how to make wireless power transfer project || Science project
Вставка
- Опубліковано 4 чер 2023
- #wireless #power #transfer #wirelesspowertransfer #tesla
Business inquires
E-mail : skynetrobotics123@gmail.com
Connect With Skynet Robotics
Facebook: / skynetroboticspage
Instagram: / skynetrobotics
For Ready Made Electronics projects Message me on WhatsApp
+919075800409
WARNING:
This video is for demonstration and education purpose only. Each demonstration presents risk and hazards that must be fully understood before attempting. And should be performed only by professionals.
By Skynet Robotics #skynetrobotics
Avinash Sonawane
In this video tutorial of wireless power transfer project you will learn how to make wireless power transmission.
wireless power transfer is trending science project.People always search how to make wireless energy transfer project on Internet.
wireless power transmission used in smartphone wireless charging.
To make wireless power transmission project you need following components.
0.5mm Enameled copper wire
(You can use 0.3 to 0.6mm wire)
2N2222A transistor
22K to 28K resistor
LED
9V battery with cap
To make wireless power transfer system for different divices this video is very useful.wireless project is award winning school project. My Next video topic is how to make wireless charger or wireless power transfer system.
wireless power transmission invented by nikola tesla. Tesla coil is example of wireless power
transfer system.
#scienceproject #scienceexperiments - Наука та технологія
Thank you Bhai soo much thanks how can I greet you outstanding it works fluently ❤❤❤❤ once again thank you so muchhhhhhj ❤❤❤❤❤
@@SujataBharati-ir9xd 🙏❤
You are superb bro 👍
What other transistors can we use to replace the one shown in the video?
Thanks bro
Good
Supeb, made with much finishing.
Thank you! Cheers!
Bro, if I made 30 coils in both copper wires will it work, what will be the length for total copper wire to be perchased from shop
What other tool can I use to connect the transistor with the copper wire?
simple experiments electromagnetic induction
Thank you very much my friend for sharing, it helped me in my classes with my students
❤👍thanks it will motivate me to make content like this
it work thx :)
Thank you soo much dude it's working thankss
Enjoy
Sir, how to make 12v wireless transmission send mi a diagram
Will it work on 10K resistor
Kya 0.5 mm ka copper wire lagega... Usse kam mm ka nahi hoga?
Can u tell Me the materials used
What is the size of the cupper wire used or how many mm² is it?
0.25mm
Bhai first comment and veiwer
Dear friend this is not wireless transmission but wirless electromagnetic induction. There is no capacitors in either set, transmitter and receiver. The natural resonance frequency is also very high in MHz but it is very weak. If you measure the inductance of both coils and calculate for a right capacitor for both module resonating at the same resonant frequency, then the range will be very good, several feet. Try it. Thanks for sharing electromagnetic induction transfer. Oh another idea: if you wind the same coil on a ferite rod or put a ferite rod, it will increase electromagnetic field and may work within several inches. Chao.
No, you are wrong. It is a WPT - Wireless power transmission ok
what is the name of the tool he's used to connect the wires?
What do i do if I don't have that wire jointing heating machine? Can i joint it with tape?? And I've made 25 turns is it okay ? And also I've 2222A transistor and not 2n2222A transistor? Will it work?
Yes u can give direct join but make sure proper contact has been made.
Give turn as shown in video to desire results
i ordederd 2n2222a transistor but 2n222 came so can i use 2n2222 with 27k resistor ?
Yes
If Transistor-1726, can the bulb light up?
Thanks Bhaiii ❤ Aapki Video Ki Wajh se Mera Complete Ho Gyaa Kyunki Mai 1 galti kr raha thaaa😅
👍
Kya galti thi Mera baan nahi raha😢plz tell me kya pata meri bhi wahi galti ho
Haa batana bhai kya galti kri aapne
Haa batana bhai kya galti kri aap e
Haa batana bhai kya galti kri aapne
Super Bhai
Thnx
I have one more doubt, can I use thin wires instead of the thickness shown in your video ?
Yes definitely
What if I give only 25 turns
Will it work
Sir, in relation to it's output of power can we transfer higher voltages such 5 volts?
Not tried yet I will find solution
Sir I use 2N2222 transistor and 27k resistance with 9 volt battery but it glow only 2-3 time and transistor getting hot and next time it is not glowing... One thing can we use 3.7 volt lithium battery.....
Yes
I made this and I'm using CTP N 2222A LS and a 27 k resistor with insulated copper wire and 9v battery but the led (red colour)bulb is not glowing/turning on please help for this
Wire gauge?
@@skynet-robotics I made it I was connecting wire from wrong side btw thank you
Nice
Can i use any number transistor and resistor
Nhi
is a transistor neccesary or will it work without one?
Yes
What is the substance you used for joining the LED with thw wire
It's soldering
Hey ,can you please tell me if i can use 0.35 mm copper wire)
Yes,
Sir i use 23 guage wire and used all the circuit components you mentioned but still led is not lightning up, could you help me in resolving the issue
34guage
Hi, can I use a 12 power supply instead of battery? I have created the same thing but it doesn't seem to work.
Yes
What is the diameter of coil
Any diameter
can someone explain this please quick as i have the presentation tmrw and i don’t understand it
Hi did you get an explanation yet? If you did can you please explain it to me?
If we use higher voltage battery, then can we get the light more brighter?
No it will burnt out transistor
Okay, so can we use the coil with more turns to magnify the brightness of the led light?
Please suggest any way so
that the brightness of the led light is enhanced ...
Or what we can do so that the led light glows at a far distance from the other coil?
Is it okay if we use any insulated copper wire?
Yes but guez should less than 28
Sir I have transistor of MPs2222AM730 but it is heating up
Resister value??
