hii i have nvidia gpu on my windows it works fine i follow all the steps but it always shows error No Gpu found for mining i am searching for 3 days but i didn't get any solution can u help with this please
Of all the miners I’ve had the most success with this one. Far fewer rejected shares with my OC settings and better hash rates in general. BTW did I say this is yet another great video? 😉
Hey Im having troubles with the checksum verification when i compare the values they dont match, what can i do , proceed with installation or i have a wrong file, also i am downloading it from the site
Great video! I have a question, after editing the start_eth with my wallet and pool link, when i launch the start_eth batch file it loads up and gets to "connecting to crazypool" and then crashes. Any advice would be greatly appreciated! Thanks
Hello friend: excellent the video, in my case I am mining ETH in NBMiner, declare my Walet. I ask how often does NBMiner pay? Where do I see what is mined etc. Thanks
Bro ,my nbminer dosent seem to work When I run it , it says access denied , I tried it once by disabling my firewall and another time but allowing the threat Do you have any video recommendation ?
@@rosslobo It is highly probable that the antivirus protection is not well configured, try to disable real-time protection and the others that are below, also exclude from Antivirus Defender the folder where you save the files. Luck
Thanks you, i have question plez i use 1660 ti in ethermine and that giving 30.6mhs then i added the second card 1660ti that mean 2 card 1660ti and that giving me in 17mhs for gpu0 and 16,5 for gpu1 but i changed the pool to nanopool and that giving me 59.5mhs thank you and i hope you answer me plz
I need some help for NBMiner Web Monitor, i do know about the shell in a box remote access, but i am really curious about this nbminer direct web monitor. i can't get it to work. what PORT no. should i put and where to find it
Hey, I'm new, since your comment is 4 months old I guess you figured it out, but as far as I know for mining eth you should join some mining group and the set up of everything is more complicated, NiceHash is easy to set up, literaly just make an account. If you figured it out, what did you do ?
When I mine into my coinbase wallet, the miner runs fine and I am getting 60 degrees, 45 mh and using 100% gpu in msi afterburner, but when I go into task manager it says I'm only using 5% gpu, and I am getting no ethereum in my coinbase account.
Hello, I am currently mining on Hiveos to Binance pool. Binance pool has a high latency where I am ( 80-125 ms). Minerstat claims that they would improve the latency problem. Have you tried Minerstat? Do you recommend that I switch to Minerstat? Thank you in advance :)
Hey i got another question😬 I got a Problem with the power supplys the common supplys got up to 10 pcie that means with Splitter 20 outputs 20 pcie / 3 means i can power 6 gpus on that but this is to less My question is can i trust in mining power supplys with 16 pcie outputs or more you got any experience ?
Nice one! I have an RX580 card and it is reached 30+ after the MOD, 2120/1120 mv850 (around30,400+Mh/s) I use Nanopool, and with Nbminier, I get a very low number of shares per hour (12-17) tried with 7 to 8 hours. It's still the same tried changing the servers and currently using the lowest ping rate server, and still, I face the low shares. Is this coz of Difficulty in the pool ? or something to do with my (Mh/s) rate? Is there any way to increase the shares receiving? Highly appreciate your help.
hello, the start_etc have below problems Error resolving function: nvm1DeviceSetGpuLockedClocks etchash- Failed to establish connection to mining pool:socket operation timed out Algorithm etchash' not supported on device 0 : NVIDIA [21] GeForce 820M. can you help me how to solve this . Thank you very much.
I am trying to mine ETH. I modified the start beam file, when I run the .bat file nothing happens. A windows flashes and closes it self. What am I doing wrong here? Also the latest version of nbminer only gives you two startxxx.bat files.
Hi I'm running an amd rig through nbminer on windows 10, I've tried to follow everything you've said on here, changed all the commands etc and it's running fine HOWEVER my hashrate for each card is at 6.2 and I don't understand how to get it to go up?? Is there something I've missed or not included? Please someone reply, any help is greatly appreciated
Is there any way to turn NBMiner off if you don't want it to continue mining? Just closing the application seems to not work and I have to restart the computer to turn it off completely.
Hey could you help me please? I can't get memory tweak to work. It says I need some driver. Then I put the driver install command in there and now when I try to open nbminer it opens it for millisecond then immediately closes it. Idk how to get this to work??
hi i am getting cuda out of memory (error =2 ) . i have 12gb nvidia rtx 3050 gpu and trying to mine ethereum. i have nbminer 40.1. Can you please tell me how can i solve this issue. i tried increasing the page size but still the error persist
Hi! So with the --mt command the NVIDIA 1080 is automatically set to the best parameters? So I wouldn't need to go the BIOS and configure everything? Sorry I didn't get it well, thank you!
