I have this bookmarked to use in my Introductory Shop Classes in Middle School. Nicely organized, his language is simple and well understood and he keeps it interesting for all age groups. I even learned a thing or two and I have three college degrees.
Thank you for making this in detail video. I've watched it over and over again. I am applying for a maintenance job and can never get the tool names right.
That's a nice introduction to tools. A full coverage of hand tools would be more like 10,000 hours long, though. Just hammers come in more variety than all of those tools combined. I saw a lever tool there that wasn't described, a common crowbar. I know many variations on just that tool. Rip chisel, cats paw, pry bar, digging bar, spike tool, nail puller, peavy, log jack,etc. I didn't see any cutting tools beyond drills, either. Never stop learning. The more you learn, the more you realize how much there is that you don't know.
I don't have a lot of metric tools but Allen keys I like since 20 % of the time it actually fits better becuz of wear, indicating it's time to order a new fastener.
The counter sinking tool is for making countersinks to accept certain types of screw heads. It can be used to deburr, but that is not it's design function
I've used most of the tools discribed in the video,but didn't always call them by their proper name,or know their proper usage. This video,and Robert do a great job explaining that. Thanks again!
Generally speaking, a very good primer on the various hand tools available and how they work. Three comments, however: What you refer to as a "pull handle", however, is almost exclusively referred to as a "breaker bar" by the rest of us. I've not heard it referred to as a pull handle, although it's a reasonable name for it. I was about to berate you for using the term "orientate", which I discovered IS a word, although most people use the variants "orientation" or "to orient (something)" instead. I've always used the latter two when speaking or writing. Perhaps it's a regional thing; I've not heard it used much here in the Western U.S. When I first started buying tools in the 70s and 80s, there were basically two types of point counts on sockets: 6-point and 12-point. I opted for 12 point at the time, because ratcheting mechanisms had between 20 and perhaps 36 teeth, which is a long distance between clicks. The 12-point sockets allowed me to orient the socket and the ratchet more favorably when working in tight or restricted spaces. The 12-point also worked with more types of fasteners; I could use them on 4-, 6- and 12-point fasteners interchangeably, whereas a 6-point only fit on a 6-point fastener. That all changed when we got higher tooth counts on our ratchets (now as high as 120), and again when 12-point fasteners became prevalent in cars. Obviously, there are very few 4-point fasteners these days, and 6-point sockets continue to deliver torque more reliably w/o rounding over nuts and bolts as often as a 12-point will.
anyone know a site or a book i could look at to learn standard tool usage/measurements? i am new to tools and am having a heck of a time finding anything on standard tool usage.
Hi! I'm a Brazilian and I liked the video because.I'm a Mechanical Technician that I work in a plataform oil so It's very useful to me to undestand well English in my area of work.
very informative video. However, my only piece of criticism is you jumped from imperial measurements to metric measurements at 14:39. For a beginner in engineering like me, that can sometimes be confusing. Thank you for the video though, it's a great help.
You left out pincer pliers. Good for pulling out nails, breaking off ceramic tiles. Also left out snips for sheet metal. Good vid though - nice summary of tools.
North Perth Plumbers are using complete tools to absolutely cater all plumbing problems. The video shows everythng we need for our perfect plumbing services.
I'm here for esl (english as a second language). My issue is to be sure the correct way of speaking things and their uses. Example: a hammer is used to beat or it's used for beating...? I realize the instructor sometimes says either one. Could someone help me on that?
@@UCIMedia thanks. I've searched for other answers and my conclusion is: "We use a hammer to beat". The hammer is the object of the sentence Whilst ""The hammer is used for beating". The hammer now is the subject. This is according Oxford Advanced Lerarners dicionary
In a 120 volt single phase system (Typical Home power) One wire Black is "Hot" White is "Neutral" Green is "Ground". for 220 the Red is "Hot" four wire
+Jacktagon Gaming {TA} You Americans Know how to use your tools!In Britain our teacher doesn't even teach us the names of the tools and still expects us to know them for our GCSEs!!!!!
if you lose the key the chuck and the drill are no good !!!! apparently we can't get a chuck key of the same size.... people if you lose the key send me the drill...lmao
Or go get me a Cherry Pepsi. That's also being brand specific. Or bring me a Dr. Pepper, that too is also being brand specific. Or when I say bring me a #0 Phillips Screwdriver, that is not brand specific.
