300Tdi Checking glow plugs and leaks prior to fitting
Вставка
- Опубліковано 10 лют 2025
- Be part of this channel! = britrest.com/s...
Shop 'till you drop = www.britrest.c...
utreon.com/c/b...
www.paypal.me/...
/ britrest
Your support is appreciated!
If you have a Defender/Tdi problem and do not know how to fix it, drop me a line!
Maybe I can help!?
britrest@britrest.com
Send me a postcard for my wall!
Britannica Restorations Ltd
9 Ch. Rawson
Sherbrooke
Quebec
J1M2A3
Canada
Mike the olive's was a good one.
That will go in my memory 👌
Been doing this stuff for 40 years, on and off, and I've never seen that trick with the olives............. thanks Mike, I'll probably never have to do one now.......
Far better than fiddling about on the motor!!
That's looking superb, who ever ends up with that is going to have a great staring point for future maintenance.
Hope so!
Mike, it's what I found with my old 300Tdi, lose the vacuum pump, lose the mechanical fuel pump, replace with electric pumps, 95% of your oil leaks will disappear. And Nigella Lawson, phawww, bewdifull, now your talking!!!
my wife is pottering around our kitchen listening to you ,while i watch your videos and she said he's so funny to listen too ,and she even says good evening mike when i put you on. keep up the good work,Dave & lisa south wales uk
Wow, thanks
Mike, you are right about the cheap Chinese lift pumps. The only lift pump I’ve ever found that didn’t leak or fail prematurely, were the old AC lift pumps. However, finding a NOS AC pump is the issue. Imagine they are no longer made. Great video!
Shows the advantage of not power washing down the engine before dismantling.
My TD5 pump sounds just like that. 🤣
Cheers King Mike 🥃
Hi Mike 👋 just saying thanks again for sharing this video update and information 👍👍👍🇬🇧🇬🇧🇬🇧🚌🚌🚌
No problem 👍
Can you use the aluminium antiseize on must parts ?
Yes - for me it is an all round anti-seize - I use copper or nickle on exhausts, but I have found the copper does dry out
Did you ever workout at good way to get glowplugs out? (the nasty ones) ! A guy in UK who btw has a 400hp S1 , suggest to run the engine real hot and then shock them out with a tiny impact.... It sounds tempting , but on the other hand , running the engine hot , will it not squeeze the plugs even tighter?
Difficult - they tend to carbon up at the tips = this is why that are tight
If you can get them to turn, maybe time and good penetrating oil will do the job - maybe 1/4 turn at a time, back and forth
I have a kit for drilling them out and inserting a thread - that is hit-and-miss, so if they do snap off at the bottom, it's off with its head and punch the tips out
Hi Mike, must have a slip of the tongue, to anneal copper you need to heat and then drop into cold water, if you let it cool gradually (like steel) tempers it (unlike steel).
You can do it both ways - try it!
Mike jaką farbą malujesz silnik .pozdrawiam
did you buy the caps as a set or just pick them up as you go along ie the large ones as well?
also just looking on line the only pump i can see that comes with a spacer is the brit part one + its the cheapest one LOL
I bought them as a set of 10x each off EBay years ago
I have never seen a pump supplied with the spacer - listed in the parts book as 'no longer serviced' - Nor have I seen one fitted to an old engine
Do you have the part number for the nut you used to tighten the olive onto the lift pump.Ta
www.lrworkshop.com/parts/NTC1612
@@BritannicaRestorations Thanks for that👍👍
On my 300tdi engine I found 2 censors on the bottom of the thermostat housing and can't find them in the part's manual it was Elwood censor's
www.lrworkshop.com/parts/PRC3359
www.lrworkshop.com/parts/PRC3505
@@BritannicaRestorations thanks 👍👍
Was looking at the oil leak from my lift pump yesterday!
Do you have to take the injector pipes off to get at it?
No you don't have too
You struggle to get the pump off without removing the pipes - far simpler to take the pipes off and then get the gasket nice and square
THERE IS A LANDROVER REPAIRER WHERE I LIVE IN AUSTRALIA WHO HAVE THESE CASTINGS BUILT UP AND MACHINED ACCORDINGLY AND REUSED.
David. If you press the caps lock key once, the typeface goes back to lower case and stops you from ‘shouting’. Cheers mate. 👍🏻🙏🏽🦘
@@grahameroberts8109 SOME PEOPLE NEED HELP, NO CHEERS!
I believe David is visually impaired..
@@BritannicaRestorations FINE fine FINE
Well there is someone who always writes with the caps on as he cannot read the screen - thought it was you
If a mechanic is careless and doesn’t cover up holes and pipes on the engine, take them up in a single prop plane with a sputtering engine. They then realise the importance of the lesson! 🤪👍🏻🙏🏽🦘
I think that your anti seize brush only has about five to ten years left in it.
Another thing not made to last....
lol!
Bloody lift pumps strike again!
Never ending story!
I reckon glow plugs should be a service item, like spark plugs...
Should be checked in a cold climate!
Is that machine really a Hookah bubbling away at your Shisha ? Lol
lol!
nothing coming out NOW - wait a few hundred miles
Don't know about Popeye?
But wasn't she married to 'Arthur' in On The Buses?
Mike. Young Nate at his "Dirt Lifestyle" YT Channel might be interested in your remainder 300Tdi/R380 for his D2a ? ? Get in touch with him in Tacoma, WA ! V.
Need them for exchange units