Installed a new steering wheel (with paddles) on my Mercedes C250 C300 W204

Поділитися
Вставка
  • Опубліковано 3 сер 2017
  • Mercedes Benz C Class C250 C204 How To Video
    For the Mercedes C Class W204 2008-2015, this is a step by step guide on how to remove, change , upgrade your old steering wheel and install a new steering wheel.
    Stock brown steering sheel was sold on Ebay for $150
    Slightly Used flat bottom black steering wheel with paddle shifters purchased on Ebay for $200
    Net was a $50 cost to upgrade my steering wheel. Thrifty!
    DISCLAIMER: This video is NOT endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.
  • Авто та транспорт

КОМЕНТАРІ • 116

  • @TheFlexxGarage
    @TheFlexxGarage  5 років тому +2

    FOLLOW ME!!!
    Instagram: instagram.com/Flexx_Alexander
    Facebook: facebook.com/FlexxMercedesAndCoolCarVideos/
    Facebook Group's you can find me:
    W204 Mercedes Benz - ENGLISH SPEAKING ONLY
    facebook.com/groups/902641223170836/
    Mercedes W204 Addicts
    facebook.com/groups/1007957369220326/

    • @darluisrm
      @darluisrm 2 роки тому

      I just did all as you said but for some reason the buttons and the horn is not working.

  • @mike230373
    @mike230373 5 років тому

    Thank you. Your video gave me the confidence to replace the wheel in my W205 C63 Cab myself rather than paying someone to do it. Keep up the great work.

  • @SebastianGaticaMoris
    @SebastianGaticaMoris 6 років тому +1

    Thanks for your detailed explanation (and for doing it straight forward, not never ending comments and introduction) :)

  • @alexandercarnegie1175
    @alexandercarnegie1175 6 років тому +3

    I LOVE YOUR VIDEOS PLEASE DONT STOP

    • @TheFlexxGarage
      @TheFlexxGarage  6 років тому +1

      Alexander Carnegie, I'm just getting started. Lol. I won't be stopping anytime soon.

  • @caesaraugustusnthlegion6217
    @caesaraugustusnthlegion6217 5 років тому +1

    great amazing detailed video thanks!

  • @hasaelmonty7531
    @hasaelmonty7531 3 роки тому +1

    Thanks pretty awesome very informative

  • @marcellusrgiovanni370
    @marcellusrgiovanni370 6 років тому +1

    I’m doing the same today , I need to take off PPP wheel and install a 507 wheel (full Alcantara) then put the PPP on my brothers c63 which has plain wheel 2 lots of jobs

  • @popeyedamc
    @popeyedamc 2 роки тому

    There are Allen sockets 3/8 drive, u can use to remove steering wheel mounting bolt.

  • @gregorini59
    @gregorini59 4 місяці тому

    Hi, old video I know but I've just done this and everything worked perfectly - great tutorial thanks. The paddles work when the car is put in manual mode via the stick, so try that if you've done it and think the paddles aren't working

    • @TheFlexxGarage
      @TheFlexxGarage  4 місяці тому

      Yes, that’s how paddles work on most cars. You need to put the gear or transmission into “+-“ manual mode. It’s the same thing with my benz, a4, and R8.
      However, if a car didn’t come with paddles and you install a steering wheel with them, doesn’t automatically mean they will work. Some cars require programming to unlock the feature and some cars just won’t allow paddles cause the transmission isn’t designed for it.

    • @gregorini59
      @gregorini59 4 місяці тому

      @@TheFlexxGarage thanks, I've been in some that haven't needed any activation. The Audi A3 TFSI and Seat Leon FR I've had just needed a hit on the paddle and manual mode is activated, but the old lexus and Toyota I had did need the activation on the stick. Maybe it's a VAG thing!

  • @diamondhill11
    @diamondhill11 3 роки тому +2

    Great video, i followed the instruction and everything work fine, except the there is a message " Front Left Airbag Malfunction" appear. Do you know how to fix or reset the msg ?

  • @donovanh5679
    @donovanh5679 2 роки тому +1

    Hi Flexx - I have a 2009 Mercedes SL550 and like to replace its steering wheel with a new one. I wonder if the procedure is similar to the steps as shown in this video?