Pepsi is not a coke. Soda would be a correct term. If you said Pepsi Cola then thats correct. But Pepsi Coke is not right. LoL. Thanks for explaining the tools btw. I just needed to get it out regarding the pepsi coke thing
The three hardest to remember for me are (1) crescent wrench which is actually a adjustable wrench (2) biscripts which are actually locking pliers (3) channel locks which are actually slipped joint pliers. A also tend to call a cross driver a Philips and and flat driver a flat head screwdriver. Good video but he should have covered snips because there are all kinds and are a fundamental tool in any work shop.
To me this is old school teaching, it works for my way of learning. Thank you.
Thank you....husband passed away before telling me what all the tools in his workshop were for. Very helpful.
Thanks Mr Smitty, I learned a couple of things from this video.
Much appreciated.
I have this bookmarked to use in my Introductory Shop Classes in Middle School. Nicely organized, his language is simple and well understood and he keeps it interesting for all age groups. I even learned a thing or two and I have three college degrees.
How those cor tool work?
three college degrees and you write like that? yikes
Thank you for making this in detail video. I've watched it over and over again. I am applying for a maintenance job and can never get the tool names right.
Thank you for your video! it has been very useful for someone starting to learn when I help my dad in the garage
Thanks, I learned some new tool names today, and will be watching again to make sure I don't forget.
Thanks for the crash course! Learned few tools new to me.
“and you EHH! for the locking mechanism” 😂
ITS A BEAM TYPE TORQUE WRENCH
Thanks for sharing you knowledge... :)
Sir your accent is so satisfying to listen to, I miss the south though.
Greetings from Brazil
That's a nice introduction to tools. A full coverage of hand tools would be more like 10,000 hours long, though. Just hammers come in more variety than all of those tools combined. I saw a lever tool there that wasn't described, a common crowbar. I know many variations on just that tool. Rip chisel, cats paw, pry bar, digging bar, spike tool, nail puller, peavy, log jack,etc. I didn't see any cutting tools beyond drills, either.
Never stop learning. The more you learn, the more you realize how much there is that you don't know.
I don't have a lot of metric tools but Allen keys I like since 20 % of the time it actually fits better becuz of wear, indicating it's time to order a new fastener.
great demonstration Mr. Kearsley
Thank you so much for sharing your knowledge.
SOOO helpful for this mom! Really appreciate the explanations!
Great videos, sir. Thanks for sharing.
I really like their way of teaching!
Thanks for sharing your valuable knowledge and experience.
Thank you very much. Interesting,informative and useful
The counter sinking tool is for making countersinks to accept certain types of screw heads. It can be used to deburr, but that is not it's design function
I've used most of the tools discribed in the video,but didn't always call them by their proper name,or know their proper usage. This video,and Robert do a great job explaining that. Thanks again!
seems like something that hank hill would watch
thank you very much good information regarding hand tools
Very clear Robert!
Thank you so much, this is exactly the video I was looking for, much appreciation! :) Great job!
Thanks for teaching me u r a great techer
very helpful video. thank you sir. god bless
Excellent training- thank you!
Generally speaking, a very good primer on the various hand tools available and how they work. Three comments, however: What you refer to as a "pull handle", however, is almost exclusively referred to as a "breaker bar" by the rest of us. I've not heard it referred to as a pull handle, although it's a reasonable name for it. I was about to berate you for using the term "orientate", which I discovered IS a word, although most people use the variants "orientation" or "to orient (something)" instead. I've always used the latter two when speaking or writing. Perhaps it's a regional thing; I've not heard it used much here in the Western U.S. When I first started buying tools in the 70s and 80s, there were basically two types of point counts on sockets: 6-point and 12-point. I opted for 12 point at the time, because ratcheting mechanisms had between 20 and perhaps 36 teeth, which is a long distance between clicks. The 12-point sockets allowed me to orient the socket and the ratchet more favorably when working in tight or restricted spaces. The 12-point also worked with more types of fasteners; I could use them on 4-, 6- and 12-point fasteners interchangeably, whereas a 6-point only fit on a 6-point fastener. That all changed when we got higher tooth counts on our ratchets (now as high as 120), and again when 12-point fasteners became prevalent in cars. Obviously, there are very few 4-point fasteners these days, and 6-point sockets continue to deliver torque more reliably w/o rounding over nuts and bolts as often as a 12-point will.
anyone know a site or a book i could look at to learn standard tool usage/measurements? i am new to tools and am having a heck of a time finding anything on standard tool usage.
