Fix for Standing Desk that Won't Go Up
Вставка
- Опубліковано 15 вер 2024
- If you have a standing desk that will only go down slowly. Run it all the way down and it will likely come back to fully functioning! Motorized standing desks can sometimes go into a limp mode if the controller loses sync with one or both of the motors.
Related Videos: Herman Miller Standing Desk Motor Controller Replacement • Herman Miller Standing...
What!?! My desk has been stuck in the down position for over a year. I just saw this video. Put it all the way down like you mentioned and Viola! It works again! THANK YOU!
Same thing just happened to me
😂😂😂 happened to me as well 😅
same I can't believe this actually worked lol
Give him an award!!! my desk just started to go up after following your instructions.
I can’t believe it. My standing desk is now working, who would have known it was such an easy fix. 🙌🏽
Oh my god... I found a standing desk in my building's garbage room that only went down, so I assumed the remote was broken. I ordered a new remote and it STILL only went down. Watched this video and it seems I never needed to order that new remote! Thank you for taking the time to address this!
Dang!! This 1 min video saved me 100 of $s. I have 2 desks that just stopped going up. I was almost convinced to replace the Motor. Thank you so much brother!
!!! Oh… my…🎉 this worked!!!
Thank you so much. I was very upset when it wouldn’t go back up and I was scared to put it all the way down thinking it would just be stuck. But I saw your video and crossed my fingers!
Thank you!!!!!!! You rock 🎉🎉🎉
Same here! 😊
Same here!!!
Lifesaver!! It actually worked when I was scared to go all the way down and get stuck there! Thanks so much
Thanks! This was my problem, desk goes down but not up, thought I had some switch or controller problem but found your video and suggestion to go all the way down to reset.
Perfect!
No problem! I discovered that quirk while working on the desk and thought, “surely this will happen to someone else.” Glad it was helpful!
Jeez my wife’s electric table similar to this one just stopped working.. she said if I fix it i’d be the best husband forever!!😂 I stumbled upon your video and right infront of her eyes, i did what you said and IT WORKED!!! Im her hero thanks to you my friend!!
Thank you very much. I was frustrated and was desperately checking the cords and cables before I watched this video. I wish I saw this earlier.
Holy crap. I was plugging and unplugging, switching extension cords and doing every “reasonable” thing. I saw this video and thought to myself this couldn’t possibly work…I was happy to be proven wrong this fixed my issue immediately, Thank you!
Thank you!!! I felt physically ill a moment ago thinking i had broken my desk
I freaked out majorly but this actually worked! I was afraid if I brought it all the way down it'd never go back up THANK YOU!!
It worked !! Thank you so much bro :)
Thank you so much it’s been week and I come across this video and it’s really helpful.
Thank you for your video. I thought I’d have to change the motor but you’ve saved me from doing that 🎉❤
We have had the same problem just like this. Tank you very much for the Tip, it is solved now! It really helped us out!
2 years on and this works 🤣🤣 I was worried my table was a write off. Can’t believe that worked !
You’re my hero of the day. Thank you for taking the time to post this video! 🙏🏼🙌🏼
Thank you so much! This worked, I was worried I would have to replace the motor or desk
Most welcome! Happy to help!
Thanks Bro! Greetings from Poland!
Wow, absolute amazing video, thank you so much for the help! Fixed it in no time!
Bro you are a life saver, i was ready to throw this one out
Thanks you so much I was fighting with this problem for some couple hours
Thanks brother, My three table is stock from last 1 year, and it's kind of so funny 🤣🤣🤣 That I just need to press all the way down 😂😂😂
I can't believe it worked!! thank you so much.
Thank you so much for this video! I was also worried of getting it stuck down :) All fixed now!
Dude! Who's close to do an unknown brother a favour. Get this dude a beer. This is the solution all this time? Did it and my desk is back moving again - 5 seconds fix 😄. Thank you! thank you!! thank you!!!
100% bang on the money!!! Saved me so much time buddy 👏
Thank you for making this video!!! Simple fix that totally worked!
