Axe Restoration [Satin Axe Head With Walnut Handle]
Вставка
- Опубліковано 3 лис 2023
- Remove rust with cola? That's supposed to work? In this restoration of this extremely rusty old axe I will try... But of course I will also restore the complete axe, that means I will harden, quench in oil and water, file, grind, polish, cut with the band saw and saws and more. It will definitely be hot because it burns, but also very cold when you quench it.
▶ What did I do ?! ◀
I remove the coarse rust with a wire brush, then soak the extremely rusty axe head in cola and try to remove the remaining rust. I work on the contour with a belt grinder, an angle grinder and files. The axe head is then heated to 800°C/1472°F and quenched in 80°C/176°F oil. I then sanded the surface with sandpaper up to a grain size of 800. I made a new handle from walnut wood as the old one was no longer available. Now just rub the handle with linseed oil and hammer in the old wedges, and the new old axe is finished.
▶ Good to know ◀
I used the following tools: Wire brush, cordless screwdriver, drill, Bunsen burner, pin punch, hammer, brush, file, angle grinder, cut-off wheel, belt sander, hardening oven, oil, immersion heater, forging pliers, thermometer, oven, water, spatula, orbital sander, sanding fleece, polishing block, polishing paste, adhesive tape, pencil, knife, tweezers, band saw, calipers, sandpaper, saw, whetstone, linseed oil varnish
▶ Special thanks to my channel members! ◀
⭐Fred Chipps
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material for work:
Metabo bench grinder amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL amzn.to/43833JV
Metabo bit set amzn.to/3pzwV4n
File set Gedore amzn.to/3NWmXU1
Sandpaper file amzn.to/3PBNo2D
Forging pliers amzn.to/3OGhG1T
Polishing paste amzn.to/3DYfHRA
Rust Remover Spray: amzn.to/48r91te
Immersion heater: amzn.to/3EOKrVE
Wire brush: amzn.to/3u1L6RC
Thermometer: amzn.to/40nAf0k
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot! - Наука та технологія
Love that you saved the wedges. Makes the restoration seem more heartfelt. Great job as always!
Thank you very much! ❤🐢
I always love seeing videos like this. Just so relaxing.
Nice to read... 🐢
Is it a coincidence that this morning I was laying in bed and thought to myself “hmm. I wonder when he’s gonna post again” Well I guess I know now. -edit- just came from my brothers account, can’t believe this is the current top comment ❤
Uh huh
No, that can't be a coincidence ❤🐢
Beautiful job! The entire video was excellent. I especially liked the sanding progression on the axe head, interesting to see the differences between the grits.
Bro what a coincidence
Gute Arbei
Love to see you trying out new things with your editing and videography, while the restorations are always a treat. We're getting closer to the definitely still secret blue turtle reveal, too, aren't we? 🎉😊
Many thanks for the praise! Yes, at some point the turtles have to speak out...🐢
Nice work . The pitting gives it nice character
Thank you for the videos. They help me sleep! Greetings from Brazil 🇧🇷
That makes me very happy! Everyone uses my videos in a different way! ❤🐢
Awww, I enjoyed getting to see turtle's real face. She looks so sweet 🐢
Great video! Love the sanding grit comparison shot! And good to see turtle helping!
Great to read that you like the shot so much, thanks for the feedback! Of course turtle always helps me out! 🐢
@@ForgottenShineRestoration Turtle is awesome! So many great expressions
Beautiful craftmanship! The axe result was amazing and watching the video was delightful. Thank UA-cam for postín.
Thank you very much for your great feedback! 🐢
Well done! I like how it came out and the close-up camera work was bonus.
Thanks a lot! 🐢
Amazing craftsmanship. Thank you.
Thank you, too! 🐢
beautiful result... thnx for sharing...
BRAVO
Отличный ролик! Но стоит чаще прибегать к помощи угловой шлифовальной машинки.
ok. Где, например? 😅🐢
Parabéns vc é um ótimo profissional!!!!
Obrigado! 🐢
Excellent video, thanks!
Thanks! 🐢
This is what cleaning my room is like. A lot of dust, scraping, and Coca Cola everywhere
🤣🤣🤣 funny 🐢
Es un pasada verte trabajar , felicidades un trabajo perfecto 👍
Muchas gracias por su magnífico comentario.🐢
I'm going to admit when I saw you wash it in coca-cola I was dubious but when I saw the quenching and how well done it was my faith was restored
Good video
Thank you! 🐢
@@ForgottenShineRestoration np
Ефект від Кока-Коли просто неймовірний !!
🤪😅🐢
Super great restoration. 👍👍
Thank you! 🐢
Great job 🎉 well done ❤
Thank you very much! 🐢
Finally 🎉
Perfect work!]
Thank you very much! 🐢
FSR its good to see you in the lab again... Very nice work, it turned out beautiful... Take care my friend...
