You can make them or buy online. ua-cam.com/video/2XOfpHI_n9A/v-deo.html ua-cam.com/video/3OZjZnfq9fU/v-deo.html You can make one easily by following below steps. In the first video I've made a tree with woolen thread. In the second video, I've made a tree canopy using sponge. Prepare wires as shown in the first video. For foliage, use a thick/strong yellow colour sponge. You will not get good results if you use a soft sponge. Tear the sponge into tiny pieces. Add green colour and mix it thoroughly and let it dry for 24 hours. When the sponge is completely dry add some "mud podge" on the sponge and mix it thoroughly. Mud podge will be white when wet and will become clear after drying. After drying the sponge with mud podge completely, you can use it on the wires to make the tree model as shown in the first video. You will need a strong clear glue spray. Important points: Sponge should be completely dry, else it will not stick to the wires. Sponge particles should be very very tiny for good results. Hope this helps.
There are 2 ways. 1) Connect all the red wires of the 4 led lights to the red wire of the 9v battery connector. Similarly connect all the black wires of the 4 led lights to the black wire of the 9v battery connector. 2) refer below video ua-cam.com/video/Ywsn-XhrXbo/v-deo.html
So beautiful 😊❤
So beautiful so elegant
Just like wow woe😊
Thank you so much 😊
This was a piece of art! Much love
Thanks a lot 😊😊😊
How to connect led with battery. How did you connect all the lights with the battery. Amd how did you you even turn on lights????? Please
ua-cam.com/video/xQ-P-LXG_rw/v-deo.html
ua-cam.com/video/Ywsn-XhrXbo/v-deo.html
Very nice thank you for this 👍🏻👍🏻
Fantastic
Thank you so much 😀
Nice project
Thanks
Super project bro 🎉🎉😮😮
Hello can u tell me what materials do i needed to make a pesticide robot
so good and helpful
Sangat membantu❤❤
Thx bro
Bro where is description link
Hi I want to know if the tree that you used are artificial or handmade please reply as I choosed this model for science exhibition
It’s artificial
The trees in the model are handmade the link is in description you can also use artificial trees it will be more easier
Who all doing for maths model 😂
Nice project123
Please tell me what size paper u used for making buildings
I have used approximate sizes. Make it as per your requirements.
Where have tou reffered the link for knowing how to connect led with a battery??
ua-cam.com/video/xQ-P-LXG_rw/v-deo.html
niceeeeeeeeeeeeeeeeeeeee
Thank you very much 😊😊😊😊
how do you stick on the buildings
Use fevicol glue
Can you tell what are the materials used
Hello how can you joined the wires in battery
ua-cam.com/video/xQ-P-LXG_rw/v-deo.html
Hi where can i find the paper strips
Use plain white paper and cut them into small stripes.
Hi can i use Fevicol instead of glue gun??
Yes, you can. But, fevicol will take long to dry. It will also make the paper soggy.
@@diyasfunplay ok thanks
That battery where can tell me address
Please 🥺
Check in your local electrical stores
Where did u get the trees
You can make them or buy online.
ua-cam.com/video/2XOfpHI_n9A/v-deo.html
ua-cam.com/video/3OZjZnfq9fU/v-deo.html
You can make one easily by following below steps.
In the first video I've made a tree with woolen thread. In the second video, I've made a tree canopy using sponge. Prepare wires as shown in the first video. For foliage, use a thick/strong yellow colour sponge. You will not get good results if you use a soft sponge. Tear the sponge into tiny pieces. Add green colour and mix it thoroughly and let it dry for 24 hours. When the sponge is completely dry add some "mud podge" on the sponge and mix it thoroughly. Mud podge will be white when wet and will become clear after drying. After drying the sponge with mud podge completely, you can use it on the wires to make the tree model as shown in the first video. You will need a strong clear glue spray.
Important points: Sponge should be completely dry, else it will not stick to the wires. Sponge particles should be very very tiny for good results. Hope this helps.
Aree yar bro we should connect each one street light one battery 😢😢
what are the materials needed?
What length and breadth was the thermocol size
please explain methods of making buildings🙏
Hello! What paper did you use?
Chart paper
@@diyasfunplay thank u po!
How did you attach led lights with battery?
ua-cam.com/video/xQ-P-LXG_rw/v-deo.html
What is the material
Hello dear how to get lights
Local electrical store or online
Holaaa cómo haces los cuadritos del edificio 😢
With marker
How the light glow
What material used
which material you used
Thermocol or cardboard for base, chart paper and cardboard (for buildings), led light, 9v battery.
Ek sath multiple Led kaise jode battrey ko aur battery konsi le
Can you tell how to explain it ? Please 🥺
How to connect all bulb
There are 2 ways.
1) Connect all the red wires of the 4 led lights to the red wire of the 9v battery connector. Similarly connect all the black wires of the 4 led lights to the black wire of the 9v battery connector.
2) refer below video
ua-cam.com/video/Ywsn-XhrXbo/v-deo.html
Sir please let me know about the wiring process 😵💫
Not for maths for science avishkaar
PaHiccupa
Thanks for the visit 😊
Me
Cringe bgm
Fantastic
Where did you get the brown colour building?
How to connect led with battery
ua-cam.com/video/xQ-P-LXG_rw/v-deo.html