I thought the same, still can't find very many. I liked it, thought it sounded really good. I want their Rotex SF or K version to use on my Surefire rifles.
I have a full size Rotex-X. I'll be honest, It really surprised me. Interesting back note on these. They were designed around M16/C7's gas impingement system. You can run it on piston guns and what not, but it's essentially a RBS before RBS for AR's. So far, I've only ran mine on my 516 10.5. I can say that, yeah, it's definitely made for a non adjustable system. Fist time I took it out, I had my 516 gas system set to Suppressed and it wasn't sending enough gas back to cycle initially. Had to bump it up to Regular for the gas regulator for the fist, idk, 8 or so mags then I was able to switch to Suppressed setting and it still barely cycled, but it did cycle. Unbelievable soft shooting on the Suppressed setting with this can. As far as the sound goes, yeah, there's a 1st round pop, but after that, it was pretty comparable to my AAC 556-SD(which is a tank, minus the QD latch). As for the backing of the ratchet system, yeah, you gotta do that or you're not getting it off, lol. even then, there's a good chance you might remove the flash hider when you go to remove it. Ask me how I know, lol.
That does sound good with three baffles! Does it have a 5.56 bore? I have two Rugged Micro 30 suppressors and they sound good with all three baffles when they’re in configuration. Going into short configuration, with just two baffles, is a noticeable difference in sound. I got a 5.55 flash hider endcap for it, and I’m trying to decide if the extra sound reduction is worth it over the extra back pressure.
Another employee just got the Rugged Razor 5.56 I've been wanting to get out. Especially considering I really like their Alaskan 360. Will hopefully have out sooner than later. Yeah it's one of their 5.56 models. Was really impressed with it. It has me really wanting to at least try if not get their Rotex 5.56 SF or K version. Has their Surefire mount. See them as a better fit for me.
@@Keep_It_Loaded now that they’re made in the US it should come soon. They have great engineering and I think I remember the price being good on most when I believe TFBTV interviewed them.
$600+ on one's currently available through Silencer Shop. Liking the Thermax material so far with my limited use. Obviously like they use inconel as well.
This Compact is pretty sweet and suppresses this shorty well. Not much bigger than the Rotex K. Never had my hands on the Full size. But..... I've never used any other B&T yet to compare it to.
Wow it sounds amazing on video, may end up getting one thanks for the video there’s not many videos on B&T cans.
I thought the same, still can't find very many. I liked it, thought it sounded really good. I want their Rotex SF or K version to use on my Surefire rifles.
Your lab is cold blooded. Mine is a schizo around even suppressed rounds but my Mal will sit like your pup. Good stuff.
Thanks
I have a full size Rotex-X. I'll be honest, It really surprised me. Interesting back note on these. They were designed around M16/C7's gas impingement system. You can run it on piston guns and what not, but it's essentially a RBS before RBS for AR's. So far, I've only ran mine on my 516 10.5. I can say that, yeah, it's definitely made for a non adjustable system. Fist time I took it out, I had my 516 gas system set to Suppressed and it wasn't sending enough gas back to cycle initially. Had to bump it up to Regular for the gas regulator for the fist, idk, 8 or so mags then I was able to switch to Suppressed setting and it still barely cycled, but it did cycle. Unbelievable soft shooting on the Suppressed setting with this can. As far as the sound goes, yeah, there's a 1st round pop, but after that, it was pretty comparable to my AAC 556-SD(which is a tank, minus the QD latch). As for the backing of the ratchet system, yeah, you gotta do that or you're not getting it off, lol. even then, there's a good chance you might remove the flash hider when you go to remove it. Ask me how I know, lol.
Lol, thanks for your experience and insight. Definitely a remarkable brand.
That does sound good with three baffles! Does it have a 5.56 bore? I have two Rugged Micro 30 suppressors and they sound good with all three baffles when they’re in configuration. Going into short configuration, with just two baffles, is a noticeable difference in sound. I got a 5.55 flash hider endcap for it, and I’m trying to decide if the extra sound reduction is worth it over the extra back pressure.
Another employee just got the Rugged Razor 5.56 I've been wanting to get out. Especially considering I really like their Alaskan 360. Will hopefully have out sooner than later.
Yeah it's one of their 5.56 models. Was really impressed with it. It has me really wanting to at least try if not get their Rotex 5.56 SF or K version. Has their Surefire mount. See them as a better fit for me.
Surprised by the lack of videos on B&T on UA-cam. Seems like mostly real short clips. Hopefully mine can help others looking into their cans.
@@Keep_It_Loaded now that they’re made in the US it should come soon. They have great engineering and I think I remember the price being good on most when I believe TFBTV interviewed them.
$600+ on one's currently available through Silencer Shop. Liking the Thermax material so far with my limited use. Obviously like they use inconel as well.
That has quite a bit of flash for being in broad daylight.
Looks great to me, especially considering barrel length. I've seen far worse, especially out of short barreled rifles.
Im interested in the rotex 556 K. Can really find any reveiws on them yet
Silencer Syndicate just made a post with them in it. "K Can Showdown" He wasn't that impressed with it over other ones tested if I remember correctly.
@Keep_It_Loaded thanks. You know the measurement of that compact without the hub??? Looks like b&t is adding hub lengths on their website
@kirkwest6654 oh damn, it's a friend's and was actually in my hand when I sent other reply. No I do not know at the moment
Just got mine, gonna be hitting the range in the next few days. I cant wait until i can actually buy the SF hub
Nice, congrats! Their SF HUB is stinking expensive, lol but I've been waiting to find one available as I think I'm going to get one.
The cool guy looks after every rep LOL. good video though.
How do you like the compact over the full size?
This Compact is pretty sweet and suppresses this shorty well. Not much bigger than the Rotex K. Never had my hands on the Full size. But..... I've never used any other B&T yet to compare it to.
Sounds good from Nebraska 😂
😆 thxs
dog dont need ears? main reason i dont bring my dog.
Have tried a few, and he won't keep them on. He hides in the truck or takes off on ones he doesn't like.