Great idea! I live on winery row (it’s way out of hand here) in central Texas, and have large trashbags full of corks, and no I don’t drink! 😂 I make topwater lures, among other useful things. Going to add this, and some other modifications for buffers etc. to my list. Really appreciate you sharing your ingenuity. Happy New Year! 👍👍👌
@@Aprilfool4121 only if you’re time is worth nothing, mine is worth $115 per hour, so I would rather buy a $3 flapper wheel and save my customers a lot of money
A great idea.. But unless you have a load of pipes to clean up it's easier by hand. But the idea is great and simple and I'll use it for other sanding jobs that will be more suited to this type of sanding wheel. Well done and thanks for the great video.
Jim let’s be honest, you’ll never use this idea. You’re a nice guy Jim, But you’re not nice enough to use this idea. Jim have a good 2023 my good friend
Есть способ гораздо проще. Делаем на шпильке продольный рез болгаркой. Вставляем наждачку в разрез и наматываем ее на шпильку. ВСЁ. Ну и естественно потом в шурика вставить.
We've all been in the middle of a project and needed something that we didn't have. Sometimes you just really don't wanna run to the store, right? Especially when you already went like 30 minutes ago when you needed another thing, hahaha This is a great idea if you have all those parts. I love coming up with shit on the fly, it's fun honestly. I'm sure everyone has fabricated a tool they didn't have. This is quick thinking.
Better to cut a slot in the cork, thread the sandpaper in and wind it round so there's a loose flap. That will sand any surface and just trim it back when worn.
Tried this once. Problem: Friction generates heat, which melts glue, which ends pretty little rolls of sand paper.
What you on about? He didn’t use no glue!
Генитально!
Как только вижу термоклей, понимаю, будет ненужная самоделка.
плавкий клей нагрелся и все разлезлось
😅
💯
Хрень полная , секунд на 30 работы , дальше клей разогревается и все идет по одному влажному месту .
Супер, правда термоклей отклеивается от тепла
Вообще пофигу, там исполуется бумажная наждачка, она распадется быстрее чем нагреется клей
похоже.чел.давно.в.магаз.не.ступалл
Всё! Завтра же с утра за вином!
Я тоже ,,
Огурцы и contex не забудьте докупить!!!
термоклей хрень полная нагреется и распадётся
Отлично! Есть повод сбегать в магазин за бутылочкой вина. Лучше 2 возьму. На вторую пробку наждачку мелкозернистую. 😀
бери сразу ящик.ну шоб сто раз не бегать
@@user-do5ze4ub9k Убедил. Новый годна носу, не пропадет. Да и пробок на год хватит😀 С наступающим.
Slick. The tightening of the nut/washer provides compression that holds the sandpaper.
Well done buddy. We hadn't worked that one out.
Хорошая самоделка! Вот только есть вопрос:
А больше 2 минут она проработает?
U tebia malo probok ot vina???? Ili dorogu do magazina snegom zamelo?
Исполнение дерьмо. На таком биении ничего не сделаешь.
Идиотовидео
Но это легко устранимо с помощью той же дрели.Потом по размеру склеить бумагу и вперёд))
и термо клей вариант говно.
@@user-jj3fo3ni8z можно взять покрепче, найрит, ПВА- д3, 88-й , суперклей не самый дешёвый , и ок !💪
А то, что спермоклей от нагрева теряет свои свойства- никто не думает. Доктора в студию!!!
Это заявка для доктора дью. Срочно позовите доктора!
Нафиг надо, надоели эти кринжовые самоделки у него в видео. Лучше пусть что-то более интересное разбирает
you should mount a wing nut, to facilitate the replacement of the abrasive cylinder🤗
And possibly use larger washers on the cork. It might compress better.
Мой кот тоже яйца лижет,когда делать нечего....
Весь в тебя
А у меня, как у человека армейского, собака красит будку
Fantastic is an idea of a genius!!
What a innovation he has to be awarded noble prize 🏆
Nobel Prize
thank you. The only problem I have is, after I drink that whole bottle of wine, I can't faribikate nuttin.
True but you no longer care.
Finally a homemade tool I might actually use
No, the glue heated up from friction and everything fell apart
lol
You do know Dremel makes pretty much the same thing, probably works a lot better too
And with the time ,the bottle of wine the nut bolt most likely cheaper too
I bet the sandpaper slips on the cork. It’s also a good idea to drill the hole in the exact center of the cork.
Not THAT long and more costly, though.
Drum sander set of 5 for about 10 bucks!
Док, настало твое время!
Опередил 😄
делитант,Я прав мужики?
Нет. Правильно: дилетант.
на 107%
Por fin..... Algo funcional.... Felicitaciones.... 👍
Гениально. Никогда бы не додумался.
Бьёт.
Надо было сначала пробку просверлить, зажать болт,
в шурик и обточить пробку,
а уже потом мотать и клеить наждачку.
Ага, и не а сопли клеить, которые при нагреве поплывут
Great idea! I live on winery row (it’s way out of hand here) in central Texas, and have large trashbags full of corks, and no I don’t drink! 😂 I make topwater lures, among other useful things. Going to add this, and some other modifications for buffers etc. to my list. Really appreciate you sharing your ingenuity. Happy New Year! 👍👍👌
Молодец какой, я не додумался 😊😊😊
Есть приспособа лепесток, без этих заморочек, и работает супер!
Dude you are a genius
Очумелые ручки
Если термоклей не отклеится (не допускать нагрева) - вполне удачная идея.
Криво просверлил, нужно было зажать сверло, а вращать пробку.
