If you let go of stereotypes, your level will go up./ 3 wood processing methods/Woodworking DIY
Вставка
- Опубліковано 30 вер 2024
- These are three know-hows for processing large surfaces.
The table saw operation direction can also be done from the side. However, you need to adjust the height little by little to use it.
▶Business inquiries: rlatjdbf@gmail.com
▶Facebook: / woodworkingno1
▶Instagram: / wood.no1
If you go buy a table saw to do this watch that finger! I've known 3 masters that are missing it!
^^^ what is this guy on? Anyways, yeah it just takes a momentary slip of the mind and boom no more finger nub. It costs A LOT to reattach. Like 25k, although I could be wrong.
@Praise Jesus, Repent or Likewise Perish your comment reminds me of a guy at Lakewood church, I was a member of the most elite Christian Biker group, wearing my vest in the church restroom, I'm standing at the urinal pisding and he walks up to me trying to hand me a Christian tract. I'm like dude "I'm a Holy Ghost Christian at church on Wednesday night, you supposed to do that out in the highways and hedges. He got on me like you probably will that being in church doesn't make you a Christian. I'd say typing Scripture that doesn't have anything to do with the subject maybe, sometimes, maybe every now and then, possibly turns people, (people who have been hurt by religion) off. I don't mean to be rude but I am responding to your posting the best I can
Definitely helps that he has a SawStop Table saw.
@@gumecindogarcia1070 I saw the comment and thought maybe he was saying to turn to Jesus in case someone took a finger off and blead to death, lol. Buy yeah, otherwise pretty random and ineffective for most non-believers.
Most missing finger stories are table saw accidents.
Why remove the riving knife at 0:28? The top of the riving knife should be below the crown of the blade and it should not interfere with the cuts you made.
I was wondering the same thing. No harm it’s not a through cut, but I’d still leave it on.
@@brian454454 While riving knives are most important for through-rip cuts, they do offer some kickback protection during any cut. One would have especially been important during the second cutting operation shown in this video (2:57), when a rip was made. A riving knife would help protect the user from kickback that may be caused by that non-through kerf closing upon the blade.... I'm not the safety police. If he doesn't want to use it, that's his decision and I won't nag him for it. I just thought it was strange that he took the time to remove it and I wondered why that was.
You don't need a knife for this job and it gets in the way.
Thank you! I thought same thing but I couldn't REALLY recall all the times it was critical vs detrimental... however it seemed like it wouldn't have hurt on any of his applications.
I must've learned SMTHN during all those hrs watching your vids ; ) 👍
@@StumpyNubs diffrent countries diffrent safety regulations, as a german trained cabinetmaker and joiner we were taught that the only cut that is allowed with out a riving knive is an undercover cut. But we probably have the strictest guidelines 🙄
A secret for getting perfect depth laps on the table saw (using technique 1 and a scrap of the same thickness) - Raise the blade and make a cut at the very end of the board. Flip it over and take another cut leaving a tiny tenon behind. Keep raising the blade slightly, taking a cut on both sides. When the cut finally takes off the thin bit left behind it is the perfect depth.
I’ll do that. Cheers.
No annoying music, no talking, plenty of info, beautiful shots, masterful work.
I approve of this comment
Just annoying sped up audio
Make sure you buy and have the proper blade before doing this. They are harder to find than you think. They are called flat top or square blades. I had to order one online as all 3 hardware stores did not carry them. They are nice though.
Plane it with the blade like they do at 1:40 but be really careful not to stick ur hand in the blade.
Strong agreement! I recently tried doing this kind of cut with an ATB blade - mistake! It removed the wood just fine, and quickly, but left lots of ridges. It took another couple of hours of plane & chisel work to make it all flat & smooth.
⁰
FLAT TOP BLADES ARE AS EASY AS GOING TO AMAZON.... LOCAL STORES ARE HISTORY NOW !!!!!!!
