Це відео не доступне.
Перепрошуємо.
DASH MOD MASTER CLASS - iPad Air 2019 Toyota Tacoma
Вставка
- Опубліковано 8 сер 2024
- Enjoy our dash mod master class! Mod like a PRO! Estimated project time is nine to twelve hours. Dash kits and wiring info at SOUNDMAN.CO #cars #mods #howto
TIME STAMPS
0:00 - introduction
0:09 - project overview
1:15 - STEP 1 - disassemble dash panel
2:58 - STEP 2 - prep the kit
7:42 - STEP 3 - trim dash panel to fit the kit
11:12 - STEP 4 - glue the prepped kit to the dash panel
13:57 - STEP 5 - create transitions and epoxy seams
20:59 - STEP 6 - grind dried epoxy and sand entire panel
23:20 - STEP 7 - apply fiberglass filler and body filler
25:32 - STEP 8 - sand filler to shape
26:57 - STEP 9 - “glaze” small imperfections
33:00 - STEP 10 - paint and clear coat
34:50 - STEP 11 - glue dock connector and suede, then assemble
MATERIALS AND TOOLS (in order of appearance)
- Soundman SIDE SLIDER iPad dash kit - soundman.co/products/carmount
- 90 degree usb-c connector - amzn.to/3ydyCVW
- Jessem router lift (optional) - amzn.to/3Jdjoq0
- Flush trim router bit (optional) - amzn.to/3ZDIdRj
- Intertape 591 (optional) - amzn.to/3EWDp1y
- Safety glasses - amzn.to/3mtAdEc
- Dust mask - amzn.to/41Jbw75
- Dremel - amzn.to/3YktjOP
- EZ lock cutoff wheel - amzn.to/3Yq2F7g
- Dura-Block sanding blocks - amzn.to/3kQe0zV
- Sand paper roll 120 grit - amzn.to/3ZEvUUQ
- Milwaukee angle grinder - amzn.to/3mt05jv
- 3 inch, 40 grit grinding disc - amzn.to/3muCsqP
- Gorilla gel CA glue - amzn.to/3yejck2
- ZAP Zip Kicker, CA glue accelerator - amzn.to/3ISu4sY
- Needle tip bottle - amzn.to/3ydDJp0
- ABS plastic sheet - amzn.to/3yek8VA
- JB Weld Plastic Bonder - amzn.to/3ET800c
- Mixing tips - amzn.to/3JdlvdD
- Bondo Glass - amzn.to/3YmCPAY
- Bondo High Bond Filler - amzn.to/3YkJITA
- Cake lifter, filler mixing board - amzn.to/3ZBvNcQ
- Spring steel body filler spreaders - amzn.to/3ZkE70T
- Makita palm Sander - amzn.to/3ES9xUb
- Fiberglass resin - amzn.to/3INwedb
- Transtar 2in1, high build primer - amzn.to/3kIcC2n
- Bondo spot putty - amzn.to/3Yu0IHe
- Rust-oleum Professional flat black - amzn.to/3yb7qa3
- SEM satin gloss clear coat - amzn.to/3IMoQip
- Paint mask - amzn.to/41Yhilx
- Super 77, spray glue - amzn.to/3ZItuVc
- Sand paper grits, 60, 120, 220, 320, 400
First I want to say I am the owner of this dash panel and couldn’t be FREAKIN MORE STOKED OF THE JOB DOUG DID! Watching this video of my iPad dash being built was awesome. Doug your attention to detail and time and care you put into these iPads dash mods speak for themselves in the finished product. You would almost think he was building the dash for himself or a member of his family with the level of care he puts forth. I have had the dash for about a month now and absolutely ❤ it!!! I have had so many compliments on it with some people actually believing it was a factory add on because of Dougs superior craftsmanship. All I can say to any of you reading this if you are on the fence getting Doug to mod your dash dont wait a second more, it is super worth every penny!!!! I want to think Doug for taking the time to make this video and including my dash, like I said before it was amazing watching my dash built and the care Doug puts into these mods. Also I want to think Kelly, Doug’s wife, for answering every one of my emails and keeping me up to date on the progress of my dash mod. One other quick thing I wish I could put up a pic of the box that my dash was shipped back in. You would have thought that they were shipping the most rare artifact in the world with the amount of padding that Doug shipped my dash back to me in. Honestly I believe it could have fell off the UPS truck got ran over and still been in perfect shape it was shipped so protected, LOL!! THANX AGAIN DOUG!!!! ONE BEYOND HAPPY CUSTOMER HERE!!!!
