I am glad that you dismantle it and shows where it usually leaks and had to be fixed ,and how to remove and replaced it thanks buddy.l appreciate your shares 😮
He was happy for this new video, I hope your time is better for new ones and connected waiting for a guaranteed like always a fan who admires much deserved success is recognized for everything
Wow masterclass type brand got a lots of o rings and much to dismantles if it's leaks ,like thus so.and needs to make sure that it's install perfectly wow this a great job for abiginers to work out.
Thanks for the exelent video but i was just wondering how that cockassembly got from 44 to 41 mm just by disassembly , putting it on the table and reassembly . Sorry for maybe bad translation .
Hi, l’ve seen tris video 4 times and l love it . Ir you can and it doesn’t affect you at all, can you give me the link where l can see all the parts with your fx impact m3 code and be able to order it without making a mistake . Possible
You can find schematics and parts order form on our website and if you have any questions please feel free to email us and we will assist you in any way possible.
If my M3 is leaking but still under warranty, would FX send me a seal kit or woyld i be reqd to ship my gun to a service center? With such good videos like yours, theres no doubt that i can diy mine. M3 leaking from barrel breach end.
We won’t just send out seal kits to everyone that say they have a leak 😉 i guess you can understand that . But if it’s under warranty call the distributor and ask him . He knows when you have bought the rifle from them and might be able to help you out getting what you need .
I have one too, and love it but agree it is not the greatest for hunting and field situations. It’s the first Airgun I owned that has ever leaked. And it’s only about 6months old. I think it’s because it goes from my warm house to freezing night hunts and the temperature change messes with it. (My guess) Have you found a better alternative?
I've had fx3 ,bought brand new when they first came out, I go through 2000 pellets a week, give it a clean once a month, and have had absolutely no issues whatsoever, so my question to people who say what you have is, what are you doing with the gun, I'm lost
@@nialbarnsley4108 I’ve had issues with taking it out night hunting in the cold weather. The seals can’t handle the expansion and contraction and leak.
@@oneofthosepeople2101 check my other reply. I'm out all year round , 2000 pellets a week. Had m3 since they were released and never had a problem. What are you people doing with your guns
@@nialbarnsley4108 you take it out in 15 degrees? You know it’s possible that they have a quality control problem and you got a good one. Why are you so certain that people are abusing their tools? I take extreme care of everything I own and I have had issues. It’s not an unbelievable situation, how are you so confused?
Hi man 2 things are insanity stupid. Please man tell fx to make it easy for removal of the c1 it's really tight and to use that tools is vary wrong. I mean how difficult do we have to think for it. Let me give you your own idea. You see the cocking liver linkage rod it's super easy to unscrew it nor tight, it's because you guys made holes in that rod. Please do the same for the c1 valve stm rod. Life will be very easy by this. And 1 more thing. 1 big silver screw that's seal tighten, which is located under the power block. Please please 🙏 I begg you guys don't seal tight it with glue. It's very hard to unscrew it and it needs flame heating to unscrew it too. And 10 out of 3 screws gets damaged 💔 and won't come off, no matter what you try. These are the worst flaws that I have ever faced in my life. And yes I deal with your fx impacts in bulk quantities. And I still love it
I am glad that you dismantle it and shows where it usually leaks and had to be fixed ,and how to remove and replaced it thanks buddy.l appreciate your shares 😮
ive been working on 2 mk2 and 2 M3's and now I can strip them down just as fast as ER - thanks er
My MK2 just blew a seal almost took my cheek off when the whole bottle emptied... any ideas bud..?
A master, Ernest.! We learn much with you,. Thanks
He was happy for this new video, I hope your time is better for new ones and connected waiting for a guaranteed like always a fan who admires much deserved success is recognized for everything
Thank you very much for contribution for fx lovers
Always wishing much more success fan that Lis wants with everything heart is always connected here 🇧🇷
Wow masterclass type brand got a lots of o rings and much to dismantles if it's leaks ,like thus so.and needs to make sure that it's install perfectly wow this a great job for abiginers to work out.
I love my m3.but I can't stop spending money on it 😊
Ernest can you do a masterclass on tuning the panther 700 with the 8mm hammer in .30?