Hi, I am trying to mine ERGO, I did follow the steps but when I try to run my .bat a pop’s up comes: This app can’t run on your PC To find a version for your PC, check with the software publisher. I have windows 10 pro
Is there additional tweaks to do when combining amd and nvidia gpu in a rig? + can I overclock both on afterburner? Im using nicehash and have 1660s and rx570 8gb. Lastly can you recommend OC settings for rx570 I recently checked your website and just OC for rx580 avail, Ty
yes you can use afterburner, you can find more info on overclocks here ua-cam.com/video/3EFf3mvEk7o/v-deo.html and yes you can use the rx 580 OC for 570 they should be veryt close
Wallet address I'm getting from Electrum is in this form bc1q09yd2664m03zp5g6g3t0cyrwgfaz2myax9mhz9, while in start_eth file it is in hex form . How to use this address in start_eth file ?
Hi! All im asking for here is that is it safe to download nbminer on my computer. My fsecure keeps telling me that its a possible virus. Im using nicehash and one of the miners that u can use trough nicehash is NBminer.. So is it safe? Also sorry for being sceptic i just want to be sure that its really fine to use this miner from nicehash.. Thank you for your answers!
Guess I'm comming a bit late but from my experience and a friend of mine it's safe, as long as your GPU can handle constant work and the temperature, I'm new in all of that so I would like to know if you figured it out and what conclusions you'v got, thanks for any answers.
Can somebody help how do I stop mining the cmd goes on forever if I click Ctrl + C it gives me option to quit batch job I’m new into it can somebody please help
is it okay if I'm stil using Phoenix miner download file v5.5c before the incident? because from my understanding, the impact is only for Phoenixminer download file after the incident #cmiiw
Your fine! It's all turned out to be FUD by Phoenixminer. Some guy was spreading a bad Phoenixminer in Bitcointalk forum but it has nothing to do with the original mega folder of Phoenixminer
I do have a question on a mining rig. I want to built. Whats the difference on MSI Gaming RX 580 then a MSI Armor RX 580 since the ones i have are both 8 GB.
Wait when you put your wallet address do you delete .default? you were not clear on that at all!!! I'm stuck shit. I just spent all this time watching this video now i have to find it somewhere else Dx You did get me started though so thanks!
What about how to stop it? If I just close the console window, it closes normally, but my graphics card continues to run hard, the same as it was when I was mining. I'm guessing there must be a proper way to close the miner and end the process? I'm tired of have to reboot the machine every time.
Ctrl+C pompts me if I want to end the process, that appears to do the trick. Closing with the "x" seems to somehow keep some process running that causes the GPU to keep running under load.
Once you enter your own ETH wallet address and run it, let’s say a few days later, how do you get paid? How does the mining payouts reach your ETH wallet?
Question for you guys. If I setup the start_eth batch file with my Coinbase ether address and leave the mining pool address as default, does anyone know how often the payouts are?
The newly written guide is now out! miningchamber.com/gpu-mining/nbminer-tutorial/
Is it still a good investment to mine grincoin
Can you please make a video on how and when do payments happen and how do you see that?
NBminer locks my computer up whereas no other miner has before.
hii i have nvidia gpu on my windows it works fine i follow all the steps but it always shows error No Gpu found for mining i am searching for 3 days but i didn't get any solution can u help with this please
how to get pay out to my binance
Of all the miners I’ve had the most success with this one. Far fewer rejected shares with my OC settings and better hash rates in general.
BTW did I say this is yet another great video? 😉
Thank you very much 💙💙 it's a pretty good miner!
Great video, thanks for the Command-line Arguments that was interesting to learn about.
how do you add the commands. you never explain how to input them
Great video, NB is my favorite NVidia miner, very stable/ low share reject
Hey Im having troubles with the checksum verification when i compare the values they dont match, what can i do , proceed with installation or i have a wrong file, also i am downloading it from the site
Great video! I have a question, after editing the start_eth with my wallet and pool link, when i launch the start_eth batch file it loads up and gets to "connecting to crazypool" and then crashes. Any advice would be greatly appreciated! Thanks
Great video, THANK YOU BRO
Hello friend: excellent the video, in my case I am mining ETH in NBMiner, declare my Walet. I ask how often does NBMiner pay? Where do I see what is mined etc. Thanks
Bro ,my nbminer dosent seem to work
When I run it , it says access denied , I tried it once by disabling my firewall and another time but allowing the threat
Do you have any video recommendation ?
