Nissan 370z H&R spacers and extended stud install
Вставка
- Опубліковано 5 вер 2024
- Here we have another install DIY for H&R spacers and extended studs, if you guys have any questions leave it in the comment section, don't forget to like, rate, and subscribe!
I have the Z1 20mm spacers and I’ve went to 3 shops and they quoted me 300$ up to 1000+$ to have these installed. Thanks for this video
how long did it take to ship and get to you
Nick m boutta 2 weeks
hey when you installed those 20mm are you still using stock rims and oem lugs ?
@@slwg37s no , vossen rims and vossen lugs
Well done video, helped me understand what needed to be done before I started. I'm in the process of installing H&R wheel spacers (DRS) with extended studs on my 97 Infiniti I30T, uses same thread type as your Z. I'm doing 20mm in Rear & 15mm in Front.
Some additional problems I ran into that others should prepare for/additional preperation:
-The rear studs were to long to fit into hub so I had to cut a notch for them in my dust shield to get them into the hub.
-All my lug studs were very rusty and they did not bang out on a few tries. You will need to get extra Nuts before starting because you will have to bang on them hard and nuts will flatten.
-You will need a air compressor, air impact wrench, impact sockets to do this job at home.
thanks for the additional info man!
Wow, Aaron,, you are one of the better spoken UA-camrs. Your video was very well done and I didn't have to put up with large amounts of camera shake. You explained what you were doing and then showed it without adding a lot of blather in your comments (that is really a good thing).
Bruce Skinner thanks for the compliments man!
Aaron Huck. did not know you had a channel. i need to do this on my 350z with a 12mm. with bimmers i did not have to do this, so its good to see the jdm world hasn't changed much. hope you finally meet you in one of our meet @ Zcfl. Thanks for the video
glad I could help man! If you run into any problems shoot me a message and I'll try to help. If for some reason you can't tackle it let me know, we can work out a deal and I'll do it for ya at my place :)
great video. thanks for the upload!
Thanks for the great video. Makes this upcoming task a bit less daunting.
HustleHabit once you get used to the steps it's super easy!
So how long are the extended studs cuz I was given the spacers but not the longer studs that come with them
Same as yours 15mm and 20mm
What size wheel studs you use in the front?
Z1 says the brakes dont need to be removed to tackle extended studs due to the recess on the back. What say you?
Good video! thanks. Were did you get the calipers?
I have no idea how your extended stud just slid right in.. mine just rubs against the Knuckle and has too much angle so it won’t slide in.
Were your studs on the riffled part thicker than the studs before?
Are the extended stud needed ? Or it's just recommended
Rico Cartel if you're doing spacers for your wheels, or if you're getting wheels with aggressive offsets, the extended studs are highly recommended. you want a safe amount of threads to grab onto so your wheels don't come off at high speed cornering.
i got an 1997 towncar and i bought these spokes for the car and i need larger studs or bolts finding them online is a hassel is it possible for me to just get spacers with extended studs or bolts ???
yes. Google towncar bolt on spacers
I saw another video that said you need to have washer on the back studs is that true
Not in my experience with the 350/370/G35/G37 platform. It may be different for other vehicles
is there a reason why you went with extended wheel studs and spacers rather then adapters
Garvel Joseph the spacers with the studs built into them can introduce another point of possible failure due to adding another structural weakness. this particular customer wanted to be able to do track days and it's not advised to do track days on spacers with the studs built in to them.
Great video! Was the extended studs a package deal with the spacers?
thanks man! yes they came together from H&R
May I know the overall length of the extended studs?
Hi! I'm looking into getting the same setup, are you lowered or stock height? Would 15mm front / 20mm rear work if ever I dropped mine with swift springs?
Hey bro did you dropped it on swift??
Perfeito!
alexandre farias thanks!
Way too much trouble. That's why they sell spacers with bolts already attached.
Length of the stud ?
I want some spacers for my '11 but don't want to end undue stress to the axles/ hubs, what are some long term downsides of running spacers?
The Fulcrum only what you've mentioned above although if you're not taking the car to the track then I wouldn't worry about it too much. I know plenty of people who have had spacers on for years with no problems.