Easy Way to Sharpen Husqvarna Riding Lawn Mower Blades Without Lift ||YTH18542|
Вставка
- Опубліковано 7 жов 2024
- All of our Gear can be found on our Amazon Storefront.
www.amazon.com...
There is no extra cost, we just get a small percentage of purchases.
Jamaica Cottage Shop Quality Outbuilding Kits
jamaicacottage...
We do receive a small amount of commission from your purchase but it does not cost you any extra.
Easy Way to Change Husqvarna Riding Lawn Mower Blades Without Lift ||YTH18542||
Today we sharpened our Husqvarna YTH18542 using a standard vehicle jack. We all know that nobody actually has those lawn mower lifts to do this. You could also apply the same thing if you are going to replace the blades instead of sharpening. This installation process will work with your John Deere, Cub Cadet, or Craftsman Lawn mowers, just make sure you have the correct replacement blades.
Here are the links to the blades. If you use our affiliate links it helps supports our channel, we get a small commission it but doesn't cost you any extra.
42" Mulching Blade Kit
amzn.to/2FFXYDR
42" High Lift Blade Kit
amzn.to/3he9yno
Please consider Subscribing so you can Break Free with us, we provide new content every week: www.UA-cam.com/user/b...
Follow us on:
Instagram - / break_free_homestead
Facebook - / breakfreehomestead
www.tubebuddy....
Music;
Hit My Soul; Silent Partner
If this video helps you out hit that 👍👍👍👍
You got a great “cut to the chase” presentation 👌👍✔️
Thanks you, So many times, UA-camrs add way too much, unfortunately…
Good job again, I feel absolutely that is to get it done on mine, I liked and subscribed keep it up
Made that look so easy.
Its too easy! 💪💪
Thank you! This is going to save me a life time of trouble
Awesome! Thanks for supporting our channel Donte!
Thanks for the time.👍
Thanks for the video, looks easy enough!
Thanks for supporting our channel Bob! Hopefully you got it done without issue.
Gee thanks she fast forward through the where I needed to know how to sharpen them
Very informative !
Great guide. Thanks 👍
Thanks so much for supporting our channel! Glad it helped!
Make sure you show in plugging spark plug for safety 🦾🦾
You need to disconnect the negative terminal....it's still "hot".
Awesome video. Thanks. I'm going to see if I can drive mine up onto car ramps. That would accomplish the same goal and maybe be easier then using a jack for me.
Thanks! Yeah that should work as long as it clears.
Using car ramps the ramp part of car ramps get in the way
@@justinberry3991 I wondered if that might be a problem
Very helpful. Thanks
Glad it was helpful!
My God! Who allows the deck's undercarriage to get into that condition. Keeping it clean is a better way to maintain the deck's condition for years. I learned the hard way and I hosed after ever usage. The deck gave out and I could not find a deck for my Craftsman lawn tractor. After only 4-5 yrs old, and manufacturing stopped. I had to discard the deckless tractor. If one gets on a driveway/patio, lowers it to #1 ground level, and puts the hose into the clean threaded threads and turn the water on (and engine running with blades turning for about 5 minutes, it can go a long way to removing lots of hard mud and grass).
Lol never ever use water it will rot out so fast
Use compressed air instead then use a sprayer mix diesel & oil & coat the undercarriage with the wand
Charlie that may well be so. Two things. One, using the water cleaning inlet with hose attachment is supposed to do the job. However, it barely does anything more then wet underneath the deck. I do use the spray/cleaning attachment with hose, but on a pavement/driveway, I turn the motor on and then the deck lowered to "O" allowing strict underneath cleaning and the grass, mud etc. cleans it thoroughly. Then when clear water had emerged visually, I know the underneath was done. Without the water, I turn it on with the deck raised and without water and it dries underneath. The whole process takes about 5 minutes. Secondly when the deck is under warranty for 10 years, I don't fret IF it should rot and a new once replacement is on the way to repairing it.
Thank u friend 💪🏿💪🏿💪🏿💪🏿💪🏿
Always welcome
my bolt is really on there...did they use a impact to put these on?wow
Oh man, good luck. Grab a breaker bar or improvise.
I drop the wheels down on those blocks just for the fact that when the jack does slide off the deck hanger mount I don't have a heart attack.
At 3:00
Daaaamn you need to mow! lol
I would have disconnected the spark plug wires before attempting to remove the blades.
Why's that? Has yours started itself before?
Ahhh….the old deadly phantom self starting mower
@@BreakFreeHomestead If you spin the blade, isn't the idea that it could kick on the motor, potentially? I am with Larry here. My dad always told me to pull the spark plug wire! Wrong?
@enblanchard5492 if you start the motor with the deck blades disengaged do the blades spin? How would the blades spinning start the motor and engage the pulley? Wives tale.
Here we go...
No way our mine going to get loose that easy. His bolt came loose awfully easy also I think he skipped the part where he had to fight to loosen it
Why not just take the deck off, take blades off, then clean the deck so it doesn't rust out, then sharpen blades with a file in a vice or grinder???
Thats always an option!
Because its a 4 minute video, not 40 minute vid.
@@BreakFreeHomestead I have a question ? Do the positions of the blades matter when putting new ones on?