Ernest , you make it look easy!
Finally! Thanks kabayan!
Now I can rebuild my m3 and replace the o ring's with no problems, it easy when you know how 😊
Thanks for the exelent video but i was just wondering how that cockassembly got from 44 to 41 mm just by disassembly , putting it on the table and reassembly . Sorry for maybe bad translation .
Thank you, Sir.
Hi, l’ve seen tris video 4 times and l love it . Ir you can and it doesn’t affect you at all, can you give me the link where l can see all the parts with your fx impact m3 code and be able to order it without making a mistake . Possible
You can find schematics and parts order form on our website and if you have any questions please feel free to email us and we will assist you in any way possible.
Golden info 👍 thanks
Here in india, power of air guns have been downgraded to 20 joules only. Can you or do you have the trick to make jt as powerful as in your place
Does the silver setscrew under the powerblock needs to be sealed? Because the flat spot on the valvehouse lines up with the transferport hole...
How about a master-class, seal replacement on the old models. Fx Cyclone maybe
Thanks Ernest.
What's the o d of the round rubber seals .
what's a recommended lubricant oil?
Can we get an FX PANTHERA masterclass?
Coming soon!
Thanks ,what is the size of regulator 1 manometer?
Can the impact m3 right side lever be switch to the left side?
👍Thanks
If my M3 is leaking but still under warranty, would FX send me a seal kit or woyld i be reqd to ship my gun to a service center? With such good videos like yours, theres no doubt that i can diy mine. M3 leaking from barrel breach end.
We won’t just send out seal kits to everyone that say they have a leak 😉 i guess you can understand that . But if it’s under warranty call the distributor and ask him . He knows when you have bought the rifle from them and might be able to help you out getting what you need .
You don’t want to take the whole gun apart? But, you take the whole gun apart?
👍👍thanks
How much kind of airgun
M3 .35 how to toning bro
Thens Ener
I got fx3 I don't like it !! Not field practical to many little issues !! Don't buy one!!!
I have one too, and love it but agree it is not the greatest for hunting and field situations.
It’s the first Airgun I owned that has ever leaked. And it’s only about 6months old. I think it’s because it goes from my warm house to freezing night hunts and the temperature change messes with it. (My guess)
Have you found a better alternative?
I've had fx3 ,bought brand new when they first came out, I go through 2000 pellets a week, give it a clean once a month, and have had absolutely no issues whatsoever, so my question to people who say what you have is, what are you doing with the gun, I'm lost
@@nialbarnsley4108 I’ve had issues with taking it out night hunting in the cold weather. The seals can’t handle the expansion and contraction and leak.
@@oneofthosepeople2101 check my other reply. I'm out all year round , 2000 pellets a week. Had m3 since they were released and never had a problem. What are you people doing with your guns
@@nialbarnsley4108 you take it out in 15 degrees?
You know it’s possible that they have a quality control problem and you got a good one. Why are you so certain that people are abusing their tools?
I take extreme care of everything I own and I have had issues. It’s not an unbelievable situation, how are you so confused?
Świetna wiatrówka ale za bardzo skomplikowana za taką kasę, SNOWPEAK M60 CENOWO IJAKOŚĆIĄ JEST LEPSZY
Jak kupa do sera się ma m60 do m3..(z autopsji)
@@piotrjarosz4687 jaka cena tego sera???
Hi man
2 things are insanity stupid. Please man tell fx to make it easy for removal of the c1 it's really tight and to use that tools is vary wrong. I mean how difficult do we have to think for it. Let me give you your own idea. You see the cocking liver linkage rod it's super easy to unscrew it nor tight, it's because you guys made holes in that rod. Please do the same for the c1 valve stm rod. Life will be very easy by this. And 1 more thing. 1 big silver screw that's seal tighten, which is located under the power block. Please please 🙏 I begg you guys don't seal tight it with glue. It's very hard to unscrew it and it needs flame heating to unscrew it too. And 10 out of 3 screws gets damaged 💔 and won't come off, no matter what you try. These are the worst flaws that I have ever faced in my life. And yes I deal with your fx impacts in bulk quantities. And I still love it
Definitely my dumbest purchase ever. This POS gun is always leaking. Absolute trash.