Three Wheel Modified Light System - හෝන්ගාඩ් ලයිට් සිස්ටම් එක ගැන ලංකාවේ පළමු වීඩියෝව

The WS2811 is a popular integrated circuit (IC) commonly used in addressable RGB LED strips and pixel lights. It allows individual control of each LED within the strip or pixel light, enabling dynamic lighting effects and patterns.
Here's a brief overview of how it works:
Digital Control: WS2811 LEDs are digitally controlled, meaning that you can send digital signals to them to set their color and brightness individually.
Addressable LEDs: Each LED has its own built-in controller, so you can address and control them individually or in groups. This allows for complex patterns and animations.
Communication Protocol: The WS2811 LEDs typically use a simple communication protocol to receive data. The most common protocol is the one-wire communication protocol, where data is sent serially to the LEDs.
Color Mixing: With WS2811 LEDs, you can produce a wide range of colors by adjusting the intensity of each of the three primary colors: red, green, and blue (RGB).
Power Requirements: It's important to note that WS2811 LEDs can draw a significant amount of power, especially when many LEDs are illuminated at full brightness. Therefore, it's crucial to provide an adequate power supply to ensure proper operation.
Overall, WS2811 LEDs are versatile and popular for various lighting projects, including decorative lighting, signage, and art installations, due to their flexibility and ease of control.
The Arduino Nano is a small, versatile microcontroller board based on the ATmega328P microcontroller, similar to the Arduino Uno but in a smaller form factor. It's a popular choice for projects where space is limited or where a smaller footprint is desired.
Key features of the Arduino Nano include:
ATmega328P Microcontroller: The Nano is powered by the ATmega328P microcontroller, which has 32KB of flash memory for storing your program, 2KB of SRAM, and 1KB of EEPROM. It runs at 16MHz.
USB Interface: The Nano can be connected to a computer via a USB interface, allowing you to upload code to it and communicate with it serially. It typically uses a micro-USB connector for this purpose.
I/O Pins: The Nano has a total of 14 digital I/O pins, 6 of which can be used as PWM outputs. It also has 8 analog input pins.
Power Options: The Nano can be powered via USB connection or an external power supply. It has a built-in voltage regulator, allowing it to accept a wide range of input voltages (typically 7-12V).
Compact Size: The Nano's small size (about the size of a credit card) makes it suitable for projects where space is limited or where a compact design is desired.
Compatibility: The Nano is compatible with the Arduino IDE, making it easy to write, upload, and debug code for your projects. It also supports many Arduino libraries and shields, making it versatile and easy to use.
ws2811 led pixel
s.click.aliexp...
nano brod
s.click.aliexp...

[@HerbertPremasiri]

Dashboard light system ekakuth danna puluwanda

[@RashmikaSajith-k8m]

LED walin hadana video ekk danna puluwanda sir

[@bobmarley1369]

ඔවා ගහන් පාරේ යන්න වෙන් නැ බන්...දඩ තමයි ඉතින් 😋

[@SITHTHA490]

ත්‍රි විල් ලයිට් සිස්ටම් ඔන😊

[@dineth033]

LED බල්බ් වලින් හදන එකක් කියලා දෙන්නකෝ..🥺❤️🌹💗

[@SLAutoMachanic]

අයියේ ඔය රටා ic එක්කට දාන විදිය කියලා දෙන්නකෝ

[@TEKNO2077]

Brother math e wage bike ekata hai karala thibba tikak kal yanakota controller eke awl yanawane ai e

[@ManojManoms]

Drl light gahana widiya kiyanna puluwanda

[@Electronicmanula-r4m]

bick walata back fire hadana vidio akak dannako🤗

[@kasunkakumara5786]

Ayiye side mirror walata led light set karana vidiya kiyannako...

[@DerrickDerrick-m6k]

night rider eka adhana eka ona

[@sanjuautohub9713]

Threewheel ekat supiri charjing thiyana rectifyer ekk one

[@YeshanKavidu]

අයියෙ සුපිරි ❤🎉🎉

[@ChanakaDasanayaka-jj7vh]

මේක පෝන් එකෙන් කරගන්නේ කොහොමද වීඩියෝ එකක් ඔනේ

[@BhanukaDananjaya-s5y]

3v led වලින් කරන එකක් දන්නා පුළුවන් ද

[@sadaruwanadhikari3983]

Aiye led walin barida hadanna

[@anuradhabandara9454]

සුපිරි ❤❤❤

[@DhanushaLankeshaGunawardhana]

Ayye me program eka ic ekakata daganne kohomada. Ehema dagaththama ic eke memory erase wenawada ikmanata

[@lokutuktuk7921]

පල වෙනියා මම ❤

[@SLWeelSquadSLWS]

❤

[@remix6260]

Aiye okata ekavara tone deka thunak danne kohomada?

[@sanjuautohub9713]

Thawa one

[@ruwanchamara7391]

Input 5v output 12v කරන විදිහ ඔනි

[@songHub-hm3bh]

Supiri loku ayiya❤

[@hasithsonal2008]

Oya nano board ekata bulbe kiyak set karanna puluwanda ayiye

[@gadgetwedda]

300

[@all-roundersl2992]

Program karata passe ardino bord eka ain karath wadada ?

[@gadgetwedda]

Ne

[@gayanmalinda475]

Eka set ekaka bulb kiyak tiyeida

[@gadgetwedda]

50

[@rasangaprasad6605]

Aiye oya sirkit ekta tawa light kiyk ghnna pulunda

[@gadgetwedda]

300

[@sahanamiusik9884]

Aiya LED welata set karane kodamada

[@sahanamiusik9884]

Aiya eka kiyala dennako balb set karala thiyenne hai karanna dannane 🥺

[@pasindusandeepa9136]

nano board ekatath 5v d denn oni?

[@gadgetwedda]

Ou

[@oshanv1234]

Me vge three wheel modification ewa oone aiye♥🔥

[@vihangasandeepa9785]

😍😍😍

[@ThanujaDeshan-w7b]

Aiye video ekanm.supiri mese tiyena speker eke coil eka bahi kali dala tiyenne speker eka udet 😢

[@gadgetwedda]

Therune ne

[@ThanujaDeshan-w7b]

@@gadgetwedda speker eka udet ksludala tibbe eka kiuwe

[@shan-wc5np]

👌😮

[@KusandaBopath]

Ayye pksal led natuwa rgb led puluwanda

[@gadgetwedda]

Be

[@chamikalakshan3014]

අයියේ අයියගෙ වට්සැප් නම්බරේ දෙන්නකෝ ඔයා මාර වැඩ්ඩෙක්

[@gadgetwedda]

0710107924

[@AI_Computers_]

❤❤

[@pradeepchathuranga6735]

😍

[@සුභාෂන්8986]

පොඩි තොරණක් හදන හැටිත් ඕනා

[@NimsaraNirmal]

ඔකේ LED වරක් තියන එකක් ඔනි 😚❤️

[@NipunaShehan-x1y]

වට්ස් ඇප් නම්බර් එක දෙන්න පුලුවන් ද

[@gayanmalinda475]

Ali eke 2900k🙄

[@AnuhasSandamal-mq6cl]

Bosa nb eka deko

[@gadgetwedda]

0710107924

[@Pubudu493]

Aiye oyage whatsapp number eka denna puluvnda

[@gadgetwedda]

0710107924