for this?
Aleaxperess, amazon, eBay
Heatgun temperature?
400 Celsius to 600 degree Celsius
@@amitkeshwar2428 thanks expected a lot less for some reason
Kiya apka pass moto g6 plus la motherboard mil jaya gaaa
Nahi, aapko service center mai hi jana padega, aapke city mai
where can i buy moto g 6 sub board spare
It's not separate part of sub board in moto g6, it's combined motherboard, moto g6 play have separate part design
@@amitkeshwar2428 okey sir my moto g 6 is not charging and dose not detect what do i do
Visit my channel for moto g6 charging related videos, and watch it, you can get solution
@@amitkeshwar2428 where can i buy moto g6 charging socket you have a link
Please visit on service center in your city for original part
moto g6 question mark change problems please help me
I really need help because when my moto g6 start showing this type of charging problem i rush to service centre but they just make me go to 3 different service centre and they said me that i got fungus on my charging port and charging port cant be replaced and it would cost me 10k around to fix my phone...
Need to replace charging port, then solution, some service center is cheap repair facilities own responsibility then, approximately 1000 rs. To 1400 price paid, so try online Google location search after talk this company person ask them, cheap repair available or not?
Get a script Xanax before:
Iam also facing same thing
@@amitkeshwar2428 i need half
What is problem found in your phone
I just opened up my phone. What is the manufacturer and part number of the USB c port please?
Name is type C USB connector
Sir bord ka print nhi ha oska solution bato charging ka
Aapko service centre Mai Jana padega
Hello sir mera moto g6 phone hai usme bhi charging ka bahut jyada issue aa rha hai baar baar charging pin ko hilana pdta hai aur kbhi kbhi toh charging ko ulta km aur krne lgta hai aur jaise pehle likha aata tha charging pin lgate hi ki 1 hour to full charge bhut ab charging rapidly likha aata hai mai bahut pareshan ho chuka hu please kuch batao aur to aur charging pin lgata hu 2 mint tk usko maanta hai uske baad wo apne aap disconnected ho jati hai
Moto g6 charging related videos mere channel mai dekh lo, solution mil jayega aapko
Mine here simply wont charge, it's perfectly welded, what I am doing wrong? It starts to charge but them stops and start again
I am having the same issue. It only charges to 4% while off and not at all while powered on
This is happening to me to. Any soloution yet?
What you could do, is turn your phone off, then hold the volume down button and the power button. You will now be in the bootloader. You can charge the phone here to about 65%, because it stops charging at some point and then your phone is on without being charged. When I do this overnight, I have about 65% battery left in the morning.
@@LoekTheKing Weird I will have to try that. Thx
Trisha Longmire same problem with mine
From where I can get the USB port for moto g6
Service center
Mera phone Moto g6 h but Mera fon automatically switch off ho ja rha h or Mera phone warentty period me h but service center le gye but bna no pae wo log
Aapka phone warranty mai hai to aapko service center hi jaake solution milega, aur wo aapka motherboard change kar denge, app boliye unko
Bhai Mera Moto g6 totally charge nahi ho rahahe or jo battery me wobhi percentage 0 dikha rahahe.or switch off me change betha nese ? symbol dikha raha he
Aapke phone mai motherboard ka Problem hai, USB connector ke uper components lage hai small small, unka issue hai,
Mujhe original charging jack kaha milega
Service center
@@amitkeshwar2428 apne kaha se khari da sir
Mai service center mai job karta tha pahle, ab nahi
@@amitkeshwar2428 bhai apka number do na plzzz. 🙏
Aap kaha se ho
Solder paste name pls
It's not a recommended special company, you can buy any one brand purchase
what is your phone No. & aap kanha par mil sakte hain?
Aap kaha se ho?
@@amitkeshwar2428 I am from Delhi, Shastri Nagar
@@DineshSharma-hb3pw i from nagpur, maharashtra
@@amitkeshwar2428 kya yanha Delhi me koi link hai aapka ?
@@DineshSharma-hb3pw nahi sir, mera koi link nahi hai, sorry, best solution hai service center
Mere phone me bhi same problem h Moto g6
Follow the steps of my video
This is why I don't like Motorola phones because of stuff like this I'm not happy about this at all time for me to switch to another phone brand instead of Motorola phones