@@rosslobo It is highly probable that the antivirus protection is not well configured, try to disable real-time protection and the others that are below, also exclude from Antivirus Defender the folder where you save the files. Luck
Did u find out where u see what u have mined ??
Thanks you, i have question plez i use 1660 ti in ethermine and that giving 30.6mhs then i added the second card 1660ti that mean 2 card 1660ti and that giving me in 17mhs for gpu0 and 16,5 for gpu1 but i changed the pool to nanopool and that giving me 59.5mhs thank you and i hope you answer me plz
I need some help for NBMiner Web Monitor, i do know about the shell in a box remote access, but i am really curious about this nbminer direct web monitor. i can't get it to work. what PORT no. should i put and where to find it
My Powr and Eff/watt mark 0, although my accept count is increasing. Do you know what is happening?
trying to certify nbminer, cmd prompt just says -hashfile command failed and gives some numbers...was the file compromised?
the bat file doesnt open for me when i double click it , i have set it up properly
holy Crap the "Hey Everyone" at the beginning made me wonder if this was a Louis Rossmann video. lol
Thanks for the video. Helps a lot. A question ----- Directly mining eth or use nicehash what u guys recommend?? I am new
Hey, I'm new, since your comment is 4 months old I guess you figured it out, but as far as I know for mining eth you should join some mining group and the set up of everything is more complicated, NiceHash is easy to set up, literaly just make an account.
If you figured it out, what did you do ?
@@arzantyt i used nicehash since it is easy to use
When I mine into my coinbase wallet, the miner runs fine and I am getting 60 degrees, 45 mh and using 100% gpu in msi afterburner, but when I go into task manager it says I'm only using 5% gpu, and I am getting no ethereum in my coinbase account.
Help the window ofvthe miner closes instantly after booting it up i have a 2060 super
On 8:20 i dont understad what pool base i have to shange? where and how? someone help?
Hello, I am currently mining on Hiveos to Binance pool. Binance pool has a high latency where I am ( 80-125 ms). Minerstat claims that they would improve the latency problem. Have you tried Minerstat? Do you recommend that I switch to Minerstat? Thank you in advance :)
Great job for newbies.
No?
i live under a rock but what the intro song sounds fire lol
Haha it's xxxtentacion hope remix
please help iv just followed the guide and the mi ne is running but when i check my gpu utilzation its 1% ?? its a 2080 super
Hey i got another question😬
I got a Problem with the power supplys the common supplys got up to 10 pcie that means with Splitter 20 outputs
20 pcie / 3 means i can power 6 gpus on that but this is to less
My question is can i trust in mining power supplys with 16 pcie outputs or more you got any experience ?
Nice one!
I have an RX580 card and it is reached 30+ after the MOD, 2120/1120 mv850 (around30,400+Mh/s) I use Nanopool, and with Nbminier, I get a very low number of shares per hour (12-17) tried with 7 to 8 hours. It's still the same tried changing the servers and currently using the lowest ping rate server, and still, I face the low shares. Is this coz of Difficulty in the pool ? or something to do with my (Mh/s) rate? Is there any way to increase the shares receiving? Highly appreciate your help.
hello, the start_etc have below problems
Error resolving function: nvm1DeviceSetGpuLockedClocks
etchash- Failed to establish connection to mining pool:socket operation timed out
Algorithm etchash' not supported on device 0 : NVIDIA [21] GeForce 820M.
can you help me how to solve this . Thank you very much.
I am trying to mine ETH. I modified the start beam file, when I run the .bat file nothing happens. A windows flashes and closes it self. What am I doing wrong here? Also the latest version of nbminer only gives you two startxxx.bat files.
Hi I'm running an amd rig through nbminer on windows 10, I've tried to follow everything you've said on here, changed all the commands etc and it's running fine HOWEVER my hashrate for each card is at 6.2 and I don't understand how to get it to go up?? Is there something I've missed or not included? Please someone reply, any help is greatly appreciated
What is the point of the .default after your address and do you need it?
Is there any way to turn NBMiner off if you don't want it to continue mining? Just closing the application seems to not work and I have to restart the computer to turn it off completely.