I will have to make a pic of it, but its crazy he used that much padding
How did the hole Doug cut match with the factory radio?
Do you have socials with finished pics of it? I have a 2019 also and want this done so bad!
Does the ipad have reverse camera?
How much did he charge you?
WHAT UP DUDES?!?!!?🙌🙌🙌 View time stamps and material list in the video description. Let me know what you guys think of the new how to video! See you all again soon!!
👍
This is industry. Can't stand the poser Amazon salesmen
You need to use Epoxy Clay that will replace all the steps you are doing as you can sand and build out everything and no need for the plastic or bondo !
Great walk thru!
All we needed was the added sound effects on the finished product!!
It's always really impressive to see your finished products in your Shorts but to see the process broken down is even cooler.
I've been watching your channel ever since you were in the first shop. Always dig the content. Keep it up, Doug. ✌🏼
THANK YOU 🙏
@@soundman_caraudio I’m interested in one of these for a 2017 Toyota Tacoma want to keep the oem touchscreen behind the iPad are you in California?
@@miguesgarage4800 email me for a quote at install@soundman.co
Commenting for the algorithm and to say it must have been super hard for Doug to spend the entire video being so professional. I know he wanted some jokes thrown in but he bit his tongue.
Love the new format! I love how your never static, even if you take some time before your next video it’s usually because your switching things up in your process to see what works best. Keep it up Dougie! I’ve watched your videos for years and will continue to because your content is always evolving!
Dammm , shit is crazy the amount of work that is needed to reach your level . Don’t think people really realize the love that goes into it . Good shit bro.. keep it up
Absolutely INCREDIBLE job! I greatly appreciate how you take ZERO shortcuts and make sure this job isn't done until everything is PERFECT! Instantly subscribed after watching this! Thanks for creating and posting!
Great tutorial, I really enjoyed seeing you work the kit and telling us how to problem solve issues that come up
Damn dude, that looks amazing. I appreciate your level of attention to detail. You the man Doug.👍
Now that is a soundman video of old times. HELL YEA BROTHER!!
Quality video Soundman...I'm old enough to remember Camera Boy...those were the days...kids grow up so fast...again very nice how to...
That turned out really nice! I was skeptical in the beginning and was thinking, “why not just get a smaller ipad?” Because of how it covered the vents but you definitely made that look like it belongs there. Good work, Mr. Soundman. 👏
I was thinking the same thing. But it looked awesome and professional.
Perfect job!
The final result looks amazing.
I love this. It's the first time seeing you serious and breaking down your craft. I truly enjoyed it. Thanks for the education.
Exceptional work, Professor Soundman. You really churched it up, too.
Doug appreciate you taking the time to do this step by step session thank you
That was the best damn episode of Soundman I’ve seen in years. And don’t take it wrong I’m a huge fan. You’re very funny. I just really enjoyed learning these steps. Thank you!!
Great work Doug. Me and Russell just watched this episode together and we both think this is the most professional video you've ever made
You are a true artist, I always enjoy watching your creations come to completion. Thank You for teaching us!
That is looking so good! You are the dash mod wizard! GOD DAMN!
Stunning workmanship, and superb end result. I love the way you present these guides.
This is an amazing video! Thank you for the in depth look at the incredible work that you do!
Great video Doug! Don’t know how I missed it. But VERY informative and great watch !!
Honestly, I like any video you do so any notification from Soundman is a good day!
He's back!!! Thanks for the total break down of doing an ipad dash!
Dude I've learned so much from you and the whole gang shit, since 7 yrs ago at the shop that got turned into an autozo and to watch the whole journey. This was the best video yet. 👍the dash mod came out sick as always 🤘rock on dude
Who would've thought I'd one day be using you as an educational resource? 😂 Not me a couple years ago. Good stuff giving inspiration for how to takle intalling a 2 din in my nissan 720
Ive been waiting for a in depth vid on dash mods..go ahead Sensei!..eyes wide open👀
Master at work. Turned out beautiful.
Great episode Doug. Love watching your process.
Damn that's some good work. Love the breakdown and watching you go through the process of doing one of these custom dash mods. Came out clean bro looking forward to seeing more!!
Awesome job! Looks fantastic!