  • @WorkHardPlayHardTV-1
    @WorkHardPlayHardTV-1 6 років тому +1

    Great video

  • @The_McD
    @The_McD 5 років тому +4

    Is it too difficult to use Allen with drive socket?

  • @mishaellemuel1264
    @mishaellemuel1264 4 роки тому +1

    hey flexx awesome videos you got going on, you actually made me customise my very own c250 w204 and I have to tell you you got cool stuff here, keep up the good work you do ,coz you make a huge difference in some of our lives, just have one question though how did you get your fog drl to flick like that coz i can't find a video where you show how . thanks.

    • @navarone27
      @navarone27 4 роки тому +1

      I believe that flicker in the drls is from the camera recording

  • @adelstn
    @adelstn 5 років тому +1

    Hi flexx, please help by listing the tools used, if possible where to get on eBay or amazon, thanks.

  • @miladrabiei6685
    @miladrabiei6685 5 років тому +1

    hey flexx i need link for buy this streeing wheel black color
    i didn't found like your streeing wheel
    could you help me please ?

  • @honzazugar
    @honzazugar 4 роки тому

    Great, thank you!

  • @mihalyrigo1482
    @mihalyrigo1482 5 років тому

    Hi!
    Can you help me regarding changing steering wheel in w207? (mercedes benz e350CDI coupe 2010).
    Because I want to change my steering wheel for a face lift one (2012)
    My afraid is that I have no steering paddles/shifters on the steering wheel and the steering wheel I want has paddles and the electronics maybe different in 2010 and 2012.
    For me its doesn't matter if I can use it or not the important is that the main buttons work properly.
    So is it possible to put the 2012 steering wheel (what you have changed in your car) into my 2010 e coupe?
    Thanks!

  • @ryanreynolds7771
    @ryanreynolds7771 5 років тому

    Hello I wonder if this will work on a 2005 Chrysler Crossfire . I love the 3 spoke sterring wheel. in 2005 Mercedes was involved with cHRYSLER.I was so happy back then and then they started with the Crossfire which was rather expensive and used all old Mercedes SLK technology .but charged high prices for the Crossfire. I couldn't afford one then but got this 2005 real cheap $1700 and wanted to do the Mercedes conversion on my Crossfire like sterring wheel. I know my car doesn't have radio button on wheel but the 2005 SLK did .don't know why Mercedes used all old tech on the crossfire. I would love your old steering wheel if it would work on my car Ill need the air bag also . will these work on a 2005 Crossfire.

  • @Aaden637
    @Aaden637 2 роки тому

    Hey flex I have a 2011 Mercedes c350, I want to add paddle shifters. My gear selector has a manual mode in it, will it work?

  • @Rastamanas
    @Rastamanas 2 роки тому +1

    My dad tried to teach me wich side unscrew the bolt, didn't succeed, you did lol

  • @danieldrita5351
    @danieldrita5351 2 роки тому +1

    Thanks

  • @diegocostarica454
    @diegocostarica454 6 років тому +1

    Great!

  • @kboarder21
    @kboarder21 3 роки тому

    Is it possible to upgrade to a heated steering wheel if the original wasn't?

  • @Premier_league_fans_highlight
    @Premier_league_fans_highlight 3 роки тому

    Can this stirring wheel work on any other Benz like the Glass?

  • @zolifn_0037
    @zolifn_0037 3 місяці тому

    Hello, if I want a new steering wheel, does it matter which Mercedes car or custom steering wheel I buy?? To make something equal in size??

  • @ibra00136
    @ibra00136 4 роки тому +1

    Can I use the same steering wheel on my 2008 c300

  • @rachidelhaddad7807
    @rachidelhaddad7807 2 роки тому

    Can somebody explain to me how to replace the pre 2018 steering wheel of the mercedes e class 200 amg 2018 for the new, post 2018 steering wheel? I'm mainly interested in the exact decoding process. And does anybody know which chip card should be used. Thank you.

  • @neilmagtibay2045
    @neilmagtibay2045 4 роки тому

    Does your old steering wheel will fit my w04 mb c250

  • @frankp500
    @frankp500 5 років тому +1

    Hey Flexx. Love all your videos! Hey, what exhaust do u have?

