Just change the engine oil every 3k miles. And drain the transmission every 3k miles till the fluid comes out red ish again. It will run for a long time
Same here i have chevy traverse 2012 showing code p2138 i replaced trotle body, accelerator padel but still same can u please help me out Its running but engine power is reduced , stabilitrax &traction control lights comes on and even some time it dont even accelerate
I have a 2011 Equinox 2.4 in my shop with the exact same issue going on. Im in Conroe (just a bit north of Houston). Can you give me the info of the guy who cloned your PCM?
Check the map sensor conector. It happened to me with a Buick enclave. One of the wires was broken and it wasn’t visible. It was broken in the inside not the insulation
Thank you. Just took a chance on a 2012 with 100k miles. Hopefully I can maintain it and avoid the dreaded 3.6 problems.
Just change the engine oil every 3k miles. And drain the transmission every 3k miles till the fluid comes out red ish again. It will run for a long time
You can follow me for more information about how to maintain these vehicles
Same here i have chevy traverse 2012 showing code p2138 i replaced trotle body, accelerator padel but still same can u please help me out
Its running but engine power is reduced , stabilitrax &traction control lights comes on and even some time it dont even accelerate
Let me check tomorrow. I was very busy today. Mine had the P0697 which is different code than yours. I’ll look it up tomorrow for you
Ok bro
try checking for loose fuse box bolts next time add washers to space it and tighen back down
the tcm was faulty. I replaced it and the car runs and drives like new again. thank you for watching, like and subscribe it helps
I have a 2011 Equinox 2.4 in my shop with the exact same issue going on. Im in Conroe (just a bit north of Houston).
Can you give me the info of the guy who cloned your PCM?
Yes, I got the information at the shop let me look for it tomorrow
hi loved your video i cloned a new pcm from autozone and car ran fine for 3 weeks, came back today same issues. i hope it didnt burn another pcm!?!?
I hope is under warranty, if you did burn it again you need to find the root of the problem before installing another one
I have the same codes with Buick enclave 2014 Same codes just with map sensor circuit low voltage any advice
Check the map sensor conector. It happened to me with a Buick enclave. One of the wires was broken and it wasn’t visible. It was broken in the inside not the insulation
Are you getting the p0697 too
hello. I have the same problem, but with codes p0157 and p0158. of the oxygen sensor. Could you share the contact of the person who fixed your PCM?
he is in Houston are you close by?
@@antonioaguirre6166 no i live in Louisiana
You will have to bring both pcms so he can clone them
Let me see if I can get the info I miss placed his business card
Ok. Thank you
Where are you located
@@frankmaldonado6415 Galveston Tx. Sorry for the delay response. I’ve been so busy lately