Hey could you help me please? I can't get memory tweak to work. It says I need some driver. Then I put the driver install command in there and now when I try to open nbminer it opens it for millisecond then immediately closes it. Idk how to get this to work??
hey bro i am trying to mine with v100 cards from nvidia but phoenix and nb both not working properly detecting just one or two but i have 4 in system
Where and how do I use the -d --device command to run multiple gpus?
if i need to stop mining, do i just close out of command prompt? I'm used to nicehash where i just press pause, so wondering if there's a better way
You can overclock in the commandline now.
great video, not entirely understanding how you use the commands? I understand what they do from your video but not sure where I input them.
input them in the bat file where you put the wallet address
@@seekingsalvation546 does that need to be in a specific order?
In the same string of your wallet adress, at the end of it
So you cannot mine with nbminer on windows 11 because so far its not exactly working?
I am getting an Error , looks like NDminer is trying to mine with both my cpu and gpu. How do I disable the cpu mining
hi i am getting cuda out of memory (error =2 ) . i have 12gb nvidia rtx 3050 gpu and trying to mine ethereum. i have nbminer 40.1.
Can you please tell me how can i solve this issue. i tried increasing the page size but still the error persist
Didnt notice the temp control command, that would be useful
Hi! So with the --mt command the NVIDIA 1080 is automatically set to the best parameters? So I wouldn't need to go the BIOS and configure everything? Sorry I didn't get it well, thank you!
Not sure what you mean by bios but you still have to overclock it, mt just makes you not need to use the enlargement pil
looks like you forgot to link the mining pools video in the description
what if the sha 256 file are not the same with the output from the command line, what should will do?
Hi,
I am trying to mine ERGO, I did follow the steps but when I try to run my .bat a pop’s up comes:
This app can’t run on your PC
To find a version for your PC, check with the software publisher.
I have windows 10 pro
Is there additional tweaks to do when combining amd and nvidia gpu in a rig? + can I overclock both on afterburner? Im using nicehash and have 1660s and rx570 8gb. Lastly can you recommend OC settings for rx570 I recently checked your website and just OC for rx580 avail, Ty
yes you can use afterburner, you can find more info on overclocks here ua-cam.com/video/3EFf3mvEk7o/v-deo.html and yes you can use the rx 580 OC for 570 they should be veryt close
@@MiningChamber got it, thanks man!
when it opens command it tells to press any button to continue but when i press a button it just closes did i do something wrong?
Can you mine ERG with nbminer? I don't see it in the list.
Wallet address I'm getting from Electrum is in this form bc1q09yd2664m03zp5g6g3t0cyrwgfaz2myax9mhz9, while in start_eth file it is in hex form . How to use this address in start_eth file ?
where do you see the DAG file size when it's running?
I Have Problem when i start mining conflux in the miner it's give me 8 megahash , but my gpu is 32 megahash !
How i can fix it ?
So what is this Stratum+tcp: or the other one i saw was ethproxy+tcp: How does this factor into the mining pool address?
Could you make a video on T-Rex miner?! :)
I can't seem to download it :/
The file i downloaded from github my AV says it has malware. Is this normal or?
How do i get the payouts? After a whole day I'm still at 0 in my wallet. I checked everything, all my settings are correct and i get 63.5 MH/s
so if I already have HiveOS I could ust NBMiner from there?
nice video man! changed from phoenix to nbminer today, my 2080s is showing only 79 in Mutl any advice? Thx
I have a question please, can I mine 2 cards with Nicehash and 2 cards with nbminer on windows at same time without having any issue?
What is this music ? the name please
can someone help. its says failed to establish connection to mining pool socket operation timed out. if you know something please help
motherbord b450-plus prime
are is sutible for rig mining?
is this possible using from 2 or 3 difrent model of gpu at a rig
for example rx 580 with rx 5700xt
can mine using NBminer directly to coinbase?
because of the phoenixminer incident I'm using now NBminer
Nice!
Which one is better in your opinioin?
Nice one bro
Thank you brother!
Hello, after putting my wallet address, how often does NBminer deposit Eth to my wallet?
hello how to configure 2 or more video cards, I currently have 1.thanks
This should help ua-cam.com/video/NbRo-Nyr2CU/v-deo.html
Nice video bro! What is best the software Miner: T-Rex, HiveOS, NBminer, NiceHash Miner, Phoenixminer, Lolminer and Ethminer?
Video coming on that topic soon! Thank you!
What about Kryptex? It doesn't seem very popular, is this due to higher fees?
