Guyzz all those who have any doubt regarding whether the concepts in this video are right or no they can watch the following video for complete understanding . ua-cam.com/video/UySm942McV0/v-deo.html
Bhai wrong hai ye Agar tum bhi techmax use kr rahe ho to ye problem techmax mai galat solve kiya hai Erosion ke liye condition rehti hai ki sare elements match ho gaye to center element 1 se change hota vrna center element 0 hoga N hit miss mai erosion use hota hai or is numerical mai sbhi element 0 ho jayenge coz aisi konsi bhi condition nahi aa rahi jisme sabhi elements of structuring element match ho rahe ho
No bro, he has taught correctly....you may refer one of his videos in his playlist where he has given proof of its correctness....it will surely help! :)
For hit or miss just erosion is used however, I also have a video on dilation here. Dilation and Erosion concepts ua-cam.com/video/_P_EkWkSz_o/v-deo.html Dilation shortcuts ua-cam.com/video/KXVoZEnbs6E/v-deo.html Difficult to understand dilation sums ua-cam.com/video/XUi26Fp-6bA/v-deo.html
In errorsion we consider bohut the seed element and 4 neighbouring element must match then we give it one but in case of inverse A and B2 there is a problem in 2nd row 1 st element in errosion matrix it should be 0 as the seed element do not match.
Sorry I could not understand your question properly Normally for a 3 x 3 structuring element the center point is taken as the seed point. Are you asking what will happen if we take the element in 2nd column in the topmost row as the seed point?
@@ramanhari6464 if the seed element is one then whereever you have one in the stucturing element at all those places you should have one in the image then only the output will be 1. For more clarity you can look at this video ua-cam.com/video/_P_EkWkSz_o/v-deo.html Here i have explianed dilation and erosion from the basic formula
What is the smallest number of different structuring elements that you would need to use to locate all foreground points in an image which have at least one foreground neighbor, using the hit-and-miss transform? What do the structuring elements look like?
Yes you are right that is because there were two structuring elements B1 and B2 given in the question. Only when one structuring element say B1 is given then we can assume B2 to be the compliment of B1
See, hit and miss aims to match the structuring element, exactly to the image . Now if you see the structuring element b1, there is no match of b1 with the image right and hence you will get all zeros. Hope that helps.
Yes you can refer to my other videos of image morphology and then short cuts on dilation and erosion to verify from the basics how they are right . Or else you can also verify from matlab
You are fantastic !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Please refer to my videos on image morphology i hav first exaplained them using the acctuall formulas and then given the shortcuts . You will fin them here Image Morphology: ua-cam.com/play/PLFXza2AmUJa-0tG-V0woFEb5eRe1-JDvC.html Also all my videos are based on the book digital image processing by Gonzales.
Yep, thanks for your reply Pratik Jain. You are absolutely correct but this answer is not expected one. As described in homepages.inf.ed.ac.uk/rbf/HIPR2/thin.htm, I make use of (figure -1) 8 structural elements (2 structural elements rotated by 90,180,270) . I tested it on imaged given Japanese letter (like hindi 3) in article, i am not getting the result as given above article.
What should i do here? is that doing as yours for four times ... first time consider original image and compute hit and miss transform and compute hit and miss transform on consecutive results of.
Thanks for your video. You said b2 is complement of b1, but if thats the case, b2 = [1 1 1;1 0 1;1 0 1], which is complement of b1=[0 0 0;0 1 0;0 1 0] . But i can see your b2 is [0 1 0; 0 0 0; 0 0 0] which i dont agree.
james tanaka here b2 and b1 both were given in the question ... I said when say only one structuring element is given say b1 then take b2 as the complement of b1
+Muhammad Adamu Sule please refer to my videos on image morphology and then the shortcuts that i have discussed The videos are in the following playlist Image morphology : Image Morphology: ua-cam.com/play/PLFXza2AmUJa-0tG-V0woFEb5eRe1-JDvC.html Also all my videos are based on the book digital image processing by Gonzales .
Please refer to my complete basics on image morphology operations and the shortcuts I have given the link below Image Morphology: ua-cam.com/play/PLFXza2AmUJa-0tG-V0woFEb5eRe1-JDvC0.html
Guyzz all those who have any doubt regarding whether the concepts in this video are right or no they can watch the following video for complete understanding .
ua-cam.com/video/UySm942McV0/v-deo.html
Thanks for explaining 🎉
Thank You very much Sir!!
