@@poto4969The steel sander may not be wide enough for the planker, but idk, it might be. Just save till you can get the industrial sander, it'll let you sand bigger pieces of wood without having to cut them up.
Either the spacing between the two corner conveyors or the setting of the planker could be the issue. Probably the planker as if the game lags a tiny bit while setting the size you could accidentally set it too big or small.
Make sure that either the wood isnt too long or that the width and height on the planker is set correctly for how far you spaced the elevator. If none of those work or you cant be bothered with that, now you can just use an alignment conveyor because it'll just teleport anything that goes into it, to the end of the conveyor.
Hey @Nikoijp, I'm new to the game and i cant figure out how much the total cost will be.... Can you please tell me that? Also, How much i will have to increase my plot to fit this thing...? Although i love your builds and i appreciate you a lot!
@@PanicDooDoo It depends on the wood you feed into it. I would try to make the plank as short as possible because then it'll fill the truck better from the side.
There weren't that many meaningful updates and I didn't want to be a youtuber that just posts on every update. I want each of my videos to be meaningful and useful. And with the planker that has just been added it gave me something to make a tutorial on.
Due to an update that makes the planker the same speed, the bottom conveyor in the planker is now useless and does not need to be built
does it work with a steel sander?
@@poto4969The steel sander may not be wide enough for the planker, but idk, it might be. Just save till you can get the industrial sander, it'll let you sand bigger pieces of wood without having to cut them up.
@@nikoijpcan you make a simpler tutorial if thats ok because i cant really understand this i got 90k saved up
@@nikoijpmy tiny brain cant keep up XD
@@nikoijpim trying to find a loader + unloader but they are expensive and hard tbh
pro wood processor that i will definitely build
i love this video as it helped me come out of the closet
ah, Lumber tycoon2 but more advanced?
lumber tycoon 2 if it was updated
if lumber tycoon was a ps2 game
This would be the ps3 adaptation
like how raging blast is a ps3 version of bt3
Hey thats the vehicle I made! :)
Mine cant go up why i spent 20 mins to make this and it wont work
That's brilliant
i ran into a problem with the lower corner conveyor as the planks wont go up even if the direction is right. any thoughts?
Either the spacing between the two corner conveyors or the setting of the planker could be the issue. Probably the planker as if the game lags a tiny bit while setting the size you could accidentally set it too big or small.
I dont know what i made wrong but the wood dont go up the elevator😢😢 can you help me please
whenever the wood goes out of the planker it doesn't go up the elevator
Make sure that either the wood isnt too long or that the width and height on the planker is set correctly for how far you spaced the elevator. If none of those work or you cant be bothered with that, now you can just use an alignment conveyor because it'll just teleport anything that goes into it, to the end of the conveyor.
@@nikoijp it works now thanks!
how do i see the numbers of the part
You need the tape measure
Genius
I love my ugly engineering brainchild tho
Hey @Nikoijp, I'm new to the game and i cant figure out how much the total cost will be....
Can you please tell me that?
Also, How much i will have to increase my plot to fit this thing...?
Although i love your builds and i appreciate you a lot!
60-70k, but this is not accurate
i recommend using a conveyor belt inside of the planker to make it faster
he legit did
what is the xyz axis bro
What measurements to use with plek?
Yall can just use tilted instead
how many studs in total because I need to know how much i need to buy for my plot.
50
HEY NIKO I PLAY OAKLAND TODAY AND WHEN I PUT OAK INTO THE SANDER IT GETTING LIKE SLOW MOTION :( CAN U HELP ME?... THANKS!
The server is most likely lagging. Try going to a solo server.
there is no translation in the video, it doesn't make you want to watch....
Will it change the amount of money you earn if the plank is a tiny piece or a big piece?
Yes, the larger the plank, the more money it is worth.
@@nikoijpok thanks you what size plank you recommend
@@PanicDooDoo It depends on the wood you feed into it. I would try to make the plank as short as possible because then it'll fill the truck better from the side.
YALL WILD
FIRST TIME SEEING A WOOD AUTO UNLOADER ☠
THIS IS JUST LUMBER TYCOON 2 BUT ITS A COPYCAT
Except oaklands is better
True lol
where can i find illumine designs
Its in the desert, follow the roads and read the arrow signs.
How or where do i get the tape measure?
You can buy the tape measure at Illumine Designs
Thx, buddy
i have no idea how to get a ramp
You can purchase the ramp schematic at Oak Depot. It's in a box to the left of the checkout.
isn’t that a wedge
I’m running into issues with the wood not going up cause it’s to thin, it’s magma btw, I was using 3by3 should I use the 1.5by1.5?
Yea, if its too thin then you can just reduce the width and height, as long as the piece won't be too long and get stuck in the elevator.
@nikoijp why did u quit for 4 months
dead
There weren't that many meaningful updates and I didn't want to be a youtuber that just posts on every update. I want each of my videos to be meaningful and useful. And with the planker that has just been added it gave me something to make a tutorial on.
Alr@@nikoijp
Hey the author of this video, can you please add me? And can you help me to get better on this game?