How to order SMT Stencil on JLCPCB

JLCPCB 1-8 layer 5 PCBs for $2. Get a $54 coupon here: jlcpcb.com/?fr...
How to get a $7 3D printing coupon: 3d.jlcpcb.com/...
How to make/order SMT Stencil at JLCPCB.com, tutorial on how to order PCB SMT Stencil at JLCPCB, this SMT stencil is very useful in soldering components, especially SMD components on PCBs. Its function is to put molten tin on the PCB pad so that it is faster, not one by one.
And here is an example of the SMT Stencil that I ordered via JLCPCB, along with the PCB that I will solder later, actually I wanted to make this TPA3255 Amplifier content, but because there are still a lot of path changes to be made and there are additional preamps, so I just made a way to make SMT Stencildi JLCPCB.
We can adjust the dimensions of this SMT Stencil, if the dimensions are larger than the PCB, for a thickness of around 0.2mm. and for the pad holes, we choose the location of the SMD components, the location and dimensions of the holes are exactly the same as the PCB, so you don't need to worry if there is not enough or too much molten tin. so the measurements are right for soldering components. The method is quite easy, just place the stencil on the PCB, then fit it into the hole on the SMD pad. Just put molten tin in the hole in the pad. This is easier than putting molten tin one by one onto the PCB pad. and the results will also be better and faster using SMT stencils.
To make an SMT Stencil like this, it's very easy, just use a Gerber file, like PCB printing, usually we can order SMT Stencil at the same time.

[@AR-yp4vl]

Udah gak sabar lihat hasilnya tpa3255, kalau dah fix saya mau pesan mas. Di tunggu hasilnya
Makasih🙏

[@yuliapp7227]

Cikarang nyimak masse
Terus kapan tayang test load? Wes ra sabar lihat hasile
Maturnuwun

[@sidineiveiga7839]

Como faço pra comprar seus amplificador digital

[@apriprabowo2629]

mas.ukuran ideal untuk tr driver class ab itu brp iya?
trima kasih

[@unk_48]

Mas,kalo speker diseri/parelel,apakah daya speaker akan meningkat?

[@friskafiyana]

Halo kak. Apakah ada kontak yg bisa dihub untuk mereview produk kak😊

[@jstwatchnread8420]

Bisa ndak mbikin PCB self soldering di JLC?

[@WahyuEkoRomadhon]

Mkstnya gmn maas?

[@jstwatchnread8420]

PCB yg layer 2 nya dikasih alur tipis yg berfungsi sbg heater, kalo sdh jadi berfungsi sbg ground, linknya: ua-cam.com/video/x0A-hQZpsQo/v-deo.htmlsi=epxqKDtGUe04mYce