how do you have the Esteps in the screen? I've updated the printer and the screen and still in my settings I don't have half the options you do. thanks
FLSUN SR can be changed to close-range direct extrusion, which can better print soft materials such as TPU. Our DM1 (you can buy 10M6V2M6 screws and ASPINA motors for F1), but the current setting must be modified, otherwise the motor will be burned. Please consult OMGEXTRD official website customer service for specific setting methods.
If you want the tensioner the other way round so the filament runs at a way less angle than placing the other way round. All you need to do is reverse the red and blue wires in the connector plug. His wires are not swapped so he must of done it via the firmware and re flashed it.
@@HarboringMotivation Drill it out i had to do it to mine. try not to drill into the shaft like i did. FLSUN like to blue lock tight everything. even if you drill into the shaft it wont effect the new gear. GOOD LUCK!
how do you have the Esteps in the screen? I've updated the printer and the screen and still in my settings I don't have half the options you do. thanks
FLSUN SR can be changed to close-range direct extrusion, which can better print soft materials such as TPU. Our DM1 (you can buy 10M6V2M6 screws and ASPINA motors for F1), but the current setting must be modified, otherwise the motor will be burned. Please consult OMGEXTRD official website customer service for specific setting methods.
Thanks for the tutorial! You seem to be using a modified firmware version, could you provide a link for it please? :)
flsun3d.com/pages/sr-firmware
SR Firmware V1.4
@@omgextrd Oh I didn't realize the new update included those new features, thanks :)
flsun3d.com/pages/sr-firmware
SR Firmware V1.4
Updating this firmware version.
mine is running in reverse, how do I fix that?
Please contact the official website technical customer service.
in the video he put the extruder mounting plate backwards, just turn it 180 so the push tensioner is facing the bracket.
If you want the tensioner the other way round so the filament runs at a way less angle than placing the other way round.
All you need to do is reverse the red and blue wires in the connector plug. His wires are not swapped so he must of done
it via the firmware and re flashed it.
My motor gear screw will not come out...
@@HarboringMotivation Drill it out i had to do it to mine. try not to drill into the shaft like i did. FLSUN like to blue lock tight everything. even if you drill into the shaft it wont effect the new gear. GOOD LUCK!