INFINITI Q50/Q60 Fuel-It Flex Fuel Kit Installation
Вставка
- Опубліковано 20 сер 2024
- In today's video we still the Fuel-It Flex Fuel Kit which is my first mod on the list before we install the fuel pumps. Also keep in the mind the fuel filter is completely option during this installation and it is not required.
SUBSCRIBE to my channel here!! / midwesthoonigan
Follow me on Instagram for behind the scenes content!
www.instagram....
Follow the Midwest Hoonigan Facebook page here!
/ midwest-hoonigan-14107...
Fuel-IT Flex Kit
www.fuel-it.co....
Fuelab Filter amzn.to/2S9CyUa
Russell 640003 6AN Female to 6AN Female amzn.to/2MBdekM X2
Russell 640854 6AN Male to 3/8 Quick Disconnect Female amzn.to/2DE4mrI
Russell 640940 6AN Male to 3/8 Quick Disconnect Male amzn.to/2Sau4MB
excellent install video! I like how you take the extra steps to keep a clean engine bay. The painters tape was a extra step which demonstrates your malicious attention to the care you take when doing work on your car. 👍👍
Great tutorial. You showed everything clearly and made it look easy. Mine comes in tomorrow and ima be using this to install it
Sometimes when you do a DIY, you explain what the reason/benefits of the mod is for. Sometimes you don't. I think you always should. This is definitely one time I wish you did.
That’s because you didn’t watch the previous videos leading up to this where I actually took the time to explain it all.
Been looking forward for this video🙏
Thank you for doing flex fuel. So many people I see go straight E85. I wonder why they'd do that to themselves unless it's an either/or situation for a particular brand of car.
Nice! I need to do this for my stinger, I’ve been going off what everyone else does for E30 which is 3.5 gallons of e, rest 93. But not all gas is equal. It’s been running strong, but still, would be nice to know.
no more strut bar for you also maybe you can find a place holder in the fusebox that gets voltage only when the car is on
Thank you very much for Video. I am very interesting to watch and learn from all your Videos. VERY GOOD JOB AND PROFESSIONAL 👍 A+.
ur a beast man u definitely make wanna diy… i tried ny carbon wheel abd i struggled the 19 up were different im uoset so in gonna have to figure something up. im buying logo today
Thanks man I do try lol. Make sure your battery is disconnected when you do.
Hey bro I’m trying to go E85 as well..
So my question is once I install this can I stay on 91 and will my car run fine until I can get it tuned? Or what do I need bro?
Hey I just bought my q50 rn I’m just learning before I do anything to my q50 my question is when I buy all this parts and install it does the car has to get tune in order for it to work or do I just have to I installed it? Second question is do I gotta empty the fuel tank and put e85? Before I Install it?
I got ama flex kit but when I got to connect on fuel it app it says no devices found have skmeone had same issue
Do you think this fuel kit is as reliable as the ams? Flex fuel kit ? Is ams more expensive just because of the brand name?
This video is out dated. I can’t compare as things have improved
Did you just squeeze that last fuel line clip and pull on the line? I can't figure if I'm supposed to pull the line while squeezing or pull everything including the clip up while squeezing. Taking a break cuz it's exhausting going elbow deep into that engine bay
1:45 it is a fuel damper for injection noise not a fuel regulator the fuel regulator is inside tank
Yes I’m aware. An easy mistake to make making these videos.
Can u do a DIY for this and the high/low pressure fuel pump for the Vq37VHR? ty
Vhr doesn’t have a high pressure fuel pump. Just a lower and it’s very simple to swap
how do you have it connected to your ECU?
Did yours give you results right away? I finally finished connecting mine and the only thing the app does is say connect or disconnect. Gonna have to give fuel it a call because that's not working and I also had to buy an o ring for the filter cuz the one they had on was leaking fuel all over
@@EnthusiastPOV thx. mine must be faulty. At least I got the fuel line changed, but this whole project has been a pain in the ass. I'm hoping changing that fuel line was the worst of it
Where did you put the white wire ?
Read the instructions lol. Pin #60 on the ecu
@@EnthusiastPOV 😂😂I found it a month ago
Did anyone else’s fuel-it kit come with a white wire with a pin??
Was there anything else you needed to buy to install the flex fuel kit on the passenger side?
Whatever is in this video this is it.
By removing the gas cap you are depressurizing the tank, not the fuel lines. Without a Consult tool a fuse needs to be pulled in the IPDM and the vehicle started until it stalls followed by a few more cranks to relieve the fuel pressure.
For those that don't have the service manual the procedure can be found in the AMS HPFP installation instructions. www.amsperformance.com/wp-content/uploads/bsk-pdf-manager/Infiniti_Alpha_HPFP_V2_108.pdf
Thank you for the video. Keep them coming.
Hey man i rum amaoil 5w european 40 on my q50
@Enthusiast POV what up brother hope everything is going well. Question does this kit with the filter allow you to run full e85?
Why is your install different from zillafullboost
I was one of the first to put this up. These videos are 3-4 years old now.
Also he has a 3.7z
Does this kit work with ecutek
Hey can I use this on my Q50 3.7
Why was your fuel at E14? Were you experimenting with E85 blends or is your local gas above the usual "Up to 10% Ethanol"?
@@EnthusiastPOV interesting. I plan to make a video this week of me testing the 93 Octane at my local pump as well for some folks on Facebook that needed a visual on how I use my tester kit. I'll check back in to tell you what my 93 tests at. Appreciate your vids
No wiring shown?
?
yo pov i know im bugging but can u hook me up with s z1 hoodie big dawg please 🙏