I hope to one day get my whole car stereo system done by you. I trust and believe in the SoundMan way🔥
You will learn my young padewan….you will learn…And you’ll miss your car for about a year!!!😂😂😂
Worried when I first started watching video. Giving away all your secrets? But guaranteed no one‘s gonna come close to your skill and technic. A++
This video was awesome bro! I'd definitely watch more like this! Can't wait for the next upload!
Wow it was conducted very professionally :P Happy to hear a few, "Oooooh" moments. :)
the best doing what is the best ,perfect work always 💪💪💪👍
This is what I needed today. Thanks!
OH MAN! I can’t wait to have my Sound man I pad kit installed into my truck. MAYBE THEN my milk shake, will bring the boys to the yard. ❤
I've followed you since the beginning and you have always done a damn good job !!!
dude your a master at that and hope you and your family are well God Bless
Love your work Doug!
This was a great vlog Doug and the dash came out great ✌️
AMAZING DASH!!! I LOVE IT DOUG!!!!
I love watching you close large gaps.
A kit that you could use to improve the strength of the bond is one of the hot plastic weld kits that utilize the little wires that get melted into the material. Just a thought for added strength and improved bonding for longevity.
So SICK! Amazing attention to detail! Looks OEM
It matters what you do Doug! Master indeed.
Thank God a new video great work doug
Great work as usual Doug, just a slight hint of the old Soundman in there🤙🏼🤙🏼🇦🇺
G rated Doug. Top notch work.
Super skilled af! Amazing outcome. Id love 1 for my Lexus GX470 haha
Simply amazing work sir.
Looks great! So much work but the end result is worth it.
You are a master. Awesome work.
That craftsmanship is world class. Keep up the good work! Now can we resume back to regular bullshittery please 😁
The Man, The Myth and The Legend, workin his magic.
one of the best fabricators in the game
Awesome as always!!
A true work of art buddy!
there is only one soundman, super work
We got serious Dougie here in this one. Master of his craft at work.
Toyota couldn't have done it better! That's a sweet mod!!
Great turnout Doug!
Nice work. I enjoyed this style of video!
Great how to video Doug.
Man, you make this shit look so easy. Great job!!! keep up the great work.
Damn Doug!!! You're an Avenger! 💪🏾
Awesome video. Kind of miss the fab kitchen jokes though not gonna lie.😂😂😂
Nice work! It looks freaking amazing...but...it doesn't matter what you did Doug!
I watch ALL your videos for two reasons, fabrication wisdom and you're funny AF.....guess what this video was missing? I want more vids BRO!!!
So awesome watching your content like this!!!!
You are an incredible dude!!
Your attention to detail is amazing. I wasn’t expecting it to look as factory as it did when you finished. I can’t imagine how much this cost and the amount of labor hours put in.
So clean!!
Awesome work Douglas! I must admit it is tough hearing you say STRENGTH like a normal person. I prefer the jackassary 😂 Great video pal!
I hope you're charging $10k+ to do these, brother. I can't imagine the amount of time you're putting in for each one. I wash the exterior of houses with bleach and a hose at $200-$500hr (depending on the customer) and literally ANYONE can do it. You're skills are literally up with the best in the world, so hope you're charging right.
All the best, brother. 10/10 work.
Beautiful work!
Damn, that turned out nice!!
Awesome work. Thanks for the video.
Literally have to be a master to do this.
Nice vid. Clean.
looks good. like it was made for it!!!
Shit looks great 👍. Always enjoy watching the work. Been here for years keep it up
Try using an oscillating tool, you’ll be able to do those sweet plunge cuts.
Great video
Love the step by step process on fabing up a dash kit! It's stunting!
Will you be at Slamology? I'll 👀 you there:)
Top quality as always 👌
The Bob Ross of auto body work. That’s a lot of work.
Dang Doug what's going on my brother from anotha motha. You are the master painter especially when it comes to spraypaint
Top Notch Work!
Best how to video!.
you did it Doug
Nice work. But I like the funny remarks you always got lol.
Nice work shits clean af but we need more bass van vlogs
Wow. Leave it to the Pro! 👏
Great job e the only thing I don’t agree with is you need to sand the fiberglass before you put body filler on. I guess what works for you
Dude you know WTF you're doing. Looks great. Love to see a follow up with pics or video of it installed.
Looks like it was made for it!
Where you been Doug😁missing the vids