@@inis99999 I actually do use it in the guide for mining on pc! They have some nice perks on cashing out but yes probably higher fees
My bat file just closes after it runs for 2 seconds, any idea to fix it
Can you help please, I need recommendation best miner for rtx 3070 and rtx 3090fe on same mother board please, Thanks bro
I got 0 share with GTX 1650 Ti :( can u tell me the problem?
Hi! All im asking for here is that is it safe to download nbminer on my computer. My fsecure keeps telling me that its a possible virus. Im using nicehash and one of the miners that u can use trough nicehash is NBminer.. So is it safe? Also sorry for being sceptic i just want to be sure that its really fine to use this miner from nicehash.. Thank you for your answers!
Guess I'm comming a bit late but from my experience and a friend of mine it's safe, as long as your GPU can handle constant work and the temperature, I'm new in all of that so I would like to know if you figured it out and what conclusions you'v got, thanks for any answers.
Can i run nvidia and amd card together with NBMiner?
Can somebody help how do I stop mining the cmd goes on forever if I click Ctrl + C it gives me option to quit batch job
I’m new into it can somebody please help
how issue yellow error " socket error : the remote host close the connection
is it okay if I'm stil using Phoenix miner download file v5.5c before the incident? because from my understanding, the impact is only for Phoenixminer download file after the incident #cmiiw
Your fine! It's all turned out to be FUD by Phoenixminer. Some guy was spreading a bad Phoenixminer in Bitcointalk forum but it has nothing to do with the original mega folder of Phoenixminer
Help me sir i am configuring MSI RX 5500 XT 8GB card i don't know overclocking setting what can i do help me
Hi, in Italy 580s 8gb cost way too much. Can u tell me where i can find good price quality card to mine?
I do have a question on a mining rig. I want to built. Whats the difference on MSI Gaming RX 580 then a MSI Armor RX 580 since the ones i have are both 8 GB.
Both are good i like gaming x more
@@MiningChamber gotcha thank you so much!
Can I use --mt with AMD and Nvidia in the rig? I always get error when writing "--driver install -mt (any number)".
It has to be the GPUs that mt supports and for the ones it doesn't leave it as 0. For example -mt 1,0,1 (applies for first and 3rd gpu, skips second)
Have you research about mining RVN? Can you tell me your thought?
Second best coin to mine as of now
How to get more efficiency? I think mining rvn need more power
how to enter pool adress u didnt explained and that is hardest part. it doesnt work for me?
Do you have a discord?
Link in description!
How do I get the IP address to cash out with ethermine?
Wait when you put your wallet address do you delete .default? you were not clear on that at all!!! I'm stuck shit. I just spent all this time watching this video now i have to find it somewhere else Dx
You did get me started though so thanks!
What about how to stop it? If I just close the console window, it closes normally, but my graphics card continues to run hard, the same as it was when I was mining. I'm guessing there must be a proper way to close the miner and end the process? I'm tired of have to reboot the machine every time.
Ctrl+C pompts me if I want to end the process, that appears to do the trick. Closing with the "x" seems to somehow keep some process running that causes the GPU to keep running under load.
What are the differences between each miners?
Making a video on that very soon
@@MiningChamber Can't waittt
Subscribing for this video in the future 👍🏼
Suggest best miner , for rtx 3060 and rx 6700xt on same mother board please
phoenix or nbminer
pools in the US for NBminer. Having a hard time finding address
does it transfer to metamask automaticaly?
Thank You!!!!!
i need disable GPU 1, how i can do this?
How do I see the profits with nb miner
All that is missing is to force set the overclock/ undervolt profile from the miner itself.
It's not possible to use Overclock Commands in NB Miner? Like -cclock and -mclock ? That's really bad :(
@@mohsenk1438 You can Afaik.
@@Skyflairl2p can you explain how please?
How do I get the -mt working. Any help
Once you enter your own ETH wallet address and run it, let’s say a few days later, how do you get paid? How does the mining payouts reach your ETH wallet?
I have 1 rx580 4gb I am not able to mine, what am I doing wrong?
How to watch how many eth i mined before payout ?
hey man. how to restart the rige after some crash? i know how on old claymore miner. but not this one.
I don't think they have a watchdog in there but double check if they do in the commands list
Question for you guys. If I setup the start_eth batch file with my Coinbase ether address and leave the mining pool address as default, does anyone know how often the payouts are?
Also @Mining Chamber , great video! Really appreciate all the information 💯
Hello, can I send mined Ethereum direct to my binance exchange wallet ? Or do I need to send to Exodus first ?
It's always recommended to send to wallet first. Binance has a pool as well and a wallet so you can send it there I'm sure