Alcohol burner with remote feeding
Вставка
- Опубліковано 19 жов 2018
- - 2:42 I made the threads in the aluminum tube just using a bolt. There's no need for a thread tap;
- I did not use substances to sealing or any type of glue. The parts are simply fitted firmly;
- Only the burner and part of feeding tube get warm. The reservoir remains cold all the time;
- Pre-heating is needed;
- The cotton wick limits the alcohol flow;
- All the parts are basically garbage - an empty deodorant spray, tubes of an old aluminum antenna, a cotton rag or wick and bolts.
I liked your idea about how to build a burner. Can refill and reuse the alcohol instantly. Smart. Made one today.
A big thank you for not putting rubbish music over it to try and make it more exciting
God, I just love all these clever, simple, smart things people do. Excellent!
Excelente. Felicitaciones y saludos desde Mendoza, Argentina.
Super simple super Sleek design every trap house should have one
🤣
سوخت.این.چی.است.نفت.الکل.چی
@@alirezajandaghi663 Alcohol
Pro-Tip: Be sure to EMPTY the can before slicing into it!
Why ?
@Roderick storey thank you for the kind and detailed response.
Red Hunteur f
This sounds like a story I want to hear
🤣🤣🤣
Great little burner mate well done so easy to understand but not a word said I'm going to give it a try
Perfeito o vídeo, principalmente por não ter aquelas músicas insuportáveis como os demais, parabéns pela ideia e pelo vídeo!
That was actually a cool design.
Love it. Little Bunsen burner
Bunsen
I see a lot of potential in this burner. Very creative.
one of the best DIY stoves i have seen ,
Es sublime...perfecto..prolijo..detallado..
Buenisimo capo...
Parabens!!! Muito bem feito e ótimo resultado!!!
Great little burner. Next step is to make a little tripod stand to hold a little pot. 👍
4 years later I'm here admiring
Interesting idea of using a bolt as the tap. It looked like a hardened grade 8, so it's easy to see how it would cut threads into an aluminium tube. With this setup, I bet you could use any volatile fuel; from petrol clear to mineral spirits.
Even trimethyl borate and diethyl ether!/j
I would certainly like to see people try that (safety, that is)
Petrol’s a bit too volatile for my thinking 🔥🔥🔥but there’s a variety of the usual fuels that this could use.
Excelente! Teu projeto de alimentação remota resolve o problema dos micro queimadores de bolso, para camping, que mal aquecem uma frigideira.
Excellent Job!!!
Thanx for a great idea.
Waiting for more of your vdo's.
Excellent workmanship!
it looks very efficient, can the screw at the end of the antenna be used to control the flame if the screw is made longer to cover the holes?
Sir this is so useful specially if you love to go to the mountain/hiking like me nice idea sir. God bless
Absolutely brilliant in it's simplicity.................................
Outstanding ! I bet you enjoyed the first burn !
E eu aqui me achando com minhas latinhas de Skol kkkkk, parabéns
Wow that's one efficient stove I'm making it this coming week awesome job bro I'm loving it
Бесполезная вещь, плохая производительность и маленький коефициент полезного действия
Thread cutting was ingenious.
You are a very clever man,good little alcohol burner liked!
Foi o melhor vídeo do tipo: "Faça você mesmo". Show. Muito bom. Parabéns.
I know im asking randomly but does anyone know a tool to log back into an instagram account..?
I stupidly forgot the password. I would appreciate any help you can give me.
@Juelz Dante Instablaster =)
Muito bom, ta de parabéns 👏👏👏👏👏👏👏👏
I like how mostly hand tools were used, very easy to replicate
Eine wunderschöne Lampe mit einem klassisch, scönen Design. Super gemacht.
May need a cover that for alcohol evaporates fast.
I worry that it may interupt the alcohol flow.
@@rjpena6273 it should not due to the wicking material used in the feed pipe.
@@acepairfecto5597
Try googling it.
@@jackbquick123
... uhh the reason why I said that is becuase flamable is dangerus and I dont want to give sugestions that im not sure about. Especially if its that hazardus.
Hey bud no need to delete your coments people makes mistakes but what makes us human is that we acknowledge and admit our mistakes.
Gostei.. muito prático.. parabéns pela ideia maravilhosa... legal mesmo.
.
Simple tools, amazing.
Bravo. Simple and efficient. Good "how to" vid. as well. 10/10
Orange flame means needs more oxygen holes and a piece of aluminum can slider to adjust o2 Intake
Es verdad.
Ok i know. Why burne my House?
Sorry.
Use the endbolt to regulate vapour supply was my idea on it.
