Seems nice we have open eaves so I don't think they'd work for us. Would need to be able to screw to each eave and hope they line up ok with the 24" gaps and somehow shim them to the pitch angle so they don't aim at the wall.
I noticed that the Pro version is out, and the length distances are different. Do you have channels for the new Pro Version? By the way, your video is awesome. Thank you
Ok I'm in! Already got Govee Pro 200' kit. Placed my pre-order for this track system. Can't wait to get this done. How confident are we with brads/staples to hold all in place permanent?
If in hardie board with brad nails very. In vinyl or metal with screws very. I warranty my work for 3 years for now. I would like to be able to extend that in the future. Thank you so much for your order!
Thanks for asking...the material is PVC Rigid, a quick google will give you some good insight to that material, which is a good one for outdoor. Most of the time, due to being under your soffit, the tracks will never be in direct sunlight for extended periods of time. If you are paint matching...then you vastly increase the potential life of the track. My product use case is so new, I do not currently offer a warranty as I have no control over how installers and home owners "handle" the product. However, I do offer at least a 3 year warranty on personal installs at this time. As "time tested" passes and I gain more insight with my manufacturer....I suspect I will land on a solid warranty offer.
Little more prep involved as I would recommend pilot holes for stucco in any application. However, you can likely get away with a small thinner concrete screw. As far as the tracks… concrete screws, or nails aren’t a problem. You can also use an adhesive tape. However, I wouldn’t expect it to last.
The connectors do fit in the track nicely without you having to cut/ or splice un-necessarily. However, you do have to clip off the loose thumbscrew piece, just like you would an end cap on a govee strand being connected. The Govee connectors fit together tightly and are protected by the track as well. If you feel you need the added protection at the connectors...you can use a heat-shrink sleeve, or for a quick addition...electrical tape and both will fit inside. However, it is not necessary in my opinion and I have never hand an issue.
Well, you can use construction glue. However, you would never want to take them down causing a lot of repair to stucco. Second, the best way is to drill small pilot holes using a small concrete drill bit. Then use small concrete screws carefully not to over tighten. Stucco soffit is a little bit of a cumbersome challenge unfortunately.
Hi, I just purchased this, how do I track my order? It said 1-3 Bussiness days for Canada but it has been over a week now. Can’t wait to install these bad boys!
1-3 days is the cost level of shipping you selected. Please shoot a request from the contact form on the website with your order number to check status, if you haven’t already done so. Thanks!
@@DerbyCarVidzyes I did. Super easy to to use and put up. The only issue was that I didn’t order enough lol Gotta make another order at some point to cover the top peak of my house. Would recommend. Just be patient is all.
Couple ways. Mount them as normal with the slant as you still get a great lighting effect. You can also use wedges, or an entire wood trim piece base that can be ran and affixed with wedges for the standard look with lights pointing down.
Unfortunatly, rafters are usually spaced 24" It could be used for rafters spaced less than 19" However, would still recommend a base trim peace to mount the tracks to.
If you like the design. They force you to somehow get a perfect puck placement mount screwed in first and then the tracks are really thin and still look like wires. My guess is the material is very flimsy as well...haven't seen in person yet.
Expansion efforts in the works. Shoot us an email contact@jroweinc.com (give me some time to take care of the current initial holiday season rush) and lets start the convo and see what I can do.
Yes, as noted on the site prior to purchase we are estimating 6 weeks maybe more, hopefully less. The shipping dates will become more firm over the next two weeks.
I would imagine you could use thumbtack or task rabbit to hire inexpensively to get them painted pre or post install. We tend to shoot for exact match on the painting hence offering in white only.
Understandable…the price is necessity for the material used and mfg… not at all because I want it that way. I’m working to source a better price point in the coming years. However, lights, tracks and all included… is typically more affordable….and you could argue better looking than the top distributor brands like trimlight and jellyfish 🤷🏼♂️. Certainly an opinion though.
Just got mine. Now need to paint them and install. Can't wait to get them up
That’s great. Thank you so much for your order!
@@jroweinchey I was wondering what you do where the lights connect. They don’t fit in the track with the cover
Seems nice we have open eaves so I don't think they'd work for us. Would need to be able to screw to each eave and hope they line up ok with the 24" gaps and somehow shim them to the pitch angle so they don't aim at the wall.
Yeah you would need to do some custom work for that application.
I noticed that the Pro version is out, and the length distances are different. Do you have channels for the new Pro Version? By the way, your video is awesome. Thank you
Thank you! At www.govpermtrack.com you can find the tracks for Govee Pro, Ellite, Outdoor 2 and original. All made specifically for Govee. #govee
@@larrybustamante8906 yes we have versions specific to each of the outdoor puck style lights
Ok I'm in! Already got Govee Pro 200' kit. Placed my pre-order for this track system. Can't wait to get this done. How confident are we with brads/staples to hold all in place permanent?
If in hardie board with brad nails very. In vinyl or metal with screws very. I warranty my work for 3 years for now. I would like to be able to extend that in the future. Thank you so much for your order!
@@jroweinc Thank you sir! Appreciate the ground level and hands on vision into this new stuff.
Awesome product but do you have a mount the will affix a light at the center of a peak?
I will showcase this in the next installer series vids. You will notice all installs get a peak mount light as the kit comes .
