New wheels are typically more fluid, so when more motion is involved, it takes getting used to before you can nail tricks again. I recently changed my wheels and bushings, now my board feels way better, but also different. Basically, I'm back to the drawing board, but thats fun!
Buddy.... I'm in love with your content ideas. You're pure genius. I was literally getting a new setup the other day and having the exact mentality of your intro! 😂 And being in Canada just makes the shipping and conversion EXTRA painful. Bless Teak for the ATP wheel sale or I would be riding $10 plastic no grip cnc wheels w sub par bearings. (Also thank you cuz you're the one who put me on to Teak basically being one of the best Bang for Buck stores)
These do work I did not use sand paper . There like the globe wheels just hade to hit the bearing in with a rubber malit and there all good still use them today.
@03:04 Why don't you put the four beads on the stick at once ? How can you be sure the four wheels will have the same diameter if you do it one by one ?
Awesome idea dude!! Even tho no one is gonna put in the work make these, it’s awesome knowing you can do it. Wheel companies needa start lowering prices after this😭💀
I tried to build my own fingerboard setup after seeing how much the tech deck pro series cost and was surprised with how cheap the trucks board and grip was. And then I went to the wheels section And was dumbstruck with expensive they all were It is cheaper to buy actual bearings and wheels at a skate shop than it is for a finger board How the hell does that happen
What I hate is buying "CNC" wheels in bulk and getting the ones with the outer rings on them. They're literally like you gotta do this and I jus kept the bearings because 2 k-flips and they crack! 😂 😂 How do you know which ones are not like the mechanical pencil outter ring ones
nah fakie is when you're rolling to the left with your right hand, switch is when you're using index finger on the back and middle finger on the front, left hand is just a leftie
I love your content! hanks for being so inspirational I'll be sure to make some wheels. In fact, with your permission of course, I want to make you a special deck just as a gift! Hit me up if you want, just email :) 🤗👍
I love the vids but your discord channel isn’t very friendly. They called me poor insulted me and said that i couldn’t afford normal trucks one guy was called mooshy or something. Can you fix that?
these wheel companys are very small and put alot of effort in and your just making them look bad with your plastic beads acting as if thats what they all do. Horrible video was not informative should have just gone on about affordable wheels for super cheap not making companys look bad for what?
If you posted this yesterday I would have saved $6
😂
😢
@@NrlEditssswhat U so sad for
😢
😢
Killing it with the intro’s 😊
Im WARNING YOU ignore the prize its a scam
I got banned from the discord by showing a hot dog chopped in half with ketchup mixed with bbq sauce
no brawlstars no rizz 2:33
His search history showed that he googled: "How to make friends" 0:33
oof
New wheels are typically more fluid, so when more motion is involved, it takes getting used to before you can nail tricks again. I recently changed my wheels and bushings, now my board feels way better, but also different. Basically, I'm back to the drawing board, but thats fun!
Im WARNING YOU ignore the prize its a scam
Buddy.... I'm in love with your content ideas. You're pure genius. I was literally getting a new setup the other day and having the exact mentality of your intro! 😂
And being in Canada just makes the shipping and conversion EXTRA painful. Bless Teak for the ATP wheel sale or I would be riding $10 plastic no grip cnc wheels w sub par bearings.
(Also thank you cuz you're the one who put me on to Teak basically being one of the best Bang for Buck stores)
Im WARNING YOU ignore the prize its a scam
These do work I did not use sand paper . There like the globe wheels just hade to hit the bearing in with a rubber malit and there all good still use them today.
The cinematic shot of the drillbits is my favorite part
Im WARNING YOU ignore the prize its a scam
@@ViralFrostYT I think you’re just trying to claim the prize yourself 😂
@@mikeyg69 nope im not dumb
Really nice content! Keep it up ❤️
Im WARNING YOU ignore the prize its a scam
@@ViralFrostYT I know ,but thx
can u tel me where to buy cheap bearings?
it feels like this video editing is different than the others😉😉
Im WARNING YOU ignore the prize its a scam
@@ViralFrostYT Judging by the username and the text,i can already tell its a bot🤖🤖🤖🤖
@@KillowPillow yea ik but its just that there are little kids that fall for it
@@ViralFrostYT ikr
@@KillowPillow yup
Nice intro!
Liked and subscribed! thanks for your help!
Urethane wheels are something else man...... Spitfire formula 4s (Real skateboard Urethane wheels) are cheaper .....
Ya honestly 😂 idk how they justify the price of "real urathane" when skateboard wheels are even more material
@03:04 Why don't you put the four beads on the stick at once ? How can you be sure the four wheels will have the same diameter if you do it one by one ?
I thought about doing that but some of the beads are naturally uneven so I had to sand each of them specifically for each shape
@@TheGripsion OK I understand :)
Your content is awesome and you inspire me you are my idol!
God bless you! ⛪️
Im WARNING YOU ignore the prize its a scam
@@ViralFrostYT i know.
That was the best intro😂
Im WARNING YOU ignore the prize its a scam
This is like the origin story of DIY
Im WARNING YOU ignore the prize its a scam
When your finger board website will be in stock 😭
Id watch a whole video of the lathe in use man. Fun video, keep it up.
