I believe the reason why the finish deck takes more power than the tough cut deck, is because the finish deck has lift to the blades, whereas the tough cut doesn’t. Also, the finish deck (at least the side discharge ) has to move all the clippings to the one side of the deck instead of dropping it where it’s cut.
I’ve never though about the high lift blades! Yes working it all the way over to the discharge side could definitely be a factor. I wonder if the tip speed is more on the finish mower also? I’m gonna have to read into this now lol
Easy to tell that the operator is accustomed to other tractors and mowers. Going up and down the slope instead of across. Nothing wrong with doing that at all mind you, just with a ventrac it's not as much of a concern at least when fitted with the double wheel kit. But it's good practice anyway, no sense in giving a false impression to anyone that wouldn't think harder than what they saw someone else do. Although, like many videos prove well. Slopes can be deceptively steep. Heck had a similar experience at my work, a back corner looks like a gentle rise. In reality it's steep enough you nearly have to be touching the ground with your hands to climb it without sliding.
Although the client may not have requested it, is the grass long enough to bale later, after it dries? I know that’s done on farms but probably not near rural roads.
I got a mount hanging from the roof to for a go pro. This was a last minute idea 😎! There will definitely be more to come. I can do some of him just doing finishing mowing also. My dad is the man person who runs the ventrac. Keeps him off his knees
I enjoy mowing and the Ventrac 😊
Love the Ventrac. Job well done.
Thank you 🙏
Very nice work!👍🏻👍🏻
Good job hellow from COSTA RICA 🇨🇷,
That really is a fantastic mower. Looks like you're all set to clean up.😅
Looks great
Thank you 😊
Nothing like a Ventrac, I love my Ventrac 4500Z!!
That is what I had prior to the 4520P. I love kawis so I wanted to switch it up some. This is much easier on fuel I will say that!!
That's a pretty nice mower :)
Thank you!!😎
Very Good JOB you two
Thank you!!!
I believe the reason why the finish deck takes more power than the tough cut deck, is because the finish deck has lift to the blades, whereas the tough cut doesn’t. Also, the finish deck (at least the side discharge ) has to move all the clippings to the one side of the deck instead of dropping it where it’s cut.
I’ve never though about the high lift blades! Yes working it all the way over to the discharge side could definitely be a factor. I wonder if the tip speed is more on the finish mower also? I’m gonna have to read into this now lol
Use a drone and fly slowly over brush before mowing it helps more than you might think.
👍👍👍👍❤️❤️❤️
wow I'm from woodsfield ohio but live in washington state now . i recognized the accent
Do I really have one ??? Hahaha. Woodsfield is close to us for sure we are outta Marietta ohio.
Easy to tell that the operator is accustomed to other tractors and mowers. Going up and down the slope instead of across. Nothing wrong with doing that at all mind you, just with a ventrac it's not as much of a concern at least when fitted with the double wheel kit. But it's good practice anyway, no sense in giving a false impression to anyone that wouldn't think harder than what they saw someone else do.
Although, like many videos prove well. Slopes can be deceptively steep. Heck had a similar experience at my work, a back corner looks like a gentle rise. In reality it's steep enough you nearly have to be touching the ground with your hands to climb it without sliding.
if you want it to climb steeper hills a decent set of tire chains would help
Although the client may not have requested it, is the grass long enough to bale later, after it dries? I know that’s done on farms but probably not near rural roads.
Mount the camera on the mower deck and on the post next to the operator for better views. Looks nice.
I got a mount hanging from the roof to for a go pro. This was a last minute idea 😎! There will definitely be more to come. I can do some of him just doing finishing mowing also. My dad is the man person who runs the ventrac. Keeps him off his knees
Ventrac is like a swiss army knife
I call it’s the finer Steiner !!🤣
what a mower
What deck are you using?
72in Tuff cut here
Is that Melvin 😅
You know it!!
two ways to find it, look first
como que eu consigo comprar uma maquina desta qual o contato do representante aqui no Brasil esta 450P e ideal pra mim OSVALDO DO DF
อยากรู้ราคาในไทยมีขายไหมน่าสนใจมากๆ
Camera handling to be improved, often too far away from Action.
Big deal... not
Your accent sounds Amish.
😂😂