Except the MyWay colors, this Plutonium Flash is the most distinguish manufactured color combination I ever saw. (personal view, no need to disagree with me)
Good job. However, I did not see the internal cable assembly. Looks like you are not fond of foam inserts. I wasn't also before. But, I had to rebuild the cables because of that. You'll find out once you ride on semi bumpy roads. Happy riding and ride safe. Congratulations again.
You take off the plastic cover under the bottom bracket and there is a little plastic piece that gets screwed into the bottom of the battery. Then you twist the plastic piece on the battery onto the plastic bottom bracket cover. Then pull the battery cables into the frame and route them to the front and rear derailleur holes. Then slide the battery up through the bottom bracket into the seat tube and bolt the cover back onto the bottom bracket.
0:27 you put more torque than the necesary, because you should never caught the torque wrench in that way, please check this video ua-cam.com/video/BPe1-bDFVRM/v-deo.html
Acredito que no próximo filme do 007 ele irá pilotar essa máquina !!!! André Rj Brasil
Except the MyWay colors, this Plutonium Flash is the most distinguish manufactured color combination I ever saw. (personal view, no need to disagree with me)
Muy buen cuadro, me hubiera preferido verla con grupo Campagnolo pero según mercado Shimano es algo mejor en finura. Buen vídeo.
Good job. However, I did not see the internal cable assembly. Looks like you are not fond of foam inserts. I wasn't also before. But, I had to rebuild the cables because of that. You'll find out once you ride on semi bumpy roads. Happy riding and ride safe. Congratulations again.
Nice built and work!
Beautiful bike,...
Next should be the nightmare of replacing or servicing headset bearings😅
Nice work 👍
Thank you! Cheers!
Nice built. May I know where you mounted the battery. Did you use any bracket to mount it securely? Thanks.
it was mounted at the bottom of the frame. it has a specific bracket and its secured :)
You take off the plastic cover under the bottom bracket and there is a little plastic piece that gets screwed into the bottom of the battery. Then you twist the plastic piece on the battery onto the plastic bottom bracket cover. Then pull the battery cables into the frame and route them to the front and rear derailleur holes. Then slide the battery up through the bottom bracket into the seat tube and bolt the cover back onto the bottom bracket.
Hope you enjoy listening to the horrendous rattling as you didn’t bother insulating internal cables
Il tuo amico lodano amico mio
O O un po’ meglio così che si fa
dude if you are going to do a bike build finish it off with a bike weigh in. all the effort and no climax
👊
paano mag apply dyan sir mechaniko po sana mapansin nandito po ako ngayun sa dubai
20pezzi da montare e vedere se vanno bene
what is the weight :(
What size it is?
Vous donnez de l'eau à la bouche le prix qui m'intéresse
didnt show the finish build
OEM dogma ??
hi! its a legit pinarello dogma
LOL... this is chinarello. no serial ID number under the bottom bracket.
0:27 you put more torque than the necesary, because you should never caught the torque wrench in that way, please check this video ua-cam.com/video/BPe1-bDFVRM/v-deo.html