In my experience as a union carpenter, cabinet maker and woodworker hobbyist for 35+ years. I’ve found that to get the proper tools that perform on the level that the video shows. I buy my tools from tool distributors, not Home Depot or similar box stores or hardware stores. Tool distributors sell commercial grade tools, the chains and box stores do not. Online look for Rockler, Veritas, Granger, woodworkers warehouse. Good luck.
У нас в России каждый ПТУшник такое исполнить может,давай что нибудь посложнее
😁😆😆
" If You Let Go Of Stereotypes, Your Level Will Go Up"
A Piece Of Life Wisdom That Goes Far Beyond Just Woodworking 😏
Yes, that is true😊😊👍👍
@Praise Jesus, Repent or Likewise Perish ratio
I hope safety is not stereotyping. Please don’t let that go by removing the riving knife. The riving knife doesn’t interfere with any of the operation in this video.
@@iknowgamingikg4025 well that didn't work
@@ipick4fun27 if you know what the riving knife is for then you should understand why removing it isn't an issue
Using the rip fence and crosscut slide at the same time is advanced saw work. If you get a bind things are flying out of the back of the saw at hi speed. I wouldn’t want to be in the way or have to patch the hole in the wall.
I think because in this case there weren’t any off cuts, it’s reasonably safe? I would still hesitate to do it, but the waste is all sawdust so I think the risk of a bind is very low.
You should only use both when making non-through cuts like cutting a rabbet or dado.
My bet is I have 10x the time on a saw as you. Most of the stories from people with missing fingers start out the same as yours…
Let the pros handle that process, my fave way of doing tenons.
@@robslifting4life - lol-
I have hammers older than you.
I have worked on some pretty famous buildings. I have built the best of the best.
I still have all my fingers.
And things happen on a table saw faster than you can think.
I am saying don’t do it.
Put a stop block on the fence. But don’t cut with the board on both.
It works fine until it doesn’t.
Un taglio con la circolare, poi con il bindello...
First choice would be band saw but if you only have a table saw then why not! It obviously works!
I recommend a table saw rather than a band saw.
Another vote for the bandsaw here.
Could've just used the skillzall.
Фрезерные станки запрещены по религиозным соображениям? Нелепейшие способы производственных извращений, бесконечно далёкие от реального производства. И обработка торцов максимально идиотским способом, делающим невозможным соблюдения заданных размеров изделия
на 4:45 руки немощные прижать фрезер или увеличь площадку чтобы удобнее было прижимать. Всё равно на 5:22 когда делал ты проход с краю вильнул фрезером. И стамеской всё равно резанул край на 5:43.
This type of channel is exactly what I look for when I’m looking for wood working tips and instruction. Showing multiple ways of achieving the same result, basically using what you have at your disposal to accomplish the task at hand. I subscribed and liked the video before I even finished watching it.
Just be more careful than this guy is.. there are so many safety rules being broken here.. never touch the blade of a saw while it's plugged in, never grip the router by the base... and never pull out a piece of wood from the table saw in the same direction the blade is spinning.. safety first out there. Machinery is not your friend and it will bite you the first chance it gets. don't give it that chance.
not to mention he has to riving knife on his table saw.. it's only table saw safety device that actually does it job. the riving knife alone will save you from 75 of the stupid things you can do on a table saw.
You have to remove the knife for the technique he showed, and lots of other techniques such as running a dado. It’s perfectly fine to remove it under the correct circumstances.
@@randazzoworld8940 fair enough habits to promote and remember but keep in mind this guy knows a bit of what he’s doing.
The table saw he’s using is a SawStop tablesaw. It literally can’t come on when he’s touching the blade, or for 5-10 seconds after. There is a safety trip function in the switch. He would know this and feel perfectly safe touching the blade. That being said: you should always unplug your saw when changing blades and NOT touching the blade is still safer habit to keep. As most shops won’t have the SawStop saw.
As for the router many small palm routers like his have finger grooves molded into the base, and it helps keep the router from wobbling. It’s very hard to control with only one hand. The only thing he did that I wouldn’t have was place his finger under the still running router to showcase the gap there… I cringed a bit.
