Petromax HK500 Lantern | Features, Maintenance, and Lighting

Поділитися
Вставка
  • Опубліковано 13 жов 2024
  • Today we're going over the Petromax HK 500 lantern. We go over the features, talk about maintenance, and demonstrate the lighting procedure of this beautiful lantern.
    We hope this video helps!
    Check it out on our website: classicoutdoor...
    #petromax #HK500 #PetromaxHK500

КОМЕНТАРІ • 35

  • @amarkishor7531
    @amarkishor7531 5 місяців тому +2

    Great remembering old era

  • @marcodallitalia5927
    @marcodallitalia5927 4 місяці тому +1

    This video was helpful??? It was just FANTASTIC, mate !! Instead of "studying " a few pages instruction booklet, you've explained everything in 3 easy steps EVRYTHIG!! Thank you ( magic man)

  • @acersalman8258
    @acersalman8258 Місяць тому +1

    Good lanterns

  • @gridhunter3551
    @gridhunter3551 Рік тому +4

    Good explanation and demonstration. Thanks.

  • @silent_influence.0114
    @silent_influence.0114 Рік тому +2

    Great petromax light ❤👍

  • @mikeadler434
    @mikeadler434 14 днів тому

    👍👍

  • @lukasbottger1235
    @lukasbottger1235 Рік тому +7

    Always light the Gas mantle before lighting the lamp

  • @nonapplicable2086
    @nonapplicable2086 8 місяців тому +1

    I grew up to these in early 90’s Iraq.

  • @kolsen6330
    @kolsen6330 9 місяців тому +5

    Using the rapid preheater as shown, which was intended for army use in extreme cold, is hard on the mantle. The better method is to fill the pan with alcohol, I use Everclear or 99% rubbing alcohol, Let it burn, repeat and then open the valve.

    • @theclassicoutdoors
      @theclassicoutdoors  8 місяців тому

      Good tip!

    • @gilbertopadilla3611
      @gilbertopadilla3611 5 місяців тому

      If I had one I would just carry spare generators. His pre heat method is too convenient not to use.

    • @patrickeng4472
      @patrickeng4472 Місяць тому

      Hey can someone help me?
      I can't get any air into the lantern when I try to pressure it up
      It just won't pump air in😞
      Any thoughts on this?

    • @kolsen6330
      @kolsen6330 Місяць тому

      @@patrickeng4472 Are all the fittings...fuel fill, rapid preheater and pump top screwed down tightly? Is the air vent on the gauge closed? If still not taking air, I would suggest putting the BASE in a pan of water and then pumping it up while looking for bubbles showing a leak. Next would be to unscrew the pump and look to see if the pump shaft seal is damaged.

  • @Moondoggy1941
    @Moondoggy1941 7 місяців тому +3

    How long does the tank last?

    • @somesvede
      @somesvede 7 місяців тому +2

      About 8 hours.

  • @nnoddy8161
    @nnoddy8161 Рік тому +1

    Can the Petromax run on Shellite or Coleman fuel?

    • @theclassicoutdoors
      @theclassicoutdoors  Рік тому +2

      Colman fuel yes - I’m not familiar with shell light so can’t say for sure. If it has similar properties I would think so

    • @nnoddy8161
      @nnoddy8161 Рік тому +2

      @@theclassicoutdoors Thanks. Shellite is what naphtha is called in Australia - en.wikipedia.org/wiki/Petroleum_naphtha.

    • @The762x39mm
      @The762x39mm 7 місяців тому

      @@theclassicoutdoors Petromax use kerosene/paraffine only, not coleman fuel or gasoline.

    • @kolsen6330
      @kolsen6330 5 місяців тому

      NO It is for KEROSENE only. I think coleman fuel would be too hot for it seeing as how it was designed for kerosene.

    • @worldtraveler930
      @worldtraveler930 13 днів тому +1

      Kerosene is your Hottest of burning fuels that's why space heaters and jets use it!!! 🤠👍

  • @rollingstone1689
    @rollingstone1689 10 місяців тому

    Help. I got a hk500 and it worked good the first time I used it . The next time i turned it on the mantel juat got full with black sut. So i changed the mantels and the second time after i preheated it the turned the regulator it just filled with sut again

    • @theclassicoutdoors
      @theclassicoutdoors  8 місяців тому +1

      Haven't experienced that before... I would try draining the fuel. Check the path the fuel travels, and see if it all looks good. Good luck!

    • @rollingstone1689
      @rollingstone1689 8 місяців тому

      @@theclassicoutdoors yes sorted it. It was the gap between the generator and that u shaped pipe. I put some of that exhaust repair puttey to hold it in place it works great now thanks.

  • @gerrycastlemanwarde5933
    @gerrycastlemanwarde5933 10 місяців тому

    Can the lantern be used indoors?

    • @theclassicoutdoors
      @theclassicoutdoors  10 місяців тому +2

      Yes, it can. It does produce a fair bit of heat and a smell accompanies the light. I do recommend lighting it outdoors - that has the most smoke and fumes, but once the mantle is glowing there is much less smell.

    • @gerrycastlemanwarde5933
      @gerrycastlemanwarde5933 10 місяців тому

      Many thanks from Ireland!@@theclassicoutdoors

  • @gerrycastlemanwarde5933
    @gerrycastlemanwarde5933 10 місяців тому +2

    The first time I fired up my new Petromax I had problems! They are fiddley and if you don't like messing with old Morris Minors and Swiss watches at the same time then the Petromax is not for you! I suggest the non DIY people buy a gas or Electric Lantern.
    There are advantages to owning a petromax but you will need patients it not as simple as filling it with paraffin and away she goes!

  • @shilpydebnath52
    @shilpydebnath52 5 днів тому

    দাম বলেন আমি নেব

  • @Sabrina-u9m
    @Sabrina-u9m Рік тому +1

    Great video

  • @artenonerbas8544
    @artenonerbas8544 10 місяців тому +1

    How much and where to buy?

    • @theclassicoutdoors
      @theclassicoutdoors  9 місяців тому

      Hello,
      Here is a link to the lanterns on our website:
      classicoutdoors.ca/products/petromax-paraffin-lamp?_pos=1&_sid=04175ecbb&_ss=r
      Here is another link to the lantern shades:
      classicoutdoors.ca/products/petromax-paraffin-lamp-shade?_pos=2&_sid=04175ecbb&_ss=r
      Thank you!

    • @kolsen6330
      @kolsen6330 9 місяців тому

      Petromax webpage. All the manuals are there too.