All I kept thinking was it needs an adjustable air intake valve..to make it come alive. Pretty cool still
Just shorten the chimney so it's not being choked way through
Ótima ideia! Gostei. Valeu!
Tbm achei muito bom, faz tempo que queria fazer um fogareiro alimentavel.
Isso não é semelhante a uma turbina de jato?
@@enzorosa5999 também achei já vi alguns vídeos de turbina é muito semelhante mesmo 👍
عزيزي اقرأ تعليقى واعلم مدا خطورته على من يستخدم هذه الطريقه غير امنه تماما على من يستخدم هذه الطريقه بالفرض لو طفل عبث بهذه الشعله وسكبها على الارض او على الطاوله الماده المنسكبه ستحدث اشتعال لا يقدر عقباه
@Red Dunkey o nome do canal é foguista
Very good 👏👏👏
Well done, don't listen to the useless reviews, it looks great
This similar to bunsen burner used in chemistry laboratory during test tube chemicals. Indeed great modification for its simplicity and functionality. Great gob..
How about using the nut at the end as a flow regulator? Tighten to lessen supply, wind out to increase.
And an old plastic bottle can be used as a cover/peep for the reservoir to prevent evaporation and allow checking of fuel level.
Talvez a própria tampa do spray possa ser usada no lugar da garrafa de plástico como sugerido por @old Navajo Tricks
Scusi, no hablo espanol mi amigo.
Красиво и аккуратно. Молодцы молодежь
Very clever design !
Simples, fácil e perfeito. Parabens.
Wouldn't some kind of lid help as alcohol fairly quickly evaporates? I mean if you were using this device overnight or something
Я тоже о крышке подумал )) Но сама горелка мне очень понравилась. Лучше чем из пивных банок. И топливо всегда можно добавить. Идея супер 👍
Show de bola. Parabéns.
Very nice build 👍
Thank you for your success
Ganhou um inscrito parabéns que vídeo legal
All fine and dandy until you take a sip and your hair catches fire.
Sensacional. Parabéns !!!! 👏🏻👏🏻👏🏻👏🏻
Excelente quemador, muy bueno!!!
Encontrei o meu fogareiro a álcool perfeito!
Obrigado foguista e!👏🏾👏🏾👏🏾👍🏿
When the end of the world is here......
I hope I find you to be a part of my team.
Nice elegant design.
Great job! Nice video!
Bacana,bom pra quem esquenta marmita
Kkkkkkk!
Про спиртовку из школы, я чуть со стула не наеб... ся!! Давно так не ржал-зачёт парень!
CYKA
Excellent idea for my dental laboratory. Thanks
Parabéns, engenhoso e útil.
Неплохо, только ёмкость с спиртом надо закрыть крышкой, чтобы пары топлива случайно не загорелись от пламени горелки
Да и тупо не испарился
O projeto é ótimo, mas e o álcool que fica evaporando no recipiente ao lado? Não corre o risco de incendiar o lugar? Não deveria ter uma tampa ou uma malha de aço pra prevenir acidentes?
Dom Lobo bem pensado...
I was thinking the same thing
(Inglês)
O medo que fais e o tubo esquentar e pega fogo no outro
Tampra prs te ver a explosao que da kkkkkkkkkkkk o tubo é aluminiu .Isso é apenas o começo de um projeto que precisa ser aprimorado
@@MateusSilva-gh9se Por isso eu falei em uma malha de aço, como a lanterna Davy, que serviria pra impedir o fogo de chegar no álcool sem gerar a pressão necessária para uma explosão.
Até porque uma tampa pura iria criar vácuo e impedir o álcool de passar pro tudo menor.
Superb design!
Absolutely love it!!!!
Parabéns ficou top das galáxias.
This guy is in desperate need of a Dremel.
*Game Changer*
He cut it quite neatly tbh
@@RAPPATENGO He did, absolutely! But time is valuable and a Dremel would have made the cuts and drilling short and easy.
@@AOMartialArts gay
@@AOMartialArts man up
@@suprememasteroftheuniverse Odd comment.
Que coisa linda e que delicado ficou! Amei!💚👏👏👏😍
Cara parabéns! ficou muito bom!
мы берем крышку от банки, наливаем спирта(первак-отходы 95%) и поджигаем на столике в беседке, далее в щели стола вставляем по обе стороны пару раготуль из веточек, одну веточку по толще чистим это шампур, нанизываем на него куски сосиски/сардельки/мясо мариновонное и крутим сидя за столом. шащлык готов))))
Inteligentíssimo !!!
How long could X amount of alcohol burn for? Thinking in terms of a light source.