As for pulling the work stock from the blade backwards, you are correct that it’s bad practice, but again, the techniques he’s using somewhat force this method. If the operator is careful, skilled, and practiced, it can be done with relative safety.
Is still a great video, and earned a sub here!
Great safety concerns explained. Thank you all. My guess is video intent is to demo the different possible approaches.
Excelente, sempre com conteúdos, aprendi uns truques com o amigo, fabuloso essa ideia!
Abraço aqui do Brasil 🇧🇷
obrigado por assistir
Not to be a buzzkill, but you put your finger pretty far under the base of a spinning router @4:41 😰
В этом видео прекрасно всё, особенно красивые и идеальные досочки.
Спасибо за просмотр
Спасибо что делитесь опытом, мне как новичку было очень полезно это видео
Спасибо за просмотр
Вредно оно тебе, как новичку
디테일한 작업에 많은 정성과 노력이 있었음이 엿보입니다. 창의적이고 센스있으십니다. 영상을 보는 것만으로도 기분이 좋습니다.
감사합니다😊😊
Now this is great woodworking video👍 I just subscribed!!
thank you for subscribing👍
5:28
I love that you showed how you left a ridge to keep the router level meanwhile, and then knocked it off!!! Beautiful!!
👍😁
That was my favorite tip in this video! I love router techniques, they can be as helpful as they are satisfying to watch!
I don't even wood work. I just subscribed because of his high quality skills haha
Thank you very much.😊😊😊
How to cut three oversized inaccurate lap joints.
I never do any carpenting. I dont even know the name of the tool. But it was good recommendation, I watched it all.
Thank you for watching.
Fingers waiting to be lost. Practice counting in Octal.
I've just watched 2 of his videos and smashed the subscribe button...looking forward to watching lots more!
Subscribers are precious.
Thank you for being a valuable person.👍👍
سلام دوست هنرمند من،بی نظیر بود کار شما،همیشه موفق باشید👏👏
😁متشکرم. روز خوبی داشته باشید.
If you spend 20000 $ on equipment, you can glue two pieces of wood ;)
I've built barn doors with my cordless makita trim saw and a garage sale chisel. I guess people would rather watch a video series than actually build, not over build simple stuff. Of course in Texas we compete with guys that have probably never used a power tool until they came here
Бля с таким инструментом как нехер делать. Всегда удивляли эти видео как с крутым инструментом сделать простую фигню
Ça a toujours l’air si simple quand ce sont des " gens de métier " avec des années d’expérience et du matériel pro ... 😍
Excellent video and techniques!
Cheers from London England 👍🏴
Здравствуйте. Благодарю за видео, у вас очень качественный контент. Подскажите, пожалуйста, какое масло вы используете? И, правильно я понимаю, что вы работаете только с дубом? Если нет, то подскажите какое масло для других пород используете. Буду очень вам благодарен за помощь, как начинающий совету мастера.
Master said in another video comment that he uses linseed oil & tung oil...
😎👍☘️🍺
@@peterfitzpatrick7032 Bro, thank you so much! 🙏🥳🥳🥳
Brilliant!
Thanks for sharing these tricks
thank you for watching
I appreciate that you use an appropriate amount of glue and not just drowning the wood in it.
So many ways to skin a cat but yet us mortals still manage to constantly screw it up! 🤣
Beautiful work, doesn't matter how its done, as long as it works in the end! 🤙
The second technique where he rips into the wood then flips it over to get the other side, will produce a lap that is 1/2 of the saw blade width too thin on each piece. The resulting lap will be 1 full saw blade thickness too thin.
Yet you saw that it came out perfectly so you must be wrong or he cheated and used special effects or deceptive editing.
It's the former, you're wrong. You're ignoring two facts:
he first lined up the side of the saw blade with the line he made on the timber so the first two cuts are to the required width exactly
when he flipped the timber over he adjusted his fence to align the existing cut with blade
He reset the fence
Does anyone know what that tool was called that he used to mark a perfect line along the side of the board? I need to get one.
