@@KarthikVippala Thank you. I watched it today multiple times and I feel grateful for your illustration. As you started from the basic concept and ended at two selections for MUX for 4 bits output. Could you help me visualize how to use the 4-bit configuration in a modular way to produce 16-bit output? I understand we need to use 4-bits as select lines, but the MUXs have only 2 bits select lines, how could we possibly make correct mapping?
@@KarthikVippala its OK.u can do it later .atleast can you say what topics are u going to upload.topic should be entirely different from other UA-cam channels.tq.jai barath
Hey thanks for asking, it's similar to barrel shifter shown in the video we need to add few more logic blocks . I don't have the code , but I can help you ,if you are stuck, good luck, good health 👍😊
@@KarthikVippala yeah. Thank you for the response. can you send me the schematic diagram for barrel shifter for rotate left using any type i mean cmos or transmission gate any type of simulation diagram
Hi sir I m suresh.can u clear my doubt. If counter has 10 flip flops . counter is initially set zero ,then after 2078 clock pulses what might be the decimal number that counts??
Hey thanks for asking the question , If 10 flops are there then we can count till 1023 , that me after 1023 we will get 0 again at 1024 this will repeat so at 2048 we will get 0 2049 = 1 So we Keep on doing it we will get 30 at 2078 hope this clears your doubt.
This was a beautiful explanation, I saw it more than once at first to get things clearly but once I got it 16 bit was so easy.. ThankUU!!!
Namaskaram AFSHAN 🙏, thank you , good luck, great health 👍😊
Great explanation, thanks for your video!
Your welcome☺
Nice and clean explanation. Thank You !
Your welcome🙏
Thank you so much. I will listen to it more to gain a better understanding.
Namaste Mohamed Eljahmi🙏 , thanks for support and taking time to re-watch , good luck & great health 👍😊
@@KarthikVippala Thank you. I watched it today multiple times and I feel grateful for your illustration. As you started from the basic concept and ended at two selections for MUX for 4 bits output. Could you help me visualize how to use the 4-bit configuration in a modular way to produce 16-bit output? I understand we need to use 4-bits as select lines, but the MUXs have only 2 bits select lines, how could we possibly make correct mapping?
awesome explanation❤
Thank you so much
Awesome! Thank you for you work, keep going
Namaste Barlowe🙏, glad you liked it, good luck & great health 👍😊
Great Explanation
Thank you🙏
What would change in rotate left?
Nice Vid! Greetings from Germany
Thanks stuki06 , hope you are doing great , good luck 👍
Can u upload some more tricky questions like this and also i m very appreciate to dual priority encoder .
Hey anuradha , thanks for the support , I will do them but it requires some time.
Thank you so much , good luck👍
@@KarthikVippala its OK.u can do it later .atleast can you say what topics are u going to upload.topic should be entirely different from other UA-cam channels.tq.jai barath
Yup I will let you know whe I do them
👍
Can't u say topics😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠😠
Reply
Good explanation. Thank you.
Thanks for the feedback .👍
Very good content !!!!!!!!!!!!!!!!!
Namaskaram Hemant _/\_ , good luck & good health:)
How to perform 16bit circular rotations using multiplexers, code in verilog?
Hey thanks for asking, it's similar to barrel shifter shown in the video we need to add few more logic blocks .
I don't have the code , but I can help you ,if you are stuck, good luck, good health 👍😊
@@KarthikVippala but how exactly can we implement this using mux in code?
THANK YOU MAN !!!!!!
Namaskaram 🙏 Bora, good luck, great health 👍😊
hi sir, this is kiran. could you please explain the procedure for rotate left operation for the same example.
I can help you ,if you have questions ,but I can't make a video on it . Good luck, good health 👍😊
@@KarthikVippala yeah. Thank you for the response. can you send me the schematic diagram for barrel shifter for rotate left using any type i mean cmos or transmission gate any type of simulation diagram
@@KarthikVippala what would be different if it were to rotate left
Hi sir I m suresh.can u clear my doubt.
If counter has 10 flip flops . counter is initially set zero ,then after 2078 clock pulses what might be the decimal number that counts??
Hey sharath , please stop spamming with other accounts , I will not respond back if you do this kind off activity
Hey thanks for asking the question ,
If 10 flops are there then we can count till 1023 , that me after 1023 we will get 0 again at 1024 this will repeat so at 2048 we will get 0
2049 = 1
So we Keep on doing it we will get 30 at 2078 hope this clears your doubt.
thank you i have exam tomorrow
All the best 👍,hope you do great in your exam 🙏
is it m log 2^m?
Can you give me the vhdl code for this?
I can help you with your doubts while coding , but can't give it .
Good luck, good health 👍
Its bits not beds
Thanks for correcting!🙏
You are an INDIAN but still using false accent?
Namaskaram 🙏 Akanksha, I am trying to change it and improving on it , thanks for the suggestion, good luck & great health 👍😊
@@KarthikVippala telugu na meeru 😊by seeing your name I guess
Namaskaram🙏 pavani avunu andi
nice sir but pls dont use fake accent it is very
disturbing
Thanks for feedback, improving on it🙏
Bakwass accent
Improving on it dev 👍