I just purchased an Endeavor2 S for this exact reason! What a deal for such a great DIY platform! I already have a MakerX VESC and Trampa Wand on the way :)
I don't think the s has a vesc. You should be fine using the same vesc four but id need to take a look to be sure. It won't impact your range, could improve it
@@M0LHA Thanks. I Am Going To Buy A Flip Sky Dual 4.20 Do You Think I Need To Buy The Power Button And Remove The Stock One The Endevor Came With? I've Never Put A ESC In Before.
@@daveybob7272 Fitting a VESC is easy, honestly there's not much to it. You'll have six bullet plugs coming from the motors, three for each motor. Separate the wires from the two motors so they don't accidentally get mixed (bad time), plug each wire into the new vesc - it doesn't matter what order, just make sure you don't mix them up. Once you've done that, either use heat shrink or some electrical tape to make sure no metal surfaces can short against each other. The VESC app itself is a bit complex but at the same time fairly straight forward. If you bug me enough I may do a video explaining how to set that up - it's on my list of things to do but I haven't got around to it yet. As for the power button, nah I don't think so. It's the same as the Pro. That said, for a few bucks more you may as well keep a spare. Let me know how you get on buddy
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
I just purchased an Endeavor2 S for this exact reason! What a deal for such a great DIY platform! I already have a MakerX VESC and Trampa Wand on the way :)
Weird how they sell it with a customizable vesc based esc but messing with it voids the warranty. Either way I can’t wait for mine to arrive!
The platform looks really well build inside! It would be nice to customize buying batteries/VESC/coil shocks/decks.
still waiting for your vesc config video on the propel :)
If you really wanted bindings, do you think you could get an Endevour S deck and screw it right into the wood?
That'd work but I'd still be concerned about the lateral loading and fatigue. I think foot stops are probably the way forward on this board
Propel has released bindings with mounting plates!
On My Propel Endeavor S What Esc Is Compatible With The 3P Battery? Don't Want To Mess Up My Range.
I don't think the s has a vesc. You should be fine using the same vesc four but id need to take a look to be sure. It won't impact your range, could improve it
@@M0LHA Thanks. I Am Going To Buy A Flip Sky Dual 4.20 Do You Think I Need To Buy The Power Button And Remove The Stock One The Endevor Came With? I've Never Put A ESC In Before.
@@daveybob7272 Fitting a VESC is easy, honestly there's not much to it. You'll have six bullet plugs coming from the motors, three for each motor. Separate the wires from the two motors so they don't accidentally get mixed (bad time), plug each wire into the new vesc - it doesn't matter what order, just make sure you don't mix them up. Once you've done that, either use heat shrink or some electrical tape to make sure no metal surfaces can short against each other.
The VESC app itself is a bit complex but at the same time fairly straight forward. If you bug me enough I may do a video explaining how to set that up - it's on my list of things to do but I haven't got around to it yet.
As for the power button, nah I don't think so. It's the same as the Pro. That said, for a few bucks more you may as well keep a spare.
Let me know how you get on buddy
What kind of spongy griptape do you have and where can I buy some?
Dope grip. In the UK you can get it from estate.shop. In other regions it should be easily available as it’s quite common
@@M0LHA thank you