Webasto standheizung thermo top Z C bmw restoration

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • naprawa Webasto thermo top Z C cały proces
    muzyka użyta w filmie
    Alan Walker - Darkside feat Aura and tomine Harket
    Alan Walker - Fadet
    Alan Walker - StyleNothing At all News song 2019
    Alan Walker - The Spectre
    Blackfly
    SeductressDubstep
    Threshold

КОМЕНТАРІ • 38

  • @Atze_Panigale
    @Atze_Panigale 7 місяців тому +3

    Hi Peter
    Kann man dir eine ThermoTop C zur Reparatur zusenden? Wie hoch sind die Reparaturkosten 😄

    • @PioterWebasto
      @PioterWebasto  7 місяців тому

      Witam, tak, niema problemu, naprawa zazwyczaj 100-150 euro

    • @AudiActdi-wv1wv
      @AudiActdi-wv1wv 6 місяців тому +1

      ​@@PioterWebasto
      Hallo Adresse
      Webasto Thermo top C..

    • @PioterWebasto
      @PioterWebasto  6 місяців тому

      @@AudiActdi-wv1wv piotrek1503@poczta.onet.pl

  • @peterzx1475
    @peterzx1475 3 місяці тому +1

    Impresionente. Excelente trabajo.

  • @Waranus36
    @Waranus36 7 місяців тому +2

    With some bulbs... What else?! You are a genius! Thanks!

  • @AudiActdi-wv1wv
    @AudiActdi-wv1wv 6 місяців тому +1

    Hallo aus Bayern..
    Ich möchte auch zu schicken..
    Thermo top c.
    Adresse bitte

  • @hegemoniahe
    @hegemoniahe 10 місяців тому +1

    Witam, a czy w e61 3.0d też jest to samo webasto? U mnie z dnia na dzień przestało działać. Nie włącza się z pilota oraz nie uruchamia po odpaleniu auta. Pozdrawiam.

    • @PioterWebasto
      @PioterWebasto  10 місяців тому +1

      Można powiedzieć że ten sam model pieca tylko inny sterownik, trzeba podłączyć komputer diagnostyczny i zdjagnozowac piec

    • @hegemoniahe
      @hegemoniahe 10 місяців тому +1

      @@PioterWebasto Dziękuję za odpowiedź. W takim razie nie pozostaje mi nic innego jak dzwonienie do mechanika w celu diagnostyki pieca lub do serwisu zajmującego się webasto.

  • @mastercarp7212
    @mastercarp7212 9 місяців тому +1

    Witam Panie Piotrze, jak mozna sie z Panem w celu naprawy zkontaktowac?

    • @PioterWebasto
      @PioterWebasto  9 місяців тому +1

      Witam, piotrek1503@poczta.onet.pl

  • @faficzekfaficzek8061
    @faficzekfaficzek8061 11 місяців тому +1

    Witam. Mam problem ze swoim webasto w e39. Mianowicie błąd glow plug flame detector short circuit to ground. Widzę że Pan bardzo sie zna na webasto więc może Pan podpowie co sprawdzić lub wymienić. Płytka nie była zalana już sprawdziłem. Pozdrawiam

    • @PioterWebasto
      @PioterWebasto  11 місяців тому +1

      Ten błąd ( świecy żarowej)to najczęściej uszkodzenie sterownika

    • @faficzekfaficzek8061
      @faficzekfaficzek8061 11 місяців тому +1

      @@PioterWebasto dziękuję za odpowiedź, pozdrawiam :D

  • @totimoon4696
    @totimoon4696 Рік тому +1

    Hallo, was hast du gegen einen glaub Widerstand ausgestauscht und warum?
    Und auf der Rückseite hast du 2 kleine Teile ausgelötet und hinterher wieder eingelötet. Die gleichen? Welche und warum?
    Zerlegen und Zusammenbau ist gut zu sehen, aber die Platine ist ja auch das Hauptproblem.

    • @PioterWebasto
      @PioterWebasto  Рік тому +1

      Hallo, diese beiden Elemente auf der Rückseite sind 20-kOhm- und 49-kOhm-Widerstände. Einer davon wurde beschädigt und der Controller hat den Gebläsefehler erkannt

  • @gamerhouse8057
    @gamerhouse8057 8 місяців тому +1

    okay now where do i get the repair kit for this auxilaury heater

    • @PioterWebasto
      @PioterWebasto  8 місяців тому +2

      parts are available in online stores

  • @wilu8
    @wilu8 9 місяців тому +1

    A jak radzisz sobie z urwanymi śrubami ?

    • @PioterWebasto
      @PioterWebasto  9 місяців тому

      Zobacz na kanale niedawno dodałem film jak je wykręcać

  • @tedokinta
    @tedokinta 9 місяців тому +1

    Hello, I have an auxiliary heater from BMW e39 2001. I can connect to it via the WTT software with K-DCAN(INPA) cable, but can only test the conponents, all of them seem to work, but the control buttons are greyed out. There are no falts in it. Tried with engineering version too. Primed it manually by turning the pump on couple of times and clearing the faluts and lock. The pump test and pump prime buttons are greyed out too.
    Can you tell me how can I start it on the bench, without the AC control unit from the car?

    • @PioterWebasto
      @PioterWebasto  9 місяців тому +1

      Hello, it needs to be reprogrammed, the original software has a lock that prevents it from operating without communication with the car

    • @tedokinta
      @tedokinta 9 місяців тому +1

      ​@@PioterWebasto Is this possible with my current setup? WWT Engineering and K+DCAN cable. If so can you point me in the right direction

    • @PioterWebasto
      @PioterWebasto  9 місяців тому

      @@tedokinta can you download the firmware using thermo test 2.16?

    • @tedokinta
      @tedokinta 9 місяців тому

      @@PioterWebasto I think yes, just need the correct parameters for the upload and download and correct firmware

    • @PioterWebasto
      @PioterWebasto  9 місяців тому +1

      @@tedokinta
      first, extract and save the original software, then upload the file from the link I will provide shortly

  • @lolish1234
    @lolish1234 Рік тому +1

    Where to get the parts for refurb?

  • @DaKing404
    @DaKing404 Рік тому

    Gutes video aber etwas nebenbei erklären wäre noch besser

  • @Glorry9
    @Glorry9 9 місяців тому +1

    Как быть с ети?

    • @PioterWebasto
      @PioterWebasto  9 місяців тому

      не понимаю вопрос