Im WARNING YOU ignore the prize its a scam
@@ViralFrostYT bro what a snitch
@@mongrelguts bruh
Good job bro love the vids
Awesome idea dude!! Even tho no one is gonna put in the work make these, it’s awesome knowing you can do it.
Wheel companies needa start lowering prices after this😭💀
Do trucks for cheap
what music do you use?
I love your vids thanks for making them
❤love your videos
One question are you out of stock of dark wallnut from your shop
Pls make another rating my subscribers fingerboards
Could you make a video, where you make a ramp out of metal or something ?Maybe a bench?
That’s sick 0:08
bro just change your fb bearings in teak page are 3 dls
Do a bike video,or a bike check video of ur dirt jumper
Love your vid’s I’ve been watching since the beginning and I subscribed on 20 different UA-cam accounts
Can you probably doing a video where you show your bloopers
You should make a video where you make the best possible fingerboard out of only teak tuning parts
After he said if costs less than a piece of griptape he just threw his fingerboard and the tool it was just funny bro😂😂😂
What are the measurements of these beads?
Awesome bro!
hey could you review obsiusfb I hear they have good trucks and decent wheels!
@TheGripsion. hallo‼
nah bro played the algorithm with that background music 💀
Nice🎉
Can you do a left hand skate video please 🙏
Wide old school fingerboard pls
Omgeeee he posted
Why was the left handed kickflip and tre so special, I use my left hand to fingerboard is that wierd?
Cuz that’s switch for him
I saw one of these on the ground the other day and was thinking the same thing
Fingerboarding 4 ever!!!
Make a fingerboard wheel out of a skateboard wheel
I tried to build my own fingerboard setup after seeing how much the tech deck pro series cost and was surprised with how cheap the trucks board and grip was. And then I went to the wheels section
And was dumbstruck with expensive they all were
It is cheaper to buy actual bearings and wheels at a skate shop than it is for a finger board
How the hell does that happen
Are u dum mate no matter the precision look at the size they shouldn’t be 30 bucks they should be 10 bucks
im right handed but ive always fingerboarded with my left hand. using my rigth hand feels so weird and i can barely get any pop or control
I get it. I swing right for golf, left for hockey, right or left for baseball…
at the start he got 29 mm deck and 34 mm trucks god damn it
What brand do you think has the best fingerboards?
Make a fingerboard out of leaves!!
You said "Davidjones": is he still making videos, because I don't see new videos on his channel?
Cool video👍
Now this is in my budget 😂
Im WARNING YOU ignore the prize its a scam
@@ViralFrostYT duuuuh
@@ctj6562 im just trying to help you but sorry if i bothered you
@@ViralFrostYT ur good, keep it up in case the person is a little clueless
Can I have a 34 millimeter deck with white wheels with bearings in them pleas I subscribed to your channel and foam griptap
Hi I love you vids
If I subscribe will you make me a old school fingerboard
Buy a Tech that cruiser board
Where did you get the carbon fiber for the worlds strongest fingerboard?
Yeah boiiii.
6 days please make another video.
dammmmn broo!! you besst!!!!!!! s22 from brasil!!!
Day 53 for asking for wide old school fingerboard
that intro though
Love it
hy gripson i love your vids but there is one thing i wanna buy a fingerbaord from ur webstite
but ther are all out of stock anyway have a nice day XD
What I hate is buying "CNC" wheels in bulk and getting the ones with the outer rings on them. They're literally like you gotta do this and I jus kept the bearings because 2 k-flips and they crack! 😂 😂 How do you know which ones are not like the mechanical pencil outter ring ones
Im WARNING YOU ignore the prize its a scam
Would left handed tricks on a skateboard be considered fakie?
nah fakie is when you're rolling to the left with your right hand, switch is when you're using index finger on the back and middle finger on the front, left hand is just a leftie
Get blistered wheels!!!
I saw it’s fail the kickflip test lol
Thanks, i just made beads
I put that idea in your discord and you didn’t even give me credit
damn 25 cents
Lol
how to make friends LOL
Brush clean wheels for under 6$
use my logo
I just got scammed by someone that said im winning a prize and it was a fake profile
I love your content! hanks for being so inspirational I'll be sure to make some wheels. In fact, with your permission of course, I want to make you a special deck just as a gift! Hit me up if you want, just email :) 🤗👍
Noice
Ty soooo much
Love ur content
Hello
Yertt
37 seconds
First❤🎉🎉
Pin me
I love the vids but your discord channel isn’t very friendly. They called me poor insulted me and said that i couldn’t afford normal trucks one guy was called mooshy or something. Can you fix that?
First
don’t pin this
i dont want pin
heyy you got what you wanted
Thank you for not
these wheel companys are very small and put alot of effort in and your just making them look bad with your plastic beads acting as if thats what they all do. Horrible video was not informative should have just gone on about affordable wheels for super cheap not making companys look bad for what?
Why is this comment pinned
Wide old school fingerboard pls
Pin me
Why would he?
First
Wide old school fingerboard pls
First
First
Ur definitely not💀
@@xistotuna ok lol