Thanks this helped a lot
Seriously made my day 👏👏👏👏 awesome explanation
Bhai wrong hai ye
Agar tum bhi techmax use kr rahe ho to ye problem techmax mai galat solve kiya hai
Erosion ke liye condition rehti hai ki sare elements match ho gaye to center element 1 se change hota vrna center element 0 hoga
N hit miss mai erosion use hota hai or is numerical mai sbhi element 0 ho jayenge coz aisi konsi bhi condition nahi aa rahi jisme sabhi elements of structuring element match ho rahe ho
No bro, he has taught correctly....you may refer one of his videos in his playlist where he has given proof of its correctness....it will surely help! :)
@@vinayaksharma-ys3ip check other videos from other youtuber they have mentioned that all matrix should match not only 1's ... I hope you got uy
Sir, when u too compleent of, u forgot to make the second last row full 1..😁
Please understand I took A complement and not (A erosion b1) complement
@@pratikian got it sir..opps😁..Thank you so much for correcting me❤
@@Pishkoo 😇 all the best !
Sir through this topic erosion only happen or Dilation also happens ahh sir
For hit or miss just erosion is used however, I also have a video on dilation here.
Dilation and Erosion concepts
ua-cam.com/video/_P_EkWkSz_o/v-deo.html
Dilation shortcuts
ua-cam.com/video/KXVoZEnbs6E/v-deo.html
Difficult to understand dilation sums
ua-cam.com/video/XUi26Fp-6bA/v-deo.html
In errorsion we consider bohut the seed element and 4 neighbouring element must match then we give it one but in case of inverse A and B2 there is a problem in 2nd row 1 st element in errosion matrix it should be 0 as the seed element do not match.
Only the 1s should match.
Thanks brother.I will understand Ur concept.....
in a erosion b1 if seed point is in topmost row second coloumn then it should be one right??
Sorry I could not understand your question properly
Normally for a 3 x 3 structuring element the center point is taken as the seed point.
Are you asking what will happen if we take the element in 2nd column in the topmost row as the seed point?
If seed element is one then is it rule that one should be checked only placing it above 1 in the mani matirix
@@ramanhari6464 if the seed element is one then whereever you have one in the stucturing element at all those places you should have one in the image then only the output will be 1. For more clarity you can look at this video
ua-cam.com/video/_P_EkWkSz_o/v-deo.html
Here i have explianed dilation and erosion from the basic formula
What is the smallest number of different structuring elements that you would need to use to locate all foreground points in an image which have at least one foreground neighbor, using the hit-and-miss transform? What do the structuring elements look like?
Question -2 How can the hit-and-miss transform be used to perform erosion?
Question -3 How can the hit-and-miss transform, together with the NOT operation, be used to perform dilation?
7:14
I think in erosion complete structuring element shud be match...Correct me plz
Please see my video on erosion for complete understanding
No any of 1s are enough
thanks , dose the Hit And Miss called skeletons or it's another topic
Skelotonization is a differen topic for that you can look at this video from 25.02 min
ua-cam.com/video/JcldN7nUizo/v-deo.html
@@pratikian thank you so much
please what about the Euler do u cover it ? thank you again
@@ahmedalobaidy1 Euler number
ua-cam.com/video/LWtzN48xYaI/v-deo.html
Pratik Jain thank you so much 🙏.
in the given explanation b2 is not the compliment of b1 as first and last columns are same of b1 and b2
Yes you are right that is because there were two structuring elements B1 and B2 given in the question. Only when one structuring element say B1 is given then we can assume B2 to be the compliment of B1
@@pratikian okay sir understood thanks
Mumbai University question!! Thanks a lot!! :)
Tinu Khair most welcome
Good explanation
Thank you for the feedback ..😊
Wat about Gray scale morphology any videos on it?
taking b2 as the complement of b1 (if b2 is not given ),then we get final answer as all zero's which is wrong i feel!!!
See, hit and miss aims to match the structuring element, exactly to the image . Now if you see the structuring element b1, there is no match of b1 with the image right and hence you will get all zeros. Hope that helps.
for all those saying this is wrong, please get your concepts about erosion correct before commenting
Thank you so much for the support ..
It's actually wrong
@@pratikian you have to check all the 0 & 1 for erosion ... Not only 1
@@hardikkurdikar5872 please go through this video for more clarity
ua-cam.com/video/UySm942McV0/v-deo.html
Is this sum correct ? The method which you have applied to solve it ?
Yes you can refer to my other videos of image morphology and then short cuts on dilation and erosion to verify from the basics how they are right .
