Thanks for the Tear down: just what I need to see - not so familiar with the DETAIL of the great Welger knotter. Mmm 2mm clearance less 4.5 turns = mm compression from Bolt tpi !
FWIW, ALL balers are near enough the same : whether Shaft or chain drives. Just start from front edge of plunger ( knife edge or slot ) and drive FORWARDS. get Intake feed timed, then go to Needles after tripping. I no longer keep the figures in my head, but any baler book should give a GUIDE for starters. Hope it helps
Thanks for the Tear down: just what I need to see - not so familiar with the DETAIL of the great Welger knotter. Mmm 2mm clearance less 4.5 turns = mm compression from Bolt tpi !
Hi, Can you tell please price of old knotter with came
Size of knotter shaft in mm
Hi there
Have you got a video of timing a welgar 4000 baler please,Nigel
FWIW, ALL balers are near enough the same : whether Shaft or chain drives. Just start from front edge of plunger ( knife edge or slot ) and drive FORWARDS. get Intake feed timed, then go to Needles after tripping. I no longer keep the figures in my head, but any baler book should give a GUIDE for starters. Hope it helps