Jordan Parker casilla book or workshop notes by casillas
army field manuals might be useful, ive seen a few on machine tools, might be stuff out there on hand tools too
Drills is being fed ex'd to you LMAO.
Great video it helped a lot thank you !!!
Thank you sir,I did learn something .
great vids. thanks for sharing your knowlege with us.
12 years is a long time ago, I was 4 when you said the comment
Thank you for teaching me I think I got an a on my test now
Hi! I'm a Brazilian and I liked the video because.I'm a Mechanical Technician that I work in a plataform oil so It's very useful to me to undestand well English in my area of work.
Good information 💓💜💚💜
information overload
This is what I’ve been looking for. I’m in 8th grade starting principles of manufacturing
Thanks I needed this video t learn it right
Perfect crash course. Just what I needed!
learning ，thanks Mr Smitty.
Wow this is very helpfull for learning thanks you
This video really helpful to me
Thanks for sharing your videos
very informative video. However, my only piece of criticism is you jumped from imperial measurements to metric measurements at 14:39. For a beginner in engineering like me, that can sometimes be confusing. Thank you for the video though, it's a great help.
I really like ur band the cure
Pretty cool video
You left out pincer pliers. Good for pulling out nails, breaking off ceramic tiles. Also left out snips for sheet metal. Good vid though - nice summary of tools.
very informative.. thanks
Very good video with great information. Thank you. Machete approves
North Perth Plumbers are using complete tools to absolutely cater all plumbing problems. The video shows everythng we need for our perfect plumbing services.
great video
очень понятно
good ol smitty
30:35 I'm surprised he didn't call them "tongue and groove" pliers. Hmmm...
I'm here for esl (english as a second language). My issue is to be sure the correct way of speaking things and their uses. Example: a hammer is used to beat or it's used for beating...?
I realize the instructor sometimes says either one. Could someone help me on that?
Either one is correct in that example. However, you would not want to say "a hammer is used to beating" or "a hammer is used for beat".
@@UCIMedia thanks. I've searched for other answers and my conclusion is:
"We use a hammer to beat". The hammer is the object of the sentence
Whilst ""The hammer is used for beating". The hammer now is the subject.
This is according Oxford Advanced Lerarners dicionary
@@luckenglishguitar440 Exactly right. Good luck with your learning!
11:10 it is a TORX. TORQ looks like a bit like a swastika
I love how the yanks never talk about the "Square Head" or correctly called "Robertson Head" screw.
Why, it was invented by Canadians :-)
In a 120 volt single phase system (Typical Home power) One wire Black is "Hot" White is "Neutral" Green is "Ground".
for 220 the Red is "Hot" four wire
BRAVO
Anyone else here for tech?
yep
+Jacktagon Gaming {TA} You Americans Know how to use your tools!In Britain our teacher doesn't even teach us the names of the tools and still expects us to know them for our GCSEs!!!!!
Yes
Jojo
👍👍👍🔨🔧
if you lose the key the chuck and the drill are no good !!!! apparently we can't get a chuck key of the same size.... people if you lose the key send me the drill...lmao
And I am sure you love us, now send your mom over she loves us as well, I will love her long time.
All yank call it Coke or Cola...
anyone else here from a school assignment
no, well maybe my homeworks is gonna be 31 years late...
No, my father never taught me this before he passed
Or go get me a Cherry Pepsi. That's also being brand specific. Or bring me a Dr. Pepper, that too is also being brand specific. Or when I say bring me a #0 Phillips Screwdriver, that is not brand specific.
big daddy cain
Thankyou :)
Pepsi is not a coke. Soda would be a correct term. If you said Pepsi Cola then thats correct. But Pepsi Coke is not right. LoL. Thanks for explaining the tools btw. I just needed to get it out regarding the pepsi coke thing
Thanks for video / instrumenti.lv
Hello Mr Smith
Thats some nice tools
yes
Ooo😂😂😂😂
Your response wasn't cleverer, sweetie.
2:11
a rivet gun
The three hardest to remember for me are (1) crescent wrench which is actually a adjustable wrench (2) biscripts which are actually locking pliers (3) channel locks which are actually slipped joint pliers. A also tend to call a cross driver a Philips and and flat driver a flat head screwdriver. Good video but he should have covered snips because there are all kinds and are a fundamental tool in any work shop.
Yeah thats what we call them you have a problem with that ?
Playback at 1.5. Thank me later
M7 😥
just stop with that annoying stick
First off learn english, Second, why reply then. Go get a life....