Thank you very much for your praise! Take care of yourself too! 🐢
i dont know why, but these types of video help me sleep 😭
maybe its just the sound like almost background noise, but i genuinely cannot sleep without these videos playing so thank you LOL
That's great, isn't it? 🤩🐢
Love your work. You have always shown the pink turtle. I like the blue one too. I’m sure they are good assistants.
Thank you! Yes, these are really good helpers 😎🐢
It looks great and you did a wonderful job restoring it as well!!!!
I enjoyed your video so I gave it a Thumbs Up for the support of your channel
Thank you very much! I'm really looking forward to reading from you again! 🐢
The closeup camera looks great!
Thanks! 🐢
Хорошая работа!
Большое спасибо! 🐢
Super job !!!!.
What a beautiful way to illustrate how not to hang an axe head.
Hace rato no me pasaba por aquí, estoy feliz de haberlo hecho 🐢🐢🐢
Bienvenido, me alegro de volver a verte. 🐢
Hello mister beautiful restoration beautifully restored good job well done
Hello mister super great beautiful Commentator 🐢
Its scary that coke and rust remover have one of the same ingredients
😅😅🤔🐢
I’m interested in getting into metal restoration a little. How do you protect the surface, especially the pits from getting surface rust? And what kind of belt sander is that, looks quite unique?
Thanks.
After restoring I always spray the parts with oil, but the polished surface alone makes the metal very difficult to rust... 🐢
Gorgeous!
Thank you!🐢
Richtig coole neue Perspektiven 🎉
Die Axt sieht am Ende richtig Hammer aus. So eine hätte ich gern ❤
Vielen lieben Dank für das tolle Feedback! 🐢
Wow well done and love the editing!
Thank you! 🤗🐢
Hello from Jamaica 🇯🇲🇯🇲🇯🇲❤❤❤
Hello from Germany 🐢
Прекрасная работа 💪💪💪💪
Большое спасибо! 🐢
Good job
Thanks! 🐢
Me quedé con las ganas de que partiera en poco de leña con el hacha :(
So what was the flaking after the oven
Amazing work as always.I was expecting some welding done on the pitting, although was not really necessary.
You are good amigo,please keep these videos coming.
Greetings from Toronto.
Thank you for the great feedback! 🐢
It looks great and you did a great job
I really appreciate your talent and ingenuity! I find it more expensive to restore electricity than to buy a new one.
Just like I ordered scrap to sell to them, I went to the market to buy 10 new axes to use quickly🤪🤪🤪🤪
喜欢
"Im using coke to remove the rust" Axe came out of the exactly like it was when he put it in
Przepięknie jest to odrestaurowane ta bardzo mocno stara siekiera pozdrowienia serdeczne pozdrowiam serdecznie 👍👍👍👍👍👍👍👍
Dziękuję bardzo! 🐢
Шутка с колой понравилась.
Excellent job
Thank you very much! 🐢
Give this Man An Oscar!
🤭🥰🐢
Amazing job, glad you’re having fun with it too! Curious if the soda really did anything?
No, the cola didn't help at all. Better to use conventional rust remover! 🐢
@@ForgottenShineRestoration Or electrolysis ... maybe with cola?
Restaurado machado 😉
Черепашка ваша смотрю вовсю помогает в хозяйстве! Где такие помощницы продаются? 😊 Парочку бы купил! Ну а вообще топор получился очень хороший! А эти язвы ржавчины придают некоторую брутальность. Как будто это топор достался от деда 🤔 У меня кстати имеется топор, что сделал на заводе мой дедушка ещё в старые добрые 90е. Он чисто из металла. Хорошего металла. 20 лет пролежал в сыром погребе. И за это время лишь немного поржавел. Сталь топора весьма качественная была 😊 Благодарю за работу, Мастер! 👏👏👏🙏
Большое спасибо! Да, я полагаю, что все зависит от производителя, какую сталь он использует. Я также придерживаюсь мнения, что качество продолжает снижаться, поэтому постоянно приходится жевать что-то новое... 🐢
Great video
Thank you! 🐢
Que delícia um vídeo novo seu. O melhor🤩🇧🇷🇧🇷🇧🇷
É bom voltar a ver-vos aqui! e ainda mais bom que gostem! Com os melhores cumprimentos 🐢
Nice 👍👍👍
Отличная работа. Если не секрет - паста синего цвета , для полировки - что за паста? Какая гридность у неё?
Большое спасибо! Конечно это не секрет, вот ссылка: amzn.to/3R7i388 🐢
Great job buddy but electrólisis is much better Say hello from Venezuela 🇻🇪👏👍🏻🤘
That's right! Many greetings to Venezuela 🐢
Beatiful 👍🪓 restoration Congratulations 👏 Greetings from Belgium 😉🇧🇪👋🐢
Thanks a lot! 🐢
12:43
Turtoise: Errr.. Buddy, I think we have a problem here...
Buddy: Well, we just won't show the top of the axe any more so nobody will ever see the frigging mess I made with these damn wedges.
