Hello BALTOMAN, you've asked this question at the perfect time. (no surprise given the way the universe operates) Yesterday I received an email from a gentleman who purchased my connectors and is conducting experiments with quartz sand. He set up a russian style pyramid inside a giza and filled both with quartz sand. He discovered that the energy from the giza pyramid goes out about 10 metres and the combination pyramids goes out about 30 metres. So the Russian style gives more radiating power. He also commented that the sand is the best enhancement (about 20%) and an orgone sphere together with the combination pyramid gives another 10%.He is conducting some further research on this and I look forward to hearing more. Thanks for the perfectly timed question. Regards Mark:)
Are you saying he constricted a Giza- type pyramid and then hoisted a smaller model Russian style pyramid at the apex of the Giza pyramid filled with quartz sand? Like a small pyramid within a large pyramid?
I understand that the original pyramids were coated with crystalline ( sand ) and that had an affect on the performance of the pyramid. I was thinking if constructing my pyramid of 3/4” pvc , then filling the tubes with crushed quartz crystal . I was wondering what your thoughts or anyone’s thoughts may be regarding this . Thanks for your time .
Some say that non-conductive material works better. I'd like to see more comparisons (saw one that seemed to confirm this, they sprouted corn and the metal did okay but the wood did best. For those with metal already, well at least they seem to work better than no pyramid!)...
Yes you are right. PVC or wood are the best from what I researched. The metal ones don't have the same power, because it is acting as a faraday cage ,disrupting the pyramid field. When using wood, use glue or wooden dowels, no metal fasteners. Hope this helps.
Hello, and thank you for all of this information! I’m just wondering, if my space can only accommodate a 5’ squared pyramid and I have my heart set on copper, will there be a sag if I use 1/2” diameter copper tubing/pipe? Also, would you be willing to tell me where I can find the pieces you used to connect the pipes in the bottom corners, as well as the cap on top? I am in the states. Be well and thank you again.
Lol does anyone remember Shirley from 'A Country Practice' and her meditation pyramid? I saw it as a child and was fascinated and onky now 35 years later am I oing to make one!
We all loved Shirley and people mention her and her pyramid quite often. Great to hear you're going to have a crack at making one yourself. Once you get the sizes right, its easy. You'll feel a great sense of satisfaction and pride when its finished. Happy to give you any advice 😃
Can the copper ones help to stop microwave energy affecting us ....I'm going to make copper wire and wood to help my vegetables electroculture think it's called .....❤️
I will try to do a wooden pyramid in my garden for meditation, just wondering if the baselines are really necessary or if it is sufficient enough w the pyramid form of poles stuck in the ground w. equity regarding the measures for a Gize pyramid?
Try around 7'7". That's only a rough guide as the measurements I provide take into account the diameter of the pipe being used and make allowances for my connectors. Since I don't know what pipe diameter you are using or how you are attaching the pipe to each other you will find that it wont create the sacred geometry but it will look similar. Hope this info helps Regards Mark
From the Ra Material: "66.24 Questioner: There’s no best material? Ra: I am Ra. There are better materials which are, in your system of barter, quite dear. They are not that much better than substances which we have mentioned before. [plastic, wood] *The only incorrect substances would be the baser metals.* [see Dan Winter for the deleterious effect of base metal (eg copper, tin) on magnetism and water] The Law of One Ra Material is available free online
Greetings, thank you for this video 🙏 I've wanted a pyramid to sit under when I meditate for many years, I'll have one soon as my father is going to make me one. I want to take mine apart so I can travel with it & being an ex plumber dad will know what kind of joints to use. Copper is my fave choice but I don't want it to tarnish, do you know if some kind of sealant like clear paint or something is ok to paint on it? I know I can scrub it to rid the tarnish but I'd prefer to not have to do that. Copper is expensive too so I've also considered using curtain dowel & paint a coat of copper paint on it- I'm sure copper paint exists. I know it's the shape/dimensions that make pyramids powerful so the materials used wouldn't make a difference to it's power but I don't want an aluminium one because of it's negative affects on our health. I'm not saying an aluminium pyramid would affect me it's more the idea of it for me- I'm a pedantic Virgo, haha!!
Hi , happy to share measurements however they won't be of any use without purchasing the connectors from www.urbanshaman com.au. The measurements I use for the pipe or tube incorporate an allowance for the connectors. This means without the connectors the pipe or tube would be marginally too short and would not create the correct angle to form the pyramid into the sacred geometry I speak of in my videos. Thanks for the enquiry:)
Hello BALTOMAN, you've asked this question at the perfect time. (no surprise given the way the universe operates) Yesterday I received an email from a gentleman who purchased my connectors and is conducting experiments with quartz sand. He set up a russian style pyramid inside a giza and filled both with quartz sand. He discovered that the energy from the giza pyramid goes out about 10 metres and the combination pyramids goes out about 30 metres. So the Russian style gives more radiating power. He also commented that the sand is the best enhancement (about 20%) and an orgone sphere together with the combination pyramid gives another 10%.He is conducting some further research on this and I look forward to hearing more. Thanks for the perfectly timed question. Regards Mark:)
Are you saying he constricted a Giza- type pyramid and then hoisted a smaller model Russian style pyramid at the apex of the Giza pyramid filled with quartz sand?
Like a small pyramid within a large pyramid?
I understand that the original pyramids were coated with crystalline ( sand ) and that had an affect on the performance of the pyramid. I was thinking if constructing my pyramid of 3/4” pvc , then filling the tubes with crushed quartz crystal . I was wondering what your thoughts or anyone’s thoughts may be regarding this . Thanks for your time .
BALTOMAN oooo I like that idea!