Can it work with 22kohm resister or from lower than it like 10kohm??
22k ok but not less than it
@@skynet-robotics many videos are doing it in 10kohm and 2N222A how's this possible?
@@projjwaldhamala1822 in this video guez of wire is more than 36
If u r using less than 22k then it starts heating
Okayyy thanks mate.
Can we use 2n2222A transistor and 15 k resistor
Yes you can try
Jo coil aapne banai hai uska diameter kya liya hai aapne
Ya diameter matter nahi karta kitna bhi le lo
6cm
Ok
Bhai me trangitor aur ragitor kaha se lau kaha pr milega
Tv Wale ki dukaan par
Can we use 24 gauge?
U can but the transistor will get heat
Best option use more than 28 for desire results
I have made 32 turns will it glow, can we use
electric tape in place of the soldering device. Also the resistor i used is 27k will that be alright
Yes
I used the same but it emitted smoke near the transistor resistor joint@@skynet-robotics
What is the diameter of wire
above 0.5mm@@skynet-robotics
Can it work if you use higher resistance?like 100ohms?
Ohm or kohm
@@skynet-robotics you cant see or what he clearly mentioned ohm
Can we use 547 B transistor
And 15 k resistor ??
No
Can u send the the list of materials my son is so crazy about this proyect and he wants to do this project for school
The wire gauge
Or a less the exact materials that u use
2n2222a transistor
32k resistor
34 guaze enameled copper wire
9v battery
5mm led
Thanks alot for reply
How frequency is generated in this how emf is induced there is no changing magnetic field then how it works
That's what I am confused bro, like transistor doesn't switch on or off automatically, or what I don't know, i search online and chatgpt, nothing shows up. Did you find the answer :) ?
@@Dee-kr9mp yeah I find it out using chatgpt it's that the copper wire works as an inductor. So the transistor and inductor makes an oscillator which is called colpitts oscillator. which generate emf which induces magnetic field in the another coil.
@@SreesaiAk Thanks for the reply, I would be helpful for my college project 😊
@@Dee-kr9mp yeah 👍
What is the length of wire
30 feet
can you please explain how it works
Mutual induction
Can we do this project for class 11
Yes
C2330 transistor wil work or not broo.?
Plz reply
BC547 gives desire results
C2330 -no
Bro what is the length of the wire
20meter
maine permanent connectiona nhi bnaya but tape use kra h prr abhi bhi bulb glow nhi ho rha h
Insulation coat nikala kya wire ka
Will it work with 2N2222 resistor?😢
Yes
Thank you Bhai 😀, I am doing this for my science exhibition
@@skybase4019 kya aapne bana lia and aapke ye work bhi kar raha ha kya and please tell me
27 gauge ka bana skte?
Ha lekin heat karega transistor
Can I use 34 gauze wire ??
Yes
Sir, in this video you use small box to round wire
Can I use a marker to round wire
Can we make small wore rounds like a spring
What will be diameter
I booted it with 1K resistor and 2N2222 transistor but it is not working, what should I do for this?
Plzzz help me🙏
Use 22k to 27k value resister
@@skynet-robotics brother thank you very much 😇
Can I use bc 547
No
Can u please give an explaination for this project
Mutual induction
Mutual induction needs AC current where is ac@@skynet-robotics
Transister or resister ka kitna price hoga
10 transistor
5 resister
Can i ues other transister
Which one?
Bc 547
Can i use it with 12 v lithium ion battery??
Yes
@@skynet-robotics Okay thanks for answering me 😊
Wire kitne no. ki h
34 gz
If not working try using two battery in perellal connection
Y not working? I did exactly as u shown...plz tell wat cud be wrong
Check Connection again
It's working properly
Which Transister u hv used npn or pnp?
I don't know pnp or npn
Which has to be used?
Npn
Can I know which it is without multimeter?
What is the wire galue number please tell me🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
34
I made the same circuit it works BUt the transistor is overheating and finally it burns. Do you have any idea why , i amusing a 2N2222 and a 20K resistor.
Use more than 27k resisiter
Sir I have made all but light is not blowing
Yes
But u hv to cover that joint by tape
@@skynet-robotics which joint sir
Sir ye konsa topic pr h
Wireless electricity transfer
Bhaiya Maine banaya but Mera receiver ban nhi rha hai led kaunsa lu aur kaise joint Karu copper wire se 😔😔😔😔 maine yah apne science project ke liye banaya tha but work nhi kar rha hai resistor maine 20k aur transistor maine 2N2222A aur Battery 9V ki use ki hai mere se kaha glati ho rhi hai please bata dijiye
Photo bhejo Instagram par
@skynetrobotics
@@skynet-robotics hello ?
Where you get transitor
Electric store
I'm using 15k resistance and 547b transistor but try many times light glow 2-3 times only and transistor is too heated 🙄
Use More than 27k
It's true or not
True
What is the thickness of copper wire???
34guz
I made one but the components were ; 32 gauge wire, 547B transistor, 15k resistance, and turns on each coil were 30, but the transistor is heating up and led is not turning on can you pleas tell how to fix this?
Use more than 22k resister
@@skynet-robotics okay i will use 22k resistor but the existing bc547 will work or i have to use 2N222A transistor?
@@skynet-robotics okay i will change the resisitor but do i also need to use 2n222 transisitor or bc547 will only work?
@@rajupoppy97462N222 TRANSISTOR!
Brother how can i increase the distance between them? Like if i want to make them work between a 30cm distance what do i have to to??
bhai mera nahi ho raha hai
Npn transistor used?
yes this is npn transistor
Gu7
CIRCUT DIAGRAM PLEASE ?
I hv shown in Video
If Transistor-1726, can the bulb light up?
If Transistor-1726, can the bulb light up?
Yes