I wish I could do that
Why not? 🐢
Y yo bebiendo una coca cola viendo el vídeo.
🤪🤣🐢
“It’s not necessary but it’s fun”
Well no, that makes it necessary then, maybe not necessary to the restoration, but having fun and enjoying yourself is most definitely necessary
Thank you! This is really great feedback! ❤🐢
B E A U T I F U L 😊! ! ! !
T H A N K S ! ! ! 🐢
Nice to see Turtle. Who is his blue friend who was shown in another video? Please keep posting. I have missed your videos. 🐢
Exceso de medios para un rescate fácil. Quedó bien para lucimiento y exposición pero no para trabajo. Para trabajar con el hacha y tener un buen control de la herramienta durante el corte necesitaba un mango un poco más largo para su peso y un mango recto y más plano para indexar mejor. Con un mango redondo es fácil perder la orientación en el corte o el labrado.
Tampoco entiendo para que se templa otra vez si solo se le ha sacado el óxido mediante un lijado. Parafinalizar, no hemos visto que grado de afilado se le hizo y si corta. No quería ver la típica tontería de cortsr una hoja de papel si no como cortaba madera.
Pero bueno, como vídeo de entretenimiento está muy bien grabado. La utilidad es más discutible.
Отличная работа. Чтобы масло не воспламенялось нужно опускать на глубину более 20 сантиметров.
Хорошо, спасибо за подсказку. 🐢
Soooooo beautiful
Thank you! 🐢
awesome
does not look like the cola worked lol
true! 🤣🐢
Bro have more weapons than Avengers 😂
🤣🤣🐢
Exc work, but wondered why the wasted dripping oil....
Who was original manufacturer?
Didn't... you do an ax video with cola before? Or am I thinking of a different video?
nope... 🐢
Nice restoration but he really need a blast cabinet You could sandblast a bead blast off that rust so much faster
Thank you! I have a blast cabinet, but wanted to test whether cola is really suitable for rust removal... 🐢
Seen another guy test a bunch of rush from universe his channels called project form cola did shitty vinegar did okay if Apple rust and cried cutter did the best
Tolle Arbeit wie immer! Jetzt ab in den Wald zum Holzhacken 😂🐢
Vielen Dank! Zum Glück bin ich schon "winterfest" und brauche kein Holz mehr hacken... 😅🐢
You only have one member?
Only one member in the top tier. I also have more very nice members. 🐢
Was that Tippy and Teri the turtle???
So that notch is meant to be there.... what does it do?
Opens beer bottles
Глубокие каверны от ржавчины удаляются следующим образом:
1) Производим нагрев и отпуск металла.
2) Завариваем каверны электродной сваркой
3) Снова закаляем металл.
И всё)) разницу между сваркой и основным металлом невозможно разглядеть.
P.S. Мистер Черепаха нормальный парень 😁
Просто завари каверны и закали.
А кто увидит разницу между металлом - скажи что это дамаск.
Good job of it, better than I though it would come out, one quick qestion, does your turtle have a name? I sure do see him alot.
Thank you! Yes, turtles name is "turtle" 😅🐢
@@ForgottenShineRestorationfucked up buddy
Use coke to wash Rusty axe ?
Kompliment 👍👍👍
Vielen Dank! 🐢
что за модель гриндера?
Я купил ленточную шлифовальную машину на сайте vevor 🐢
7:13 sus
What if you mix vinegar with cola ?
🤔🤷♀️ I dont know... 🐢
8:29 love watching you make handles with wood. Just as good as the metalwork. Keep up the good content 👍 😁
🤣🤣🤪🐢 Thank you!
❤🎉
Well, its better than drinking it I suppose...
😅🐢
7:13 me when your mom
Why did I laugh so hard when I clicked on the timestamps..... 🤣🤣🤣🐢
❤🎉😮
🤗
Hast du dich jetzt auf rostiges Altmetall spezialisiert ? Ich frage für meinen Schrotthändler. Es soll auch Leute geben, die Cola trinken ! Rostprobleme im Darm ? Ich habe immer gute Ergebnisse mit einem Anti-Rost-Tauchbad erzielt. Ist natürlich teurer, aber länger verwendbar. Ansonsten super Ergebnis, so was MUSS alt aussehen !
Ja, Metall bearbeiten gefällt mir besonders gut. Die Cola war ein Versuch, der zeigen sollte das andere Verfahren besser sind. Ich sehe öfters das Cola so gut sein soll und habe es deshalb für alle einmal getestet...🐢
Nice job! 👍🏻
Too bad for the crack on the handle at the end... 🥲
Thank you very much! You have a very good eye for detail! 💪🐢
1ro en comentar❤
¡Felicidades! 😎❤🐢
🤩🤩👍👏👏👏
😎🤩🐢
👍👏👍👏👍👏👍👏👍👏👍👏🥃🥃🥃
To nie topór. To siekiera.
✌🏼🇦🇲✌🏼