Nice burner!
great stuff.
not a word said but 100% understandable.
can the flame be tuned to output blue?
i think you can place the bottle higher and add a control valve to it.
you can also make the can pressurized
@@r0_ i was thinking more along the lines of better tunning.
thats plenty of heat if you can get
more blue
I was kind of thinking that it wasn't burning very clean. Cause I have a marine alcohol stove. It burns a faint blue, unless the burners are dirty. If dirty, it burns bright blue with orange tips.
@@jadekayak01 I would think if you drilled another set of holes in the big tube, it would flow more air and burn leaner.
@@dustinshort6207 i dont know.
my experiences with gas has been rather explosive
о, керогаз изобрели )) Впереди - примус!
Симонов жаль нельзя тебе классов больше поставить. Смотрю эту хрень листая коменты и думаю:"теперь понятно как кирогаз работает, примерно" и, о чудо, твои комментарий. Реально дебил автор ролика, или те кому он это предназначил.
Ottimo lavoro! great work
Great work.
Сверлить сверлом без дрели и нарезать резьбу болтом-ну просто заебись!
Oh man ! What a nice thing , I wonder if this could be used in a model steam engine,it with be cool!
Loved it lotrrally. It looks nice.
That is cool! Idea, a thick aluminum bottle with a wide mouth with screw on top. Place a presure valve close to the top on the Aluminum bottle that you can connect a hose to feed a burner. Design a craddle for the Aluminum bottle were you can place a candle and place the bottle on top. Connect hose to burner and bottle fill with alcohol and light candle place bottle into craddle so the candle can heat the alcohol and build vapor that is then released at a steady feed to the burner were you can adjust the flame. Even a soda can stove for the bottom of the presure vessel would work way better. Been thinking about this awhile do you think it would work? 😊
Gostei, mais poderia ter informações da medida dos parafusos, comprimento do cabo ( bitola) e etc. Ficou legal.
eu acho q n precisa mano, deve ser modular. vc coloca o tamanho que quiser.
vc pode até colocar uma lata no lutar do desodorante , pra aumentar a autonomia do fogo.
Parece com um cachimbo de cracke kkk
A válvula do encanamento do queimador do fogão e o caninho d alumínio da certinho, o caninho já está pronto cm a válvula é só conecta no recipiente e fazer o queimador...
Sensacional! Parabéns! Muito útil mesmo.
Beautiful.
Muito bom esse esquema. Mas quanto tempo dura essa quantidade de álcool? ??
Человек сделал своими руками фирменную вещь , а вы из консервной банки тяп - ляп как всегда делали, если делать то делать вещь чтобы было красиво и хватило надолго
Эта вешь называется наркомания!чему он тут научил?пиздец открыл инштейна
Welcome to another episode of
Why is this in my recommendation
Todays episode, how to make something worthless!
@@pwnely worthless to you or worthless to everyone? I don't know about you but fire that has constant fuel is pretty useful. Could use this to cook food.
They're preparing you for the Apocalypse.
@@jirizary73 that's actually the nicest thing they've ever done!
pwnely
Not really worthless, this could prove useful for camping, road trips or (worst-case) in a SHTF scenario where you might not exactly have access to normal stoves. Plus, it’s always neat to learn something new, and to make something for yourself.
This is very good! I also want to make this!
CONGRATULATIONS FOI UM DOS MELHORES FOGAREIRO OU ESPECIE DE LAMPARINA COM ÁLCOOL PARABÉNS
Boa ideia dá para economizar gás
-Пол литру, вдребезги?! Да я тебе за неё!!
Ахах )))
E oqueee
Есть же и отходы производства, - это головные, и хвостовые фракции.
@@user-ik4ek6fy2f Вот только не надо на больную голову 🤕
This is super awesome. Very creative. Thanks for sharing! I have a question. The bottle cap was used to start it. Is it difficult with a match or lighter? Or was that for initial starting?
That's just initial starting. You could do the same with a match, but you would 1) blow thru all your matches getting the alcohol to a vapor state, and 2) burn your fingers off.
Good work
凄くイイ感じですね!!
欲しいですが自分不器用なのでよー作りません=3
1:41, 3:55 Who needs drills?
1,00
с помощью кувалды,отвёртки и mather fuck сделаем что угодно, а то показывает у него там и токарка и Гриндер и болгарка и сварка и до ебени всякой всячины, а он блядь, ножик делает,и то, блядь, неправильно
Here is BR kkkk
We don't need drill
Excelente idea! Buen video
Well done!
👏👏👏 show 😎
Que maneiro véi. este fogo ai fica quanto tempo ?
Até o álcool acabar fera
davi david
@@raimundoferreirahilario5067
Depende de quanto coloca
nunca acaba desde que abasteça mané
Nice idea