  • @1asosa
    @1asosa 5 років тому

    Hi Flexx
    they sell me a streeing whell CLA 250 2016
    do you think that I got a C 280 2008??
    tnx for your help

  • @RS-zz3wb
    @RS-zz3wb 3 роки тому

    Great Video Easy Swap, just one question. The steering wheel can only go on one way because of the teeth correct? Looks like I might need an alignment to straighten the steering wheel when going down the road.
    Any idea on that?

    • @ohiyou9883
      @ohiyou9883 3 роки тому

      No the steering wheel not go in one way before careful to install the steering in same position make a mark before you remove the steering wheel or your steering will be not straight in the road

  • @yourprivatedriver3297
    @yourprivatedriver3297 3 роки тому

    Hey Flex. Question. I have a 2012 Mercedes E350. The surface of the button modules are peeling off. Instead of buying a new steering wheel at $1300 bucks. I wanted to know if you have ever replaced the button modules on both left and right sides of the airbag? If yes, can you make a video on how to replace the modules, I just recieved mine but dont know how to remove and replace old.

    • @misaka4710
      @misaka4710 3 роки тому +1

      I had a similar issue but I just bought chrome button stickers on eBay and they look brand new

  • @juanca122480
    @juanca122480 3 роки тому

    How can I find the clock spring?

  • @berniecruz8405
    @berniecruz8405 6 років тому

    Flex, Where did you get your seats. They look like they came from the new E class series?
    Do they have lumbar support, heated and vent, as well?
    Could you show a video about your seats, also?

    • @TheFlexxGarage
      @TheFlexxGarage  6 років тому +1

      They were stock in my 2012 c250. They do have lumbar and heat. No cooling vent though.

  • @marcusscott6199
    @marcusscott6199 4 роки тому

    Hey Flex I have a 2013 c250 model as well and the airbag has malfunctioned. I found out there is a recall on the airbags but the dealership doesn't have them available. I can't buy a replacement because they want refund me what I paid and when the new model is available whenever that will be. Any advice

    • @bngr_bngr
      @bngr_bngr 3 роки тому

      Marcus Scott hey the dealers now have the airbags.

  • @ro-leesylvester9545
    @ro-leesylvester9545 4 роки тому

    will this work on a CLS500 benz...would like to change steering wheel to the look of steering wheel like this one in the video

    • @_vindicator_
      @_vindicator_ 4 роки тому

      no it won't because you'll have to recode the airbag's SRS module with xentry after every swap, but he's likely not aware of that

  • @jzarz313
    @jzarz313 4 роки тому +5

    Flexx can I switch my steering wheel to one with paddles if my original wheel didnt? And will the paddles work?

    • @network69
      @network69 4 роки тому +1

      that's what he did in this video...

    • @network69
      @network69 4 роки тому +1

      check if your conductor plate has 4 plugs at the top, if it does you can 100% do this

  • @26juventus
    @26juventus 4 роки тому

    I have a 2014 e350. I want to replace the all black steering wheel to one with the wood trim. Is it very difficult to replace the steering wheel yourself? Iam debating to do it my self or take it to a shop. Your thoughts bro???

    • @randokay3752
      @randokay3752 4 роки тому

      The labors is easy , it's getting the parts right so its compatible with one another. Example : 8pin adapters vs 4 pins adapter on the plugs.

    • @arpadkemeri8666
      @arpadkemeri8666 4 роки тому

      hi 26juventus, not difficult at all. in case your new steering wheel didn't came off the very same car with very same specs you'll need to replacte the electronic/contact plate .... see this video as well to find out how to do that

  • @Raghav88
    @Raghav88 4 роки тому +1

    Struggling with the main bolt. Airbag was a fucking labour of hercules itself!! I've busted two pipes trying to twist the hex key - been sitting without a battery and air bag for 2 days!! Any recommendations?!

  • @darluisrm
    @darluisrm 2 роки тому +2

    I just did all as you said but for some reason the buttons and the horn is not working.

  • @mimidb3668
    @mimidb3668 3 роки тому

    Hi Flex, how are you?
    I've seen many video talking about installing the new Mercedes steering wheel into any old model without any coding required , especially the new CLA 2020 steering wheel is really interesting, could you please share any information about that.

  • @drhombus242
    @drhombus242 2 роки тому

    Theoretically would the brown airbag fit on the black steering wheel?

    • @TheFlexxGarage
      @TheFlexxGarage  2 роки тому +1

      The brown airbag was what I installed on the black steering wheel. I just spray dyed it black to match the new steering wheel.

