EASY Logic Level Shifter ESP32 Setup Guide: WLED Tutorial. 3.3v to 5v
Вставка
- Опубліковано 6 чер 2024
- 🛒AMAZON’s BEST DEALS (updated daily): bit.ly/3VWZKVS
🚨AliExpress’s BEST DEALS (updated daily): bit.ly/3VwoaDW
☑️Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher
ESP32 Module: amzn.to/3XceAbQ
Logic Level Shifter: amzn.to/45iEkFx
5v 10a Power Supply: amzn.to/3Kzfyri
Domestic Automation Plug n Play Controller: amzn.to/3Reaxbi (same power supply as above)
5v LED Strips WS2812B: amzn.to/4eefLOk or AliExpress: bit.ly/3x7RLLW
5v LED Strips Sk6812: amzn.to/3VuwHsu or AliExpress: bit.ly/4aUMzZw
Wago Connectors In-line: amzn.to/4bOTTY6
Wago Connectors 5 slot: amzn.to/3yZ8uS4
Wire Stripper: amzn.to/4edwZLx
Red 18awg Silicone Wires: amzn.to/4eelfIy
White 18awg Silicone Wires: amzn.to/4ebLVd0
Green 18awg Silicone Wires: amzn.to/4c8Qh30
Breadboard Jumper Wires Male to Female: amzn.to/3wXhJ4T
Breadboard Jumper Wires Female to Female: amzn.to/3z12ZST
Breadboard Jumper Wires Male to Male: amzn.to/3yZmZ8p
Soldering Equipment:
Kester Solder: amzn.to/3r6smMA
Tip Cleaner: amzn.to/4bNcFiU
Soldering Iron: amzn.to/3BKMlWv OR amzn.to/3jxx1mB
Solder Smoker Absorber: amzn.to/3Kx6K4T OR amzn.to/3rbHCYp
Helping Hands: amzn.to/3v19YG3
Relevant Videos:
Soldering for Beginners:
Setting up WLED on ESP32 for Beginners: • 2024 - How to Set Up A...
Domestic Automation WLED Controller Setup: • NEW WLED Sound Reactiv...
The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher
ESP32 Module: amzn.to/3XceAbQ
Logic Level Shifter: amzn.to/45iEkFx
5v 10a Power Supply: amzn.to/3Kzfyri
Domestic Automation Plug n Play Controller: amzn.to/3Reaxbi (same power supply as above)
5v LED Strips WS2812B: amzn.to/4eefLOk or AliExpress: bit.ly/3x7RLLW
5v LED Strips Sk6812: amzn.to/3VuwHsu or AliExpress: bit.ly/4aUMzZw
Wago Connectors In-line: amzn.to/4bOTTY6
Wago Connectors 5 slot: amzn.to/3yZ8uS4
Wire Stripper: amzn.to/4edwZLx
Red 18awg Silicone Wires: amzn.to/4eelfIy
White 18awg Silicone Wires: amzn.to/4ebLVd0
Green 18awg Silicone Wires: amzn.to/4c8Qh30
Breadboard Jumper Wires Male to Female: amzn.to/3wXhJ4T
Breadboard Jumper Wires Female to Female: amzn.to/3z12ZST
Breadboard Jumper Wires Male to Male: amzn.to/3yZmZ8p
Soldering Equipment:
Kester Solder: amzn.to/3r6smMA
Tip Cleaner: amzn.to/4bNcFiU
Soldering Iron: amzn.to/3BKMlWv OR amzn.to/3jxx1mB
Solder Smoker Absorber: amzn.to/3Kx6K4T OR amzn.to/3rbHCYp
Helping Hands: amzn.to/3v19YG3
Relevant Videos:
Soldering for Beginners:
Setting up WLED on ESP32 for Beginners: ua-cam.com/video/exAWzMfmwQ8/v-deo.html
Domestic Automation WLED Controller Setup: ua-cam.com/video/QmMwrOUB_kw/v-deo.html
The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
Hey Chris, I get the same result with a sacrificial led though many experts do not recommend it.
Why is using a shifter better? Safer, more stable or just more elegant?
Please elaborate, I don't wanna burn my house down. Thanks
Have yourself a great weekend Chris.
I really recommend you choose a different wire that is UL listed. Long LED strips can draw a lot of current and are at risk for fire if not using quality conductors. Especially if you are planning to hide these wires behind walls.
I can smell the comments saying that this is not the correct level shifter
I2C vs TTL. It’s a raging debate!
Indeed. I have tried the bidirectional logic level converters and these give may too much noise or can't handle the data speeds.
Once I switched it for any TTL chip it was gone but I still needed to add a filter capacitor to the TTL to make the signal stable.
Because it is ;) A simple TTL buffer/and/or gate (maybe with hysteresis) would do way better and easier as no 3V3 needs to be connected
Awesome like a Possum!! I bought a crap ton of those Logic Level Shifters over a year ago and never understood what they do or how to wire them. Now I do! Thank you Jesus Man!!! ⛪
Thank you Chris.
cool video - what the max length and size of wire to run from logic shifter to WS's led strip?
Had the same issue last night on my SK6812 strip and after putting a 270 ohm resistor, the flickering was gone. Didn't need a resistor on my WS2813 strip tho.
What extra distance do you think this will extend the data?
Hey, Chris Got a request Would you mind making a video about the govee app. I've got a sports bar I installed 20 plus light strips on two music boxes and none at govee can help.They are brain dead at customer support the app is very confusing and I like to put it on a timer Plz Help!?@!
The other thing I bought some of the tape lights you recommended to use with the W led app box and none of it had any glue on the back . Who does that? I ordered 3 different sets and none of them had anything on the back. Id that like a special option i forgot to check on the order
How can I get ws2812b led strip in India at best price
What if you were using a 12V or 24V power supply?
I am having many problems powering the esp32 with a regulator from the 24v psu. Lots of flickering with a 3 cm data wire
You might need a buck converter then. Or a separate 5V power supply.
love your tutorials, what do you think about the LLS method vs sacrificial 1st LED?
I used the sacrificial pixel last year for a Burning Man project. I had the data line split 4 times and the run on each LED line was 35'+ and it worked perfectly. My online research returned you could run 100' without issue but I did not test that so can not verify. But like I said it worked splitting the data line 4 times to runs over 35 feet. Plus WLED has in the settings, a box to click, to turn off First Pixel for this reason. Hope this helps!
So I have a microphone that currently uses the 3.3v on my ESP32. Can I power the microphone off the 3.3v side of the level shifter? Anyone advise on this please?Newbie 😊
Anyone?
Is not possible to install wled on type c esp32 board
From WLED, “Currently (as of summer 2023) only the microcontrollers from Espressif, types ESP8266 and ESP32 (with dual core) are fully supported. Some of the newer types like ESP32-C3, ESP32-S2 and ESP32-S3 are experimentally supported, but productive use is not recommended yet because some bugs are suspected.”
@@markc.5750 type c USB CABLE
what a waste of wagos,, that first inline wago killed me
I also use wagos like they came in a big box. Which they did. They look so sad just lying in there. They seem to be much happier when connected! 😊
Joking aside, I frequently rebuild my lighting stuff. Wagos make it easier.
I’ll give him the benefit of the doubt since this is for demonstration purposes and not a final installation.