Of course you had to be Indian, you guys are awesome in this cad, cam, cae thing and also as teachers, i understood everything and i don 't speak english very well, best regards from Mexico.
thank you so much sir.....the simulation parts are not covered in the syllabus of any solidworks courses. Keep on sharing such videos. After doing simple videos, please do some difficult simulations so one can learn thoroughly. Please cover all the parts in the simulation module. Thank you.
sir maine aapki kafi video dekhi hai, aap koi live class bhe arrange kar dejye , kam se kam hum log apne guru ko dekh to lenge isi bahane. aap ka ashirwad mil jyega.
the tutorial is good, especially since u can sing too. the B on my piano is dead sadly and cant get the full beauty of this whole tutorial, so im gonna start scrummbling my brain to transpose to a different key
i dont mean to be so offtopic but does anyone know of a tool to get back into an instagram account..? I was dumb lost my password. I appreciate any tricks you can offer me!
thank u so much sir for making vedios for simulation and others of solidworks so I learned a lot of things from ur lecturer and i like ur way of communication .
Hi i am watching your videos for a long time i need your help. can you show me how to do rubber drop or impact test on solidworks I'll be thankful to you for this ☺️
Good sharing. Hi sir. How to determine the max load before the beam break down? The results show maximum & minimum for stress, strain & displacement only.
Compare the maximum stress to the yield stress of your material. After a simulation is run, if the maximum stress is less than the yield stress of the material, the beam will not break. An engineer will usually make sure the maximum stress is at most half as much as the yield stress in real world scenarios. For the material in the video, the yield strength is listed as 460 MPa and the maximum stress is listed as 28.17 MPa, so the part will not fail (factor of safety is about 16, or max stress is about one sixteenth the yield stress). Typically, an engineer will be designing a part for a specific purpose (for example, they could be designing a bridge) and therefore know the load that will be applied to that part (the bridge must not break when it's full of cars, which weigh x much and therefore apply y force to the pavement). Therefore, the SolidWorks interface is built to allow you to input that load and see the resulting stress. As far as I know, the only way to input a stress and see the resulting load is to iterate static simulations with different applied loads to approach the desired stress manually. There might be a way to have the software do it, but I haven't been able to find that functionality if it exists. Hope this helps
Sir can you upload full solidworks simulation (fea analysis) videos. (Static analysis, buckling analysis, thermal analysis, dynamic analysis, motion analysis, non linear, drop test, pressure vessel analysis etc.)
I don't know what I would do without Indian Solidworks tutorials on youtube. Thanks always from the US
The power of globalization, lad
😍🔥
Huh word
Of course you had to be Indian, you guys are awesome in this cad, cam, cae thing and also as teachers, i understood everything and i don 't speak english very well, best regards from Mexico.
This is the best channel for Solidworks
I can believe you go so deep with this program you are a great teacher!
soon i will start simulation series & we will learn about all the things related to Simulation,
thank you so much sir.....the simulation parts are not covered in the syllabus of any solidworks courses. Keep on sharing such videos. After doing simple videos, please do some difficult simulations so one can learn thoroughly. Please cover all the parts in the simulation module. Thank you.
Arun Kumar Thanks Soon i will start full series of Solidworks Simulation,
Please add more simulations
hello,i am student of mechnical engineer and i so glad to meet and speak with another mechnacal engineer
Excellent teaching . If possible than add more simulations tutorial
Thanks bro. You saved my life. I was working on my final project this video was the one I needed. Thanks again
Excellent video! Simple, straight to the point and very useful!
of course you are the best teacher in my entire life.
nice work man it's like a 1h introduction just in 9 min ♥
This is the best for beginners.
You’re not just a god. You’re actually a huge temple❤️ big thumbs up for the support
sir maine aapki kafi video dekhi hai, aap koi live class bhe arrange kar dejye , kam se kam hum log apne guru ko dekh to lenge isi bahane. aap ka ashirwad mil jyega.
Random Indian UA-cam tutorials. Saving my ass for over a decade.
Now I am in love with #solid works.. And the way you explains.. Awesome 🎉🎉
Sabes que llegaste al nivel de experto cuando los únicos temas que encuentras están en este idioma.
Pretty well explained. A good example of SolidWorks simulation. Thank you for posting such instructional content !
the tutorial is good, especially since u can sing too. the B on my piano is dead sadly and cant get the full beauty of this whole tutorial, so im gonna start scrummbling my brain to transpose to a different key
You are the best!!! Thank you so much. You make it so easy to follow😃👍
great tutorial, thank you - just did my very first SW simulation :-D
Excellent educational video. Many thanks, Please upload more of this type videos.
My first time to enjoy Soliworks 😁😁👏🏽👏🏽👏🏽Congrats for your good tuto
なんて言ってるかは全然わからんかったけど、やり方はわかりました！ありがとうございます☺︎
Thank you sir for easily cover the simulation module.
Talented sir you are Talented 🥰
best video. very easy to understand
Great teacher... thank you alot sir
Excellent teacher brother.
Sir it's really helpful videos. I learn solidworks more and more .. Thank you so much sir ..
Thanks! I'm used to doing stress analysis using Ansys nice to to see it on solidworks !
i dont mean to be so offtopic but does anyone know of a tool to get back into an instagram account..?