    • @etka
      @etka 7 місяців тому

      @@TheFlexxGaragethe brown steering wheel different outer shape's airbag fits the new black one u put on?

  • @chrispirvan4969
    @chrispirvan4969 2 роки тому

    You mention moving the contact plate from the old steering wheel to the new one in order to keep the button functions. Are you referring to only the metal cover, or the entire assembly?
    Nevermind. I answered my own question. I simply removed the entire assembly from the original steering wheel to the new, and everything works just like before.

  • @trippyflako2443
    @trippyflako2443 2 роки тому +6

    @flexx I have a stock 250 steering wheel with no paddles , does the paddle function work once you upgrade ?

    • @axelgastelum6484
      @axelgastelum6484 2 роки тому +1

      Have you figured it out bro I have the same question?

    • @aliislam580
      @aliislam580 2 роки тому +1

      no it won't, the transmission has to be programmed to accept paddle shifters as an input, take it to a shop that has the diagnostic star tool

    • @gregorini59
      @gregorini59 4 місяці тому +1

      Paddles work for me if you drop it into manual mode via the stick

    • @Sergebeballin
      @Sergebeballin Місяць тому

      @@gregorini59did you have to wire it

  • @delfinacoffie8394
    @delfinacoffie8394 Рік тому +2

    I need help cannot loosen the bolt to the steering wheel to change it out 2013 C Class 300 Mercedes-Benz can anyone help

    • @gregorypatterson2312
      @gregorypatterson2312 Рік тому

      Did you ever get it loose? You might not be using enough force so don’t be scared to use force.

  • @ConvexRook
    @ConvexRook 6 років тому +1

    where can I buy new steering wheel for 2015 c300?

    • @TheFlexxGarage
      @TheFlexxGarage  6 років тому

      Not sure. I buy my stuff on eBay. There’s usually someone selling something you need.

  • @magic_man3899
    @magic_man3899 2 роки тому

    Hey flexx my c250 doesn’t come with paddles, am I able to get the steering wheel with them and install it to my car? Will it work?

    • @TheFlexxGarage
      @TheFlexxGarage  2 роки тому

      You can but no guarantees it will work. Some people got it to work no problem, some can’t get them to work, some required coding for the car to recognize them.

    • @magic_man3899
      @magic_man3899 2 роки тому

      @@TheFlexxGarage how did you do it with your car? Did it come with the shifters?

    • @TheFlexxGarage
      @TheFlexxGarage  2 роки тому

      mine came with paddles. I only changed from a brown steering wheel with paddles to a black steering wheel with paddles.

    • @magic_man3899
      @magic_man3899 2 роки тому

      @@TheFlexxGarage ok thank you

  • @claudiasgrinders5275
    @claudiasgrinders5275 2 роки тому

    How did you get the emblem to be matte black like that?

    • @TheFlexxGarage
      @TheFlexxGarage  2 роки тому +1

      the airbag was brown. I spray dyed the airbag with the emblem on using a product called SEM

    • @claudiasgrinders5275
      @claudiasgrinders5275 2 роки тому

      @@TheFlexxGarage oh nice! I got some sem trim paint I’ll give it a try thanks

  • @RICHGARAGE
    @RICHGARAGE 3 роки тому +1

    Hey what exactly did you search to find it ?

    • @TheFlexxGarage
      @TheFlexxGarage  3 роки тому

      Just 2012 C250 steering wheel. And I used 2013 and 2014 and also c300 and c350.

  • @nicknick6960
    @nicknick6960 3 роки тому +1

    Did u have to program it after?

    • @koisk4983
      @koisk4983 3 роки тому

      If it’s connected with a wire then no i think

  • @nes286
    @nes286 3 роки тому +1

    Hi, I have a 2013 c250 without paddles. If I upgrade to a new steering wheel with paddles is there any electronic upgrades the I would have to do?

    • @TheFlexxGarage
      @TheFlexxGarage  3 роки тому +1

      It’s kinda hit or miss.
      1) you need to have a hand shifter in the center that allows you to drive in “manual mode” with the (+) and (-). That means the transmission can support “manual” shifting of the automatic transmission.
      2) some cars will accept paddle shifter steering wheels and work 100% with no programming. Some car will require programming. Don’t really know why.