Marking gauge
@@lectricdolphin7265 thank you
Awesome, now for the next 500 boards on my living room floor
How to lose body parts in 3 easy steps
Could you use a trim router bit for the last part?
Если по русски , то название ролика будет звучать так:. " Голь на выдумку хитра! "
Судя по оборудованию, здесь далеко не "Голь". А приёмы работ самые обычные, знакомы каждому столяру. Хотя снято хорошо.
@@ВикторЖен
Это циркулярка там " оборудование "?????
Amazing video, amazing craftsmanship!!
1метод очень облегчяет изделие угловых соеденений
So it doesn’t matter what tool you use, as long as it does the job, you’re using the tool correctly? Sir I like the way you think. I’m taking this knowledge to college.
Why do you scratch it lightly with your square when you are dry fitting it?
I imagine that was to demonstrate that the fit is tight and flush.
@@Lawrence330 thanks I was also looking for this
Hammer sound has a new channel WOODWORKING PROJECTS YOU CAN COMPLETE WITH ONLY 9 FINGERS
Eline yüregine sağlık olsun süpersin👍👍👍👍👍👍👍
teşekkür ederim👍😊
1:07 the forbidden chocolate cookie
목재가 무슨나무인가요?
Будто посмотрел извращения с пилой.Долго,неэффективно,с какими-то ещё псевдополезными самоделками.Глупо и непрактично.И в чем цель чего видео тогда?
Закрепить на столе перевернутую фрезу. Таким способ удобнее на мой взгляд воспользоваться. Только фиксация фрезы заняла некоторое время.
Why are you doing all of these complex methods when in the end cutting off all the carefully crafted parts that are still there and just glueing it together?
With every new method I was in expectation of some method of beautiful wood joinery and then you cut it all off...now I'm a bit sad. Sad for the elaborate work and effort you put in this to show us and then you just cut it all off and do some simple act of glueing two plain pieces together. I recognise your expertise but what you did here with it, I unfortunately find that to be very disappointing.
На фрезерный стол не накопил? Использовать таким образом имеющееся оборудование надо быть либо отсталым, либо только вчера начать заниматься обработкой, т.к. минимум эффективности при максимуме затрат, одним словом бред.
Если купиш такои аппарат
Method 2 and 3 were horseshit. Slower, more complicated, and capable of getting misaligned.
I'm trying to figure out what stereotypes he is referring to?
Most of these are just common sense.
The using the table saw sideways is not a good idea, as it pits stresses on the blade in a way it was not designed for this may cause your blade to break.
The tiling router is again using the tool wrong, your not supposed to push down on the side without support, and well you saw the result. Most woodworkers don't have this issue. However, if they do need to prevent it they can simple place a support jig under the unsupported side.
The rest of this is just using the tool as intended. Nothing novel there.
These are really cool, but a lot of these techniques aren't necessary. A good handsaw and chisel will accomplish all of these tasks. It seems a lot harder at first but with a little practice its really quite quick. I find the best use of a table saw is for make lots of repeated cuts accurately. Not necessarily for joinery.
A master of lateral thinking. 👍
0:37 Wow, went just a little OVERBOARD with those hash marks, didn't you
J'ai pas de scie sur table mais j'ai un routeur, j'ai beaucoup appris dans cette vidéo merci 👍👨🦽💨
Merci d'avoir regardé
Какой-то криворуко.
Впрочем, идея формировать соединение "в лапу" с помощью фрезеровки - свежая)))
If you are gong to be now UA-cam maybe you should use a hand cream for wood works. I work with wood every day and I have had bad weeks where they dry out but DAMN!
Cool video. Confusing title though.
What does this have to do with stereotypes? Or was that just clickbait?
Ничего выдающегося не увидел. Обычный уровень самоучки. Уж извини, брат.
Wish I saw this earlier than last month before making many of the same mistakes… thanks for showing corrections
#4. If you want real precision, learn machining and get a Bridgeport mill.....