Or else you can also verify from matlab
I suggest you to please watch this video
ua-cam.com/video/UySm942McV0/v-deo.html
I guess they never miss, huh
+SOUND LION the zeros in the final ans represents miss and 1s represent hit
You got a boyfriend, I bet he doesn’t kiss ya
Hey pratik...ur videos are always helpful to mi...i request you to plz share the video regarding watershed transform..
Apurva ital thank you so much , Frankly speaking i have not studied the watershed transform so i wounldnt be able to make a nice video ..
Ok...:-)
You are fantastic !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thank u dost aaj pass ho jaungaaa😀😀
Most welcome .😊👍
For erosion refer to last-minute tuitons...he has got a better and easier explanation
What if three structuring element are given
have you seen a sum with 3 struvturing elements ?
Wrong concept for complement what you are saying is Dialation not Erosion
the results can be verified using the formulas that I have given in the first video of the series please refer it
I suggest you to please watch this video
ua-cam.com/video/UySm942McV0/v-deo.html
It's correct bro... It's erosion.
its wrong.. this is not erosion..
Please refer to my videos on image morphology i hav first exaplained them using the acctuall formulas and then given the shortcuts . You will fin them here
Image Morphology: ua-cam.com/play/PLFXza2AmUJa-0tG-V0woFEb5eRe1-JDvC.html
Also all my videos are based on the book digital image processing by Gonzales.
I suggest you to please watch this video
ua-cam.com/video/UySm942McV0/v-deo.html
How to make skeleton of text using hit and miss transform
Vesh Raj Joshi as in for ocr ?
Yep, thanks for your reply Pratik Jain. You are absolutely correct but this answer is not expected one. As described in homepages.inf.ed.ac.uk/rbf/HIPR2/thin.htm, I make use of (figure -1) 8 structural elements (2 structural elements rotated by 90,180,270) .
I tested it on imaged given Japanese letter (like hindi 3) in article, i am not getting the result as given above article.
What should i do here? is that doing as yours for four times ... first time consider original image and compute hit and miss transform and compute hit and miss transform on consecutive results of.
are you testing on matlab or just manually ?
no no i am not using matlab ... i am going through java and php(manually wrote code)
Thanks for your video. You said b2 is complement of b1, but if thats the case,
b2 = [1 1 1;1 0 1;1 0 1],
which is complement of b1=[0 0 0;0 1 0;0 1 0] .
But i can see your b2 is [0 1 0; 0 0 0; 0 0 0] which i dont agree.
james tanaka here b2 and b1 both were given in the question ...
I said when say only one structuring element is given say b1 then take b2 as the complement of b1
thanks!
first u will learn clearly then explain
Thanks for the feedback will try harder ..👍
Acche se padh ke padaya kro
Teri wjh se mere 2 hrs waste hue
Aur itna confusion alag hogaya
Tq sir....
Happy to help ..😊
이거 들어도 이해못하겠음 모서리는 어케되는거냐
na s i am sorry i cannot understand your language ..
Bhai kyu wrong sikha rha hai erosion hai dilation nahi
Bhai please ek baar yeh video dekh le
ua-cam.com/video/UySm942McV0/v-deo.html
This is wrong method !!
Please look at this video for more clarification
ua-cam.com/video/UySm942McV0/v-deo.html
this is wrong
+Muhammad Adamu Sule please refer to my videos on image morphology and then the shortcuts that i have discussed
The videos are in the following playlist
Image morphology :
Image Morphology: ua-cam.com/play/PLFXza2AmUJa-0tG-V0woFEb5eRe1-JDvC.html
Also all my videos are based on the book digital image processing by Gonzales .
I suggest you to please watch this video ..
ua-cam.com/video/UySm942McV0/v-deo.html
Wrong explanation
Please refer to my complete basics on image morphology operations and the shortcuts
I have given the link below
Image Morphology: ua-cam.com/play/PLFXza2AmUJa-0tG-V0woFEb5eRe1-JDvC0.html
I suggest you to please watch this video
ua-cam.com/video/UySm942McV0/v-deo.html
Pahale khud sikh kr aa , confusion mat kr
I suggest you to please watch this video .
ua-cam.com/video/UySm942McV0/v-deo.html
Wat about Gray scale morphology any videos on it?
Gavin Dsouza ua-cam.com/video/JcldN7nUizo/v-deo.html
Start watching from 39.21 mins
Wat about Gray scale morphology any videos on it?