More content buddy your doing great show these folks your day to day show them your real skills this guys one of the baddest Carpenters this side of the Mississippi
You should have to go smaller with your jets main and pilot more restriction will make it run rich. A bigger less restrictive snorkel will help to. You will lose some power no matter what with a snorkel cause it makes it more restrictive. Also it depends how you ran the snorkel. Did you run it off the airbox still using the air cleaner or straight off the carb?
I have one that i just put a new carb on ran great but after a while it started to idle really high loosened the throttle srew a good bit but it still does it dunno if the needle is stuck a certain way or not still drives fine jusy idles really high in neutral and moves on its one in gear
Check the adjustment on your throttle cable might not be the carb. If that doesn't work spray something flammable around intake gaskets, if it idles up when you do that it's hot a bad gasket.
How would the factory jetting be that far off?
More content buddy your doing great show these folks your day to day show them your real skills this guys one of the baddest Carpenters this side of the Mississippi
Thats not what I want to do man, I've always been able to do anything i wanted to. I dont want to work on houses. I appreciate it though.
@@borninabarncustoms6767 i hear ya we got this race car finished up you need to come show off ur work
Just snorkel a timber wolf and it cuts out but take the snorkel off it runs good so doI need to go bigger in jet size
You should have to go smaller with your jets main and pilot more restriction will make it run rich. A bigger less restrictive snorkel will help to. You will lose some power no matter what with a snorkel cause it makes it more restrictive. Also it depends how you ran the snorkel. Did you run it off the airbox still using the air cleaner or straight off the carb?
Just a tip: you might set the engagement speed lower on the CVT for smoother input
Theres no cvt on this bike. It has a real 5 speed semi auto transmission
85 To 90 Jet In Carburetor timber wolf 🐺 what does it really do ?
I have a 92 and it will not run good with airbox cover on it sputters but when i take the airbox cover off it runs like new?
Hello could u please instruct me as to how to jet a timberwolf carb so I can use a pod style air filter.??
I have one that i just put a new carb on ran great but after a while it started to idle really high loosened the throttle srew a good bit but it still does it dunno if the needle is stuck a certain way or not still drives fine jusy idles really high in neutral and moves on its one in gear
Check the adjustment on your throttle cable might not be the carb. If that doesn't work spray something flammable around intake gaskets, if it idles up when you do that it's hot a bad gasket.
@@borninabarncustoms6767 thanks ill try that tomorrow
I'm new to carb tuning whats those gold screws called you put in there. 90 to 110? Idk
Jets
I have a 96 Timberwolf Will not idle. Can anyone Help me out.
Just bought a cheap carb off Amazon 25 bucks comes with 2 jets use the larger.
Hey I have the same atv mines smoking a little bit and it's got a weird smell when it does what could that be?
Man its probably burning oil. Top end kits are pretty cheap. I think they are a little over $100. New jug, piston, and gaskets.
Truin to listen to your progress mate but i wanna hear you not the music cheers
I will keep that in mind, on the next video I make. I really appreciate the advice!
Nice job driving over some poor sob's lawn.