Hello, how does the PVC hold up to weather/sun? What is the warranty?
Thanks for asking...the material is PVC Rigid, a quick google will give you some good insight to that material, which is a good one for outdoor. Most of the time, due to being under your soffit, the tracks will never be in direct sunlight for extended periods of time. If you are paint matching...then you vastly increase the potential life of the track. My product use case is so new, I do not currently offer a warranty as I have no control over how installers and home owners "handle" the product. However, I do offer at least a 3 year warranty on personal installs at this time. As "time tested" passes and I gain more insight with my manufacturer....I suspect I will land on a solid warranty offer.
can this be used for new govee permanent outdoor light 2 or govee permanent outdoor light 1?
Absolutely. We have kits for original, elite, outdoor 2 and of course PRO
Are these tracks easy to screw into a stucco soffit with a concrete screw? What would be your best suggestion for this?
Little more prep involved as I would recommend pilot holes for stucco in any application. However, you can likely get away with a small thinner concrete screw. As far as the tracks… concrete screws, or nails aren’t a problem. You can also use an adhesive tape. However, I wouldn’t expect it to last.
The connectors used to connect two 16.4' light strings together fit inside the track correct?
The connectors do fit in the track nicely without you having to cut/ or splice un-necessarily. However, you do have to clip off the loose thumbscrew piece, just like you would an end cap on a govee strand being connected. The Govee connectors fit together tightly and are protected by the track as well. If you feel you need the added protection at the connectors...you can use a heat-shrink sleeve, or for a quick addition...electrical tape and both will fit inside. However, it is not necessary in my opinion and I have never hand an issue.
Is white the only colour can they come in black
@@TheHobbyExclusive they only come in white. However, are paintable to match any color.
Any idea how to mount these to stucco?
Well, you can use construction glue. However, you would never want to take them down causing a lot of repair to stucco. Second, the best way is to drill small pilot holes using a small concrete drill bit. Then use small concrete screws carefully not to over tighten. Stucco soffit is a little bit of a cumbersome challenge unfortunately.
Hi, I just purchased this, how do I track my order?
It said 1-3 Bussiness days for Canada but it has been over a week now.
Can’t wait to install these bad boys!
1-3 days is the cost level of shipping you selected. Please shoot a request from the contact form on the website with your order number to check status, if you haven’t already done so. Thanks!
Did u end up getting your shipment yet?
@@DerbyCarVidzyes I did. Super easy to to use and put up.
The only issue was that I didn’t order enough lol
Gotta make another order at some point to cover the top peak of my house.
Would recommend. Just be patient is all.
@@anmoldoomra4235sweet!! Nice to hear your happy and got them!
I was just on the website and it says there’s no products for the Outdoor 2 version
@@mattcabala229 please check back soon. Currently doing an inventory evaluation. Next 24-48 hours. Thanks !
Do you sell the light pucks separately or where can I get them?
Yes I’ll be adding them soon.
How do you install these on an older house with eves that are slanted?
Couple ways. Mount them as normal with the slant as you still get a great lighting effect. You can also use wedges, or an entire wood trim piece base that can be ran and affixed with wedges for the standard look with lights pointing down.
Can this be installed on open rafter tails?
Unfortunatly, rafters are usually spaced 24" It could be used for rafters spaced less than 19" However, would still recommend a base trim peace to mount the tracks to.
@ thanks. I’ve got some 1”x2” I’m going to paint and install.
Do you make one for Eufy E22?
I would subscribe to my channel and be patient if I were in your shoes. 🤷🏼♂️
is it possible to just get the puck covers??
At this time only as replacements, or a shipping error....however, it is in the works.
New nanoleaf comes with the hardware now
If you like the design. They force you to somehow get a perfect puck placement mount screwed in first and then the tracks are really thin and still look like wires. My guess is the material is very flimsy as well...haven't seen in person yet.
Where is this sold?
@@hashtagjustadad5110 www.govpermtrack.com
@@jroweinc thank you.
@@hashtagjustadad5110 np!
can i get this in the UK?
Expansion efforts in the works. Shoot us an email contact@jroweinc.com (give me some time to take care of the current initial holiday season rush) and lets start the convo and see what I can do.
Does it come in other colors?
Not at this time. However, you can paint to match any soffit color.
Hey i just bought 250ft worth of this track off your website, can you e-mail me an invoice/ info on how long Ill be waiting for the product to ship,
Yes, as noted on the site prior to purchase we are estimating 6 weeks maybe more, hopefully less. The shipping dates will become more firm over the next two weeks.
Let me know when they’re available in black I really don’t wanna sit there and paint 200 feet
I would imagine you could use thumbtack or task rabbit to hire inexpensively to get them painted pre or post install. We tend to shoot for exact match on the painting hence offering in white only.
Where can we purchase these permtrack
govpermtrack.com/
Did you place and order and if so did you receive it
@jonathanmoore5929
No we haven't not yet sir we will order it doon
@@jonathanmoore5929 happy to answer any questions regarding shipments through our email at contact@jroweinc.com
are those prices real? i will pass
Understandable…the price is necessity for the material used and mfg… not at all because I want it that way. I’m working to source a better price point in the coming years. However, lights, tracks and all included… is typically more affordable….and you could argue better looking than the top distributor brands like trimlight and jellyfish 🤷🏼♂️. Certainly an opinion though.