I was dumb lost my password. I appreciate any tricks you can offer me!
Sure i like this tutorial
Thanks for your effort and sharing of information
Excellent teaching
You're always a big help! thank you ❤
Many people Sells the same things but some Great Teachers do it for Free ^o^
Sir please make tutorial for thermal study in simulation
Good job,,,,, it was most helpful,,,
Nice presentation!
Very good explaining
Thank you for the video.
Could you please, show how to understand results of such an analysis?
Thanks for the detailed and helpful explanation
Great tutorial!
thank you so much for the tutorial!
. sir iwould like to thank you because i learnt lots of things from you . I hope to explain the flow simulation
mohamed mostafa Thank you so much :) i will try my level best.
sir I want to send to you picture of my work to tell me about my level in solid work if it possible
please sir make a tutorial on full analysis of chassis. it will be very helpful as your tutorials are very much easy to understand
I am Krishna I am your Chanel one of the subscribers I need how to 6 MTR length ladder how to apply UD load please make one vedieo sir
Thankyou - very helpful
thank u so much sir for making vedios for simulation and others of solidworks so I learned a lot of things from ur lecturer and i like ur way of communication .
Thanks for the help!
Excellent introduction mate, thank you.
do you have any video for self weight analyis
Does solidworks 2016 have simulation?
Awesomeness
good very good
great job sir 🙌👌
Can you please make a video on drop test? And Is CFD available on solidworks?
Thank you sir ❤️
Nice video
Hello. What is
yours and which country you are from? And now where are you studying. I
thank you for the good training you teach. I'm happy to answer.
Hameed Etemadi Hi i am from India & i am working in Saudiarab, Solidworks is smaller part of my work,
you are mechanical engineer? right?
Great video, it helps me a lot
Plzzz explain what is the use of contact set virtual wall in simulation
Hiii, we will be designing morphing wing structure, what’s best to study with regards to that in solidworks simulation? Thank youu
Sir please make video on braided hose
Thank you. It's good to know how to split Face to calculate force for some area.
Thanks for this nice tutorial
VERY HELPFULL THANK YOU VERY MUCH
Hi i am watching your videos for a long time i need your help. can you show me how to do rubber drop or impact test on solidworks I'll be thankful to you for this ☺️
Please do a series on Steel Structure Simulation in Solidworks
Soon i will start a Simulation series,
include simulation with assembly
can you please help me
i want to assemble a cpu for ansys Simulation what would be the configuration in low price
Please make one video for udl load apply nonlinear analysis please sir
you great thank you
Thank you so much..really helping..thumbs up!
Sir can u write an algorithm so that the whole FEA analysis process is done automatically?
Thank you sir, it was really helpful
Sir can you make an flow simulation tutorial...I haven't used that yet and I find your methods and tutorials quite good
Thanks
Thanks so much
thankyou keling
Thank you, Sir, for this video. It was very helpful.
Good sharing. Hi sir. How to determine the max load before the beam break down? The results show maximum & minimum for stress, strain & displacement only.
Compare the maximum stress to the yield stress of your material. After a simulation is run, if the maximum stress is less than the yield stress of the material, the beam will not break. An engineer will usually make sure the maximum stress is at most half as much as the yield stress in real world scenarios. For the material in the video, the yield strength is listed as 460 MPa and the maximum stress is listed as 28.17 MPa, so the part will not fail (factor of safety is about 16, or max stress is about one sixteenth the yield stress).
Typically, an engineer will be designing a part for a specific purpose (for example, they could be designing a bridge) and therefore know the load that will be applied to that part (the bridge must not break when it's full of cars, which weigh x much and therefore apply y force to the pavement). Therefore, the SolidWorks interface is built to allow you to input that load and see the resulting stress. As far as I know, the only way to input a stress and see the resulting load is to iterate static simulations with different applied loads to approach the desired stress manually. There might be a way to have the software do it, but I haven't been able to find that functionality if it exists. Hope this helps
Hi guys, if the max Von Mises stress is less than the yield strength, so it means the part is safe to use under the load right?
Thank you very much, sir!!!
What about shear forces is it included in stress
Great . Keep going
Thanks,
needed more content and detaileed expanation on simulation
Very Interesting teaching. Your institute available in Hyderabad. Address please.
Great vidio make the shark and movement in tail and locomotion
Sir, parts ki assembly karne ke baad analysis kese karte hai. For example drone wale tutorial ka analysis.plzz Sir reply karna
thank you so much god bless you
Hi guys, if the max Von Mises stress is less than the yield strength, so it means the part is safe to use under the load right?
THANKS
Now a days which is best software to learn for mechanical student?
is it count finite element analysis? thanks
thank u soo much...….very helpful
Super
Dear sir, can you tell me how to simulate this model but two part connect by weldment
Bravo👍
are all the simulation studies saved automatically with the part?
Thank you, sir.
i want to learn about motion study sir may i take yur help for this
I have a question
How do you select the proper beam for this if it fails ?
Sir can you upload full solidworks simulation (fea analysis) videos. (Static analysis, buckling analysis, thermal analysis, dynamic analysis, motion analysis, non linear, drop test, pressure vessel analysis etc.)