Disassemble a Shimano Citica 200HG in 7 mins by PapaChopsATX
Вставка
- Опубліковано 29 січ 2025
- Complete disassembly of a Shimano Citica 200HG by Papa Chops' Rod And Reel Repair. Headquartered in Austin, Texas. Visit us at www.papachopsat... or call us at 512.294.3155. A Full Boca Bearing Upgrade is confirmed and available.
I took a shimano slx dc apart as my first reel ever to take apart and I got it all back together fine it was rough and the dc didn’t work again after that lol, I took it apart because I got sand in it and I had to clean it out
Does the anti reverse bearing when inserted goes flush from the outsise end plate or inside of the end plate
Thais reel has a micromodule? The curado 200hg is to much better than this?? Or the difference is small?
Yes on th MM Gears. Difference is minimal.
Do a boca bearing upgrade for the citica hg
So I just got one of these. Popped of the side with the break system and an extremely small spring and small axle type piece w/ part number bnt 4631 fell out. I didn’t notice it in your video. Any idea where it goes back in? The diagram states it’s near the open switch but not sure.
Thanks in advance
for ppl watching , the bearing on the bottom of that main shaft always
needs lubed and so does the super free bearing (for the pinion).
No reassembling it???
Hey everyone looking for parts for this reel, can someone point me in a good direction for them?
hey i took my citica apart an cleaned it but it still has the problem that almost every cast even tho my thumb bar isnt engaged line still falls. anyone know hats the problem?
I'm 17 and completely stripped a citica 200e down to the frame for extensive cleaning by severe neglect and abuse by the previous owner and rebuilt it. If I can do it, you can do it!
Fajny film. Dzięki
Where's part 2
needing to change out the anti-reverse bearing. No help here
Barry Wuthrich at the 3 min 16 sec mark the video shows the Sideplate being removed. At that point pull the A/R, and swap it for a new one.
@@BeauReed Got it. Thanks.
@@BeauReed The anti reverse bearing has a beveled side and an almost flush side. Which side goes towards the inside? Citica 200g series.
@@barrywuthrich8530 right handed reels are beveled out. Left hand reels are beveled in.
Like friend
I have Diawa Steez SV, non TW version. Cost $399. Can you clean, tune and put boca bearings. I can ship. I live in Fort Worth. How much, thanks. Check my page for reel I am talking about, I have a video on it. Thanks.
Dude your work bench is dirty and nasty. Do you want all that grime and grit in the reel
NateRB this was a “how to disassemble” video only. Not looking for advice, but thanks though.