Не смущает что это будет нагреваться и термо клей не будет держать 😂
Нобелевскую премию в студию
Lo encontre genial te felicito...
Excellent idea. Far cheaper than buying sanding drums.
These won't last 5 mins buddy.
Soon as he started using hot glue I knew, engineer. But then when he started drilling a cork... Genius.
It's not rocket surgery. It's an ok idea but not genius.
хе р-н ч
It's cheap enough, I'll just buy it.
хорошая приспособа,пригодится.👍
Да, только как спермоклей нагреется всему пиз*а
@@andyvillage6857 ,спермоклей использовать не будем,я подумал что можно сделать на липучку.
Awesome an actual tool thats useful . Maybe the first video like this that's actually worth the watch
Or you go buy one for $3 a save time and supplies that are worth more 😂
@@henryhenry3832 You'd be the type to save a cork ,a piece of all thread and 2 washers and nuts huh.
A dollar saved is a dollar earned.
@@henryhenry3832 or you don't know how big of a wast of money buying crap like this is when you have 200ft roll of sandpaper laying around
@@Aprilfool4121 only if you’re time is worth nothing, mine is worth $115 per hour, so I would rather buy a $3 flapper wheel and save my customers a lot of money
@@henryhenry3832 you do you dude.
Been doing this for 20 years . Should leave a longer tail on sandpaper for longer before it wears out
Clever, very clever, my friend! Thanks. ✔
tightening the nut expands the cork to grip the abrasive tighter. good one
Putting the device in a drill makes the hot glue melt. A roll on emery paper and some elbow grease saves a lot of time
@@turboduckhead6179 Copied from existing drum sander sets.
Где же вас, таких гениев находят???
A great idea..
But unless you have a load of pipes to clean up it's easier by hand.
But the idea is great and simple and I'll use it for other sanding jobs that will be more suited to this type of sanding wheel.
Well done and thanks for the great video.
Jim let’s be honest, you’ll never use this idea. You’re a nice guy Jim, But you’re not nice enough to use this idea. Jim have a good 2023 my good friend
Ideen muss der Mensch haben👍👍👍👍
Сползла за 2 сек использования збс
By the time you make this you could have had the entire project done!
после таких операций можете попрощаться с подшипниками шпинделя и муфты. шуруповёрт это долго терпеть не станет, он все таки не на это рассчитан.
Мастерское рукожопство. Нагревающуюся шкурку термоклеем
Good wine choice !!
Wow.👍
This is very helpful thanks
Thank you for reminding me I have to call Spectrum cable
Lmao the pause before the thrust.
Wow! Wonderful idea!
Neat....just what I need for tomorrow ,
Quicker and Cheaper to buy than to make.
Есть намного проще решение. На заводе мы называли это - вертолёт)
Excelent
мамкин инженер в деле)))
A 1965 hack !! Awesome dude!
Пробка вращается,а шкурка на месте ,поэтому не забудь клей
Есть способ гораздо проще. Делаем на шпильке продольный рез болгаркой. Вставляем наждачку в разрез и наматываем ее на шпильку. ВСЁ. Ну и естественно потом в шурика вставить.
хрень, нагреется и отклеится!
Well done 👍
вот чем займусь на выходные, только бы в пятницу пробку не потерять
There's a lot of households in the USA with plenty of wine corks
فكرة بسيطة وسهلة وحلوة..
Стык нужно делать по диагонали и лучше без нахлеста, и не на термоклей
Идея хорошая, но термоклей не подойдёт, потому что нождачка нагреется и клей расплавится,
Pooh - everytime before work I have to empty a bottle of wine???
only problem is once the sander gets hot from sanding the glue lets go.
Know thats a worthwhile tool. 👍
We've all been in the middle of a project and needed something that we didn't have. Sometimes you just really don't wanna run to the store, right? Especially when you already went like 30 minutes ago when you needed another thing, hahaha
This is a great idea if you have all those parts. I love coming up with shit on the fly, it's fun honestly. I'm sure everyone has fabricated a tool they didn't have. This is quick thinking.
I guess beer drinkers are out of luck
Now if I could only find a cork !!! Lol
I could buy that for a dollar at the hardware store
Здорова! Глупый момент. Трубочка с разрезом и лентой наждачки проще и лучше.
даешь термоклей опасным нагревающимся инструментам, претендент на премию дарвина
Пробка в тисках - это сильно! С руки сверлить - тоже... про центровку и биение промолчим. Сопли термические... ой.
Haven't seen a non plastic cork for years.
Трубу проще лентой обвернуть и ручками
Сначала купить бутыль вина чтобы появилась пробка. А далее... дануНах эту самоделку, надо идти за следующей.....
Better to cut a slot in the cork, thread the sandpaper in and wind it round so there's a loose flap. That will sand any surface and just trim it back when worn.
* slot in the bolt.
без спермоклея никак 😆
Too cheap to buy a Dremal - I got this!
That's awesome
Yes a solution to a problem.
Я один ждал момент когда ему в лицо отлетит вся мамбаебина?)))
Wow you just created a Dremel, congrats they have only been out for 30 yrs
Zajefajny pomysł 👍🇵🇱
Heat gun glue will melt when heated 😂😂
В ручную быстрее обработать края трубы
Ты лучше покажи, как ты шурик ушатает через 15 минут работы такой приспособой!
Now I good reason to open another bottle of wine. 🍷
I would have had that pipe sanded and done in half the time it took to make an attachment for the drill. With - dun dun dunnnn - my hands.
Great idea
Биение пробкового цилиндра при затяжке ...
Cool !👌🤠