    • @ckjjclan
      @ckjjclan 2 роки тому

      If it doesn’t work, who is likely to be able to do that programming? Thanks!

  • @AurimasMusicMan
    @AurimasMusicMan 4 роки тому

    Hi, Flexx,
    Could you please suggest me what to do. I have another steering wheel, but I haven't the chance to take my old contact plate. Now I have my new steering wheel, but nothing works. Buttons, horn not working :(.

    • @network69
      @network69 4 роки тому

      put the old contact plate into the new one, everything should work

  • @nicknick6960
    @nicknick6960 3 роки тому +1

    Any link where u bought it thanks

    • @TheFlexxGarage
      @TheFlexxGarage  3 роки тому

      Links are in my descriptions. If it’s not there, then it’s not available via a link.

  • @teothekid1
    @teothekid1 4 роки тому

    I think it's time to upgrade to AMG gt steering wheel......

  • @SlipySquid
    @SlipySquid 5 років тому +1

    Where do you get a hundred and fifty dollar wheel from? All the ones I find are like 500-1000

  • @Soliveboi03
    @Soliveboi03 2 роки тому

    What is that tool he using on the Allen key to loosen the steering wheel bolt

    • @TheFlexxGarage
      @TheFlexxGarage  2 роки тому

      It’s just a large pipe. I think it’s a jack handle if I remember.

  • @ucapalot9456
    @ucapalot9456 3 місяці тому

    what steering wheel is this?

    • @TheFlexxGarage
      @TheFlexxGarage  3 місяці тому

      It’s a steering wheel off a 2012 C-class that was black with paddle shifters.

    • @ucapalot9456
      @ucapalot9456 3 місяці тому +1

      Would a 2015 cla 45 steering wheel fit on my 2009 c300 ?

    • @ucapalot9456
      @ucapalot9456 3 місяці тому +1

      Let me know thank you

  • @TheEverLoLMrLoL
    @TheEverLoLMrLoL 3 роки тому

    Hey! Is your car straight piped?

  • @merxb6859
    @merxb6859 6 років тому

    Hello how do you flicker the lights @ 6:10 ? Can you do that to 2013 c300?

    • @TheFlexxGarage
      @TheFlexxGarage  6 років тому +1

      That’s the camera. It can’t record the frequency of the bulbs hence why it looks like “flickers” when in reality there is no flicker.

  • @frederikdahlmadsen9485
    @frederikdahlmadsen9485 4 роки тому +1

    I dont get it. I did the exact same thing with the same steering wheel and nothing is working??? Anyone? No Airbag, No paddles, no light in steering wheel. NOTHING AAARRHHH

    • @TheFlexxGarage
      @TheFlexxGarage  4 роки тому

      If you didn’t change the contact plate then you didn’t do exact same thing in the video.

    • @frederikdahlmadsen9485
      @frederikdahlmadsen9485 4 роки тому

      @@TheFlexxGarage well i did :) And its saying error in the left side.

    • @TheFlexxGarage
      @TheFlexxGarage  4 роки тому +1

      then you probably just have compatibility issues. Not all steering wheels are fully interchangeable...even if it "looks" like mine or if it's stock from another similar car. I've seen some people swap a 2012 C250 steering wheel with paddles into a 2012 C250 without paddles...and nothing works and airbag doesn't even fit right. And some people that swapped out with completely different benz models and years...and everything works 100%.

  • @network69
    @network69 4 роки тому +3

    Having extreme difficulty with that lever it just doesn’t fucking work

    • @network69
      @network69 4 роки тому

      got it! guy don't feel for a lever because it will feel hard and like a piece blocking you from where you think you want to go, just push on the thing blocking it from going straight all the way in and voila!

  • @TheFlexxGarage
    @TheFlexxGarage  5 років тому

    FOLLOW ME!!!
    Website: www.FlexxAlexander.com
    Facebook: facebook.com/FlexxAlexander1
    Instagram: instagram.com/Flexx_Alexander

  • @borikuadecora
    @borikuadecora 2 роки тому +1

    Hey @flexx_alexander, just got my first 204 and I’m trying to upgrade my steering wheel for a 2012 one. Do I need to upgrade the steering column also?

  • @cj_3928
    @cj_3928 4 роки тому

    what exhaust you have