110cc Chinese Pit Bike Engine rebuild (Bottom End)
Вставка
- Опубліковано 10 вер 2024
- In This Video We Rebuild The Bottom End Of The Chinese 110cc Pitbike Engine.
Scott's Shed Im Just A Guy Who Likes Messing About With Motor Cycles
And Engines In My Spare Time.
Camara I Use Is a Gopro 7 White www.amazon.co....
Subscribe Here / @scottsshed
Please follow me for more channel updates
Instagram www.instagram....
twitter / scottsshed
Email scottsshed2020@gmail.com
Thanks for recording and posting! Really helped me out with my project rebuilding two atvs for my kids.
Thanks for the comment 👍
its great to see how people use their own time to provide free education, Thank you
If you can assemble like that first 2mins you done with with the bike 🚲 you are a free man 🤣😂
That brassy clutch washer you hold in your hand at 4:46, you must bend one of those 7 legs into the grove on the backnut ( once backnut is tightened). Otherwise it's gonna fall apart. It might take some time, but it will.
Otherwise, a perfect video. Subscribed
What is that last piece on the clutch with the three ball bearings? Opened mine and it was off in the oil.
That is weird? I have never seen a pit bike with a reverse idler gear before. Are you sure that is not a 110cc atv engine???
Going together well.
Hopefully finish it over the weekend 👍
Hey man I got a question if u could help me out what's the thing next to the bolt for the oil. I believe it's for the Cam but only two bottom bolts and ones for the oil and the other one has the part I need information on and help please and thak u
Is this engine a fully auto or semi auto as I have a 90cc fully auto 4 stroke engine in my pit bike and I want to know what the clutch is.. if you can help thanks if not great video ! Have a good day!
full auto at 5:12 in the video on the right side is the clutch witch i am working on thanks for the comment stay safe 🤘
Transmission gear at 1:10 looks installed upside-down. The raised center part of the gear needs to ride on the center of the bearing.
helpful video lad
Thanks 😊
My second was slipping, took it down & gears look just fine. Anyone have any suggestions. I need help.
I've got a 125cc atv here semi auto with forward and reverse gear. Problem is it'll only go into reverse and neutral. The clutch plates are all worn away, do you think that would be the reason it wont go into forward drive? And if I bought a full new clutch basket with clutch plates init that would sort it or do you think the gears cogs could be knackered also. Thanks
i have similar problem but here it doesn't want to go in reverse N and 1,2,3rd gear works just fine, any1 know where to look for the issue ?
I'm here trying to learn about engines. Your videos are a big help. Are any of the parts being put back together new or just cleaned up? Keep up the good work.
Some are new some a the old parts thanks for the nice words
Hi mate I have a question I have a m2r 125cc and 1st 2nd 3rd gears are perfect when I go into 4th theirs nothing their it's like I've just hit Neutral why is this ?.
Were did you find the internals for bottom end I've looked every were can't find for Chinese atv
What u after I got most of mine from eBay
Hey mate at the 8:30 mark what's the cylinder followed by a spring and a bolt I've undid mine by accident anything I need to know before reinstalling it? Thanks if you could help me out
It’s the cam chain tensioner
Whats that gear called behind that triangle peice
The clutch?
Hi i have some problems with shifting on 125,shoud be play on the shaft where the CLUTCH GEAR weel sits?🙏
The shaft what the clutch sits on ?
@@ScottsShed the other one on left, it looks like flyweel
@@FilipHnizdil no shouldn’t move think it will be the bearing
@@ScottsShed okay tnx
Hi bro are that gaskets original, or it's made out of thin cardboard, or something else?
no there original my friend
I know this video is old but by any chance do you know the gear tooth ratio for the clutch and clutch starter gear for a 125cc engine
Not sure but might have one I could measure
@@ScottsShed thanks id really appreciate it. I was trying to find out how many tooth they are for the 125cc
Wonder if yer can help if possible iv stripped my 125 yx engine gear lever and kick keep jamming it was taken apart to change engine seals as I flooded it with oil the engine is new maybe 2 hours run if that iv taken the engine apart 7 times everything seems fine until I give it a kick and try to go threw the gears there’s only 1 gear after engine is out back together I have 1 washer about 3 mil thick left I can’t remember where it came from and your video doesn’t show the same parts as my engine any help is appreciated
If you remove the clutch cover can u turn the clutch by hand ?
