this is what i am actually looking for.. i have installed 32 cameras 6 of them showing no resource but when you enlarge the screen you can actually see the view. and its recording too.. the only problem is the live preview
Hi, bro this one same problem here but when we check 2:2 or 4:4 cameras online view that’s working but when we show all 32 camera on screen then this problem is coming. Can I solve this trick.
Great video but it did not fix my issue. I have 4 cameras 2 of which are working and two showing no resource. I tried setting all 4 to the same nothing changed. I tried putting the two not working to lower resolution and nothing. Several different combinations have resulted in the same outcome. Not sure what to do from here.
I tried this already and when I’m trying to click a camera with no resource issue, a settings failed pop up message will come out. Is there anything I have to enable in order for me to change the bitrate and resolution of the camera?
What if I dont want to lower recording resolution? Do higher NVR models suffer from this issue and if not what values they have better than cheaper ones?
my line crossing and intrusion use to work, i turned it off because the neighbours cats kept setting it off and now when i want to enable it again it is telling me" Not enough resource for human body analysis engine" why is that? I have the Analytical Acusense and Colorvu camera. Please can you help
I sorry, but this is not a FIX ....... Why would you compramise or sacrifice your Recording Quality/Resolution for sake of your Live View??? ............ The Recorded Video need will be what provides the Evidence when/if needed, Not the Live View!!!! ..........................A simple Solution to Eliminating the "No Resource" notification: 1. On the Multiple View Screen, Make sure NO cameras are displaying in Main Stream Mode ( should all be Sub-Stream 2. Split the Camera Live View on the Multiple View Screen options. Instead of displaying all 32 Cameras on One Screen, try using 4x4 (16) option & Switch Mode or 5+1 etc
Hi all. I got annke 4k cctv set with 5mp cameras, and I got x1 hikvision 8mp 4k 60m camera too. But on setting it don't show 8mp, only 4mp for hikvision. How I can make it to go up 8mp?
Having a mare with my DVR. Have you ever seen a problem with suddenly all the cameras on the DVR Live View just shows "No Permission" for each camera?. Its a VGA monitor directly connected to DVR. If you move the mouse and unlock it...you see all the cameras again. Once you leave in Live View...after 10 mins...blank cameras again all showing "No Permission". Connect via Hikvision app or internet explorer...shows all fine.
look in the settings for "Live View Permissions" ........ Normally located in a submenu in the Camera Parameter tabs. will more than likely ask you to Input a Password
@@CombizzTechnologies Actually what will help with alot for the NVR is making sure the layout of HDMI1 is the same as HDMI2/VGA as this will have less impact on the videocard.
This music is just PERFECT for this video. I love it! Just what I needed when trying to concentrate solving hardware issues.
this is what i am actually looking for.. i have installed 32 cameras 6 of them showing no resource but when you enlarge the screen you can actually see the view. and its recording too.. the only problem is the live preview
Thanks☺️. Please support and share. Stay connected 🙏
Hi, bro this one same problem here but when we check 2:2 or 4:4 cameras online view that’s working but when we show all 32 camera on screen then this problem is coming. Can I solve this trick.
Great video but it did not fix my issue. I have 4 cameras 2 of which are working and two showing no resource. I tried setting all 4 to the same nothing changed. I tried putting the two not working to lower resolution and nothing. Several different combinations have resulted in the same outcome. Not sure what to do from here.
Excellent tips and tutorial about how to fix 404 error ... wonderful tips and subscribed my friend 😍👏
Thanks☺️. Please support and share. Stay connected 🙏
Combizz Technologies done my friend 🙏
music is annyoing but this solved my problem. 4x 4k streams is completelly needles anyway.
Thank you for your comment.
I tried this already and when I’m trying to click a camera with no resource issue, a settings failed pop up message will come out. Is there anything I have to enable in order for me to change the bitrate and resolution of the camera?
What if I dont want to lower recording resolution? Do higher NVR models suffer from this issue and if not what values they have better than cheaper ones?
my line crossing and intrusion use to work, i turned it off because the neighbours cats kept setting it off and now when i want to enable it again it is telling me" Not enough resource for human body analysis engine" why is that? I have the Analytical Acusense and Colorvu camera. Please can you help
If you do have Accusense from Hikvision then it should be set off only by cars and humans not by cats 🤔
Thanks, I almost broke the NVR with the hammer because of that issue 😂
I sorry, but this is not a FIX ....... Why would you compramise or sacrifice your Recording Quality/Resolution for sake of your Live View??? ............ The Recorded Video need will be what provides the Evidence when/if needed, Not the Live View!!!! ..........................A simple Solution to Eliminating the "No Resource" notification:
1. On the Multiple View Screen, Make sure NO cameras are displaying in Main Stream Mode ( should all be Sub-Stream
2. Split the Camera Live View on the Multiple View Screen options. Instead of displaying all 32 Cameras on One Screen, try using 4x4 (16) option & Switch Mode or 5+1 etc
My idea also
Thank you for your comment and advice. We will try to make another video showing different solution. Again, thank you. Much appreciated.
Also by changing the resolution on the camera the FOV ( field of view ) will change too which defeats the object of having 4K cameras
Hi all. I got annke 4k cctv set with 5mp cameras, and I got x1 hikvision 8mp 4k 60m camera too. But on setting it don't show 8mp, only 4mp for hikvision. How I can make it to go up 8mp?
Buy qn NVR capablr of Displaying & Recording 8MP Cameras
Thanks for the video, it helped me out.
Having a mare with my DVR. Have you ever seen a problem with suddenly all the cameras on the DVR Live View just shows "No Permission" for each camera?. Its a VGA monitor directly connected to DVR. If you move the mouse and unlock it...you see all the cameras again. Once you leave in Live View...after 10 mins...blank cameras again all showing "No Permission". Connect via Hikvision app or internet explorer...shows all fine.
look in the settings for "Live View Permissions" ........ Normally located in a submenu in the Camera Parameter tabs. will more than likely ask you to Input a Password
thank you so mush .... BIG LOVE
Hi. Can you do a video on HIK Vision DVR showing No Video. I am currently experiencing this issue.
Thanks☺️. Please support and share. Stay connected 🙏
It helped me thx soo much
supaya ip camera bisa di akses dari luar kota terus dibagaimanakan ya kak
Thanks
very very usefull video
¿Y la calidad de la grabación también disminuye?
Thank you for your message
Not working for me
thanku
LOL so you buy 2 mp camera's and then you downgrade them to 1.3mp. That is not a good solution as the recorder will be more blurry.
Thank you for your comment. We will take your advise.
@@CombizzTechnologies Actually what will help with alot for the NVR is making sure the layout of HDMI1 is the same as HDMI2/VGA as this will have less impact on the videocard.
Video not clear bro...
Yeah sorry for that. We will make another video related to this. We will make the video more clear and detail. Thanks. We appreciate your comment.
Thanks☺️. Please support and share. Stay connected 🙏
Vai trai kore dekhlam hoche na
Kuchh bhi samajh nahi aa raha hai aage ae jab bhi video banaye clearty ka dhyan rakhe
Thanks☺️. Please support and share. Stay connected 🙏
i can it
Bakbas.................abe itani tez sound dal rkha hai...bina sound ka hota ,,
This video is not clear ... So it's a waste
Thank you for your comment. Have a good one Sir.
So helpful thanks for the info 💕
Glad it was helpful!
Thanks☺️. Please support and share. Stay connected 🙏
Thanks