Thanks so much I was so worried, thinking I needed to return it 😅
You’re welcome 😊
Thank you so much! I thought I was going to need to have it repaired! Worked right away!
my Lshape desk is stuck at bottom and wont budge. I have tried everything from resting to power off-on, etc. Any suggestions. it makes noise but doesnt do anything else. Thanks
Thanks so much, I can now raise my desk up 🙂
I will never be able to thank you enough- you saved my life (and my neck)
Thank you so much for posting this - first video I saw on the issue and it worked!
Wow I can't thank you enough. This just got me out of a hole at work.
Jesus! This is super helpful. Although I'm using a different brand, it finally worked.
Thank you so much my guy!! You saved me from one hell of a headache
Bro o thought I have to get my warranty cards and thing but u saved my time thanks❤
It worked!! I was soooo stressed about it! Thank you!!
Many thanks!!! I was about ready to buy a new one!
OMG THANK YOU SO MUCH!! Such an easy fix
Bro thank you so much i hope nothing but happiness comes your way
You are a life saver I thought I had to replace the HCB107A-1
Best video ever - it works! Thank you so much!
THANK YOU! I WAS SO SCARED I BROKE MY DESK! 😭😭😭
This is absolute genius!! my table works again
Thank you so much for this! Worked like a charm
Thank you so much. Your video helped lot. 😀
what a quick fix - it worked!!!! Thank you!
Life saver!! Tbh I was almost sending it back. Damn! You made it so simple
It worked! Thanks so much!! 😊
DUDE THANK YOU SO MUCH!!! This helped a lot!
Just so you know, your a life saver.
You are amazing man!!, really your tip helped. Thanks
OMG , you are awesome bro finally my desk back to life ♥♥ thanks bro
IT WORKED! Thank you so much for this tip 😭🙏
Had to trust the other comments because I too was scared to do this and have it get stuck but IT WORKED!!!!
I’m soooo happy it’s been months since it worked thank you soooo much omg ❤
I was ready to buy new parts but that fixed it. Good video 💯
Thanks you. Worked like a charm
It actually worked, thank you so much ❤
Thank you for this! My desk was stuck in the down position as well.
Thank you it’s just worked for me 🔥 appreciate it man
thank you, quick and simple
Thank you man! this actually worked!!
Thank you so much for posting this! So simple...like magic :)
*What if the desk it's stuck up? My desk it's stuck up even If I unplugged it and tried to reset it doesn't work either.*
I’ve not encountered that before, but I have an idea or two. Does it make any noise when you push up or down?
@@Cotz95 Thank you for the reply. It's doesn't make any noise regards on your question. What I think it's the power adapter it's not working anymore.
Holy shit I was going insane & this fixed it in 1 second 😂
I won't lie, when the down button was working but not the up, I panicked. I didn't want my desk to get stuck any lower. But... this worked. Whoa.
Thank you, it was so easy also for me. 🙏
OMG
Thank you so much! It's so simple and it works! 👍
thank you it worked you are a beast !!!!
You are a legend
This fixed my issue!
wow it worked for me as well, thanks a lot.
DUDE YOU SAVE MY LIFEEEEEEEE
thank you so much i got mine a bit ago and was so scared thx so much
Thank you!
Amazing thank you for this video!!!
This is helpful but my desk problem is that my desk is stuck at max height and won't go down idk what to do
Unfortunately I haven’t encountered that yet 🤔 Have you tried unplugging it for a few minutes and plugging it back in? Alternatively it’s always a good idea to check all the connections. I’ve got another video on replacing the controller that shows how to access those
ua-cam.com/video/nDakZatOvoA/v-deo.html
Thank you
Thanks a lot ! It worked for me
What if my desk was going up then the right side collapsed. Would putting it down all the way work?
been looking everywhere since mine only goes up and not down,cant find even one vid about this problem
THANK YOU!!!!!!!!
Thanks
Omg!! It Actually workssss 😍
Wow thank you!
BROOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO I LOVEEEEEEEEEEEE YOUUUUUUUUUUUUUUU
thank you!!!
Perfect! Thank youuuuu
Thank you so much!!
thank you soooooo much!!!!!!!!❤
THANKS BRO!!!!!
life saver
Saved my day. Mine was only going up when the down arrow is pressed. So I let it go all the way up. And then it starts to work as it should.
🔥🔥🔥 Thank you! 🎉
Worked... magic thaks