There was absolutely no reason to remove the riving knife, and then to use the crosscut with the workpiece directly against the fence tells me you don't want your fingers and you want beginners learning from you to lose theirs too.
The first two methods are dangerous and should not be attempted unless you want hurt if the wood catches the blade. The second one especially will will get you in the nuts whereas the first one will probably only damage some fingers.
Сначала думал херня будет, но с момента когда оставил ступеньки для фрезера - это было оч круто.
Лайкос заслуженный
Вы правы херня полная.
Мне с начала показалось херня полная...
Пригляделся,нет...не показалось 😂😂😂
Why take out the riving knife? It shouldn't get in the way, even for non-through cuts.
Stereotypes exist because there is truth in them.
They're not absolute truths and shouldn't be treated as such.
But they are a good reference point to start from.
So that's how you use the router
I often mess it up like how you shown it at first and even if I didn't, it has an uneven surface that I just have to sand or chisel it by hand
Видео для тех, кто вообще в столярном деле ничего не понимает. Даже для среднего столяра не открыл америку.
Спасибо, но зачем все эти действия? Фрезой можно сделать всё хорошо.
I like the part where you stuck your finger into the groove next to a spinning router blade.
I love this video.
It addresses my biggest pet peeve on wood working videos
I get really frustrated when I see someone use a single table saw blade to chip away a dado cut and then waste lots of time to chisel and maybe even sand that dado cut smooth.
I prefer to take extra time to use a router table as I can make a pass on the table saw, then move it to a separately set up router table. I feel I get a much better dado cut and the fit is much more secure.
But I also saw a few ideas I will try for the table saw.
So long as I don't waste lots of time chiseling the jagged table saw cuts away.
This video isn’t about the tools you do have, but about the tools you maybe just don’t have.
@@firewing1319 exactly. Not everyone has all the tools and this video shows a variety of methods to cut dado.
how can one let go of sterotypes when they live around them, each day a reminder?
Hmmm...
Das ist alles Nichts neues und im Grunde pure Logik. Aber Ok, für Einsteiger vollkommen in Ordnung...
-------
this is nothing new and basically pure logic. But ok, perfectly fine for beginners.
Most of these techniques are dangerous, and would be better/faster if done with other tools.
Run a razor line before sawing off the ends so you dont chip out those edges like that!
Two words: dado set.
а у меня нет ни циркулярки, ни фрезера
😢😢😢
Dado blades will work in both a table saw and a radial arm saw, and could be done quicker.
Some times keeping ur own rules and morals rain over what u think is a stereo type.
This guy is absolutely talent-free 😂🤷♂️
Ето всеволиш два способа,ещё можна с помощью торцовки.
So much time, energy and noise for the simplest joinery.
The stereotype busted. We’re seeing more than one method gets desired result.
Nice, though I wouldn't feel comfortable doing some of the table saw techniques used, I'd worry about pinching and kickback. Still, always good to remember there are many ways to skin a cat, so you can always have your pick of the ways that seem best, just keeping in mind there's more than one.
someone in this thread mentioned they are using a specific blade. flat top saw blade maybe?
If you let go of your powertools addiction, your level will go up.
My butt puckered up when he stuck his finger near the router bit. 4:42
Play at 0.5 speed for the video to play normally instead of sped up
sliding the board across the blade to clear the half-lap joints is called “SNURFING”
well….that’s what i call it
Thank you for good information.
Мне кажется или всё это можно сделать нааа много проще?
You make drawing the lines look easy. Im still in practice mode
OK... so, seven minutes of how to make a lap joint...
Outstanding craftsmanship 👍👍👍👍👍
thank you
If you had gone around the perimeter first with the router method, it would have simplyfied and de-risked the chisel clean up finlsh too ;-)
Thank You for this video.very nicely done even without narration. These are great techniques which I will start using. Will make these joints easier and faster as well as more accurate. Greetings from Maine.
Thank you for watching.
I am cheering for you.👍👍👍
Страшно смотреть, не люблю циркулярки...