Brilliant
Can i do this with copper pipes?
BRILLIANT
What about building in timber and coiling copper wire around?
Thanks for the question. I believe you can use a mixture of material. The most important factor is making sure the geometry is accurate.
Not a problem. It's a great idea. The more we all experiment the better:)
That's a great idea! Would work well on Jacuzzi perhaps.
Some say that non-conductive material works better. I'd like to see more comparisons (saw one that seemed to confirm this, they sprouted corn and the metal did okay but the wood did best. For those with metal already, well at least they seem to work better than no pyramid!)...
Yes you are right. PVC or wood are the best from what I researched.
The metal ones don't have the same power, because it is acting as a faraday cage ,disrupting the pyramid field. When using wood, use glue or wooden dowels, no metal fasteners.
Hope this helps.
@@Mike588 thank you and it is better then copper .thanks
Hello, and thank you for all of this information! I’m just wondering, if my space can only accommodate a 5’ squared pyramid and I have my heart set on copper, will there be a sag if I use 1/2” diameter copper tubing/pipe? Also, would you be willing to tell me where I can find the pieces you used to connect the pipes in the bottom corners, as well as the cap on top? I am in the states. Be well and thank you again.
I understand a 70 degree slope is best for powerful results per Russia studies.
Which studies?
Hello Rohan, in matters like this we always advise people to consult with their medical practitioner and seek their opinion.
Can metal and wood be used together? Meaning wood dowels and metal joints to hold together? Thank you.
Excellent video! Huge thumbs up and thank you so much for this! Subscribed!
Lol does anyone remember Shirley from 'A Country Practice' and her meditation pyramid? I saw it as a child and was fascinated and onky now 35 years later am I oing to make one!
We all loved Shirley and people mention her and her pyramid quite often. Great to hear you're going to have a crack at making one yourself. Once you get the sizes right, its easy. You'll feel a great sense of satisfaction and pride when its finished. Happy to give you any advice 😃
Thanks for the comment Jesse.
Can the copper ones help to stop microwave energy affecting us ....I'm going to make copper wire and wood to help my vegetables electroculture think it's called .....❤️
Has anyone tried a wooden built pyramid? I was told it's highly effective as well. Hoping to make it more portable friendly as well!
Hi Chris, I have and it worked well with 19mm dowel. Turns out the connectors I make for 19mm copper work perfectly with wooden dowel
I will try to do a wooden pyramid in my garden for meditation, just wondering if the baselines are really necessary or if it is sufficient enough w the pyramid form of poles stuck in the ground w. equity regarding the measures for a Gize pyramid?
@@MrArtrock Sounds like grounding to me. Which is supposed to be excellent energies for your body and mind.
Does the base have to be square? Or triangular?
I need to make one I can fit inside sat on a chair
Hello Donny, The base is square. Email me at urbanshamanpyramids@gmail.com for more info. I will send you a photo of what it would look like.
How is the top and corners secured
does any of these work or just the shapes
would you do the same for continuity by looping wire for the PVC material?
Hi Barry, I would see no reason why that method would not work.
If I built a pyramid with a 8 foot base, what would be the length of the lateral poles?
Try around 7'7". That's only a rough guide as the measurements I provide take into account the diameter of the pipe being used and make allowances for my connectors. Since I don't know what pipe diameter you are using or how you are attaching the pipe to each other you will find that it wont create the sacred geometry but it will look similar. Hope this info helps Regards Mark
From the Ra Material:
"66.24 Questioner: There’s no best material?
Ra: I am Ra. There are better materials which are, in your system of barter, quite dear. They are not that much better than substances which we have mentioned before. [plastic, wood] *The only incorrect substances would be the baser metals.*
[see Dan Winter for the deleterious effect of base metal (eg copper, tin) on magnetism and water]
The Law of One Ra Material is available free online
Can you put Afterpay on your site thanks
They all work as described
Greetings, thank you for this video 🙏 I've wanted a pyramid to sit under when I meditate for many years, I'll have one soon as my father is going to make me one. I want to take mine apart so I can travel with it & being an ex plumber dad will know what kind of joints to use. Copper is my fave choice but I don't want it to tarnish, do you know if some kind of sealant like clear paint or something is ok to paint on it? I know I can scrub it to rid the tarnish but I'd prefer to not have to do that. Copper is expensive too so I've also considered using curtain dowel & paint a coat of copper paint on it- I'm sure copper paint exists. I know it's the shape/dimensions that make pyramids powerful so the materials used wouldn't make a difference to it's power but I don't want an aluminium one because of it's negative affects on our health. I'm not saying an aluminium pyramid would affect me it's more the idea of it for me- I'm a pedantic Virgo, haha!!
Hi Erinn. Google Incralac :)
@@urbanshamanmeditationpyram9970 thank you very much 🙏
Great video 👍🏽
Did the ancients set up pyramids to sit in, and for why?
Can pregnant women use pyramids?
ua-cam.com/video/q75t-m6mzjk/v-deo.html
I got from here
❤❤❤❤❤❤❤
Thx u so much mite
i would build it out of copper and place a bathtub inside.
For an explanation watch this. ua-cam.com/video/N4DE-UNqYWs/v-deo.html Hope it helps:)
Hi, would u share the measures please?
Hi , happy to share measurements however they won't be of any use without purchasing the connectors from www.urbanshaman com.au. The measurements I use for the pipe or tube incorporate an allowance for the connectors. This means without the connectors the pipe or tube would be marginally too short and would not create the correct angle to form the pyramid into the sacred geometry I speak of in my videos. Thanks for the enquiry:)
@@urbanshamanmeditationpyram9970 thanks, ill check your website