@@ScottsShed it did at 1 point I’ll have to take engine apart again as iv not long got last bolt in …. ( I think ) as I’m left with a washer about 3 mil thick and 1 screw with a washer but the screw could have been dropped from another engine
@@ScottsShed I can turn it 1 way clock wise it’s giving a clicking noise
@@johncarroll9205 some thing is binding up as u take parts off try turning the engin each time then mite be able to find the problem are you from the uk ?
@@ScottsShed yea from Scotland it’s like my gear cluster jams iv got ma clutch off and the cog behind the clutch … the arm inside engine that’s attached to gear lever seems to be disengaging itself
what inspired the bottom end rebuild? can’t get my pit to start and im contemplating doing the same thing
My engine was hard to turn over if u watch the tear down video on the channel u will see all the bearings was no good did yours just stop starting of was did it just get harder and harder to start
Hello, I want to know if a 110cc cylinder is compatible in a 90cc kazuma engine To increase power

Hey man do you how big of a big bore kit I can go on a no names 110cc engine?
What is the socket you used at 05:02 called?!!! I was trying to get this off without one and it was a nightmare 🤣
It’s a castle nut socket can get them off eBay
What is the piece called at the 3:21 mark????
shift drum stopper
Mine seems to be broken. Bike only shifts to first. Any links to where I can find one? Got one off a parts motor from a friend and it is too short. Jams up. Thanks sooo much.
What engine is it for ?
Hey man nice video! At 6:57 you install the arm What’s it called? I have mine apart (again). I replaced a kick starter shaft and got it all back together and running but it sounds like bearings clicking together all the way thru the gears. So took back apart and removed the arm and now it only clicks in neutral but once I shift into a gear noise goes away completely. 😂😂 very weird but any light you can shine would be awesome
Clutch adjuster maybe that’s what the arm thing is for
great video and informative i have a question i bought a used Baja dr90 that doesnt start after verifying the obvious other things to check and coming back good, i found out that the woodruff key was shattered including the crankshaft key slot and the flywheel slot. Everyone is telling me to NOT waste my time buying a new crankshaft and flywheel but im stuck on what to do i cant afford a new engine and buying used engine is also risky what would you recommend thank you
If you want to get the new parts and repair it if that’s some thing u can do then I would myself but up to you hope you sort some thing out 🤟
@@ScottsShed I could do the repair, plus I need to learn how to fix a bike engine anyways since this is my first bike. It’s just a bummer when 95% of people say just buy a new engine……ok then I’ll be handing out my donation jar around lol
@@IamSoloexplorer loads of people thing a new engine is the best option but there not paying for it do I have two UA-cam accounts?
Can you tell me the bolt size that bolts the starter to the motor mine snaped off
Witch one the ones that hold it to the engine ?
where can i buy transmition parts
ebay or lots of online shops
Where did you order you replacement parts, such as but not limited to the gaskets, bearings, etc
Form pit bike spares ltd and red circle motorcycles
hi, great video! should the piston have any play in it? mine does and im wondering if i need to do a rebuild
A small side to side movement is normal but only a Little
@@ScottsShed thanks for your reply mate! I'm wondering is it possible I can send you a video over? Maybe via email or something just to get a better opinion. I'm struggling like there's no tomorrow with my engine and it looks identical to yours in your video (although maybe not as clean lol)
Yeah no problem email in the about section
@@ScottsShed hi mate can't find the email so have dropped you an Instagram message 👍😊
Bro what that thing do at 8:35?
cam chain tensioner
@@ScottsShed thanks. I accidently unsrewed it and thought that was the oil drain plug 😅 i just put it back, hopefully my bike wont brake😂
@@lauriskruklis8338 just check your oil before use it 👌
@@ScottsShed how bad is it to drive it if you overfill